Home > Article > Backend Development > RGFW Under the Hood: XDrag n Drop
To handle Drag 'n Drop events with X11, you must use the XDnD protocol. Although the XDnD protocol is significantly more complicated than other Drag 'n Drop APIs, it's still relatively simple in theory. However, implementing it is tedious because it requires properly communicating with the X11 server and the source window.
This tutorial explains how to handle the XDnD protocol and manage X11 Drag 'n Drop events. The code is based on RGFW's source code.
A detailed overview of the steps required:
First, X11 Atoms will be initialized. X11 Atoms are used to ask for or send specific data or properties through X11.
Then, the window's properties will be changed, allowing it to be aware of XDND (X Drag 'n Drop) events.
When a drag happens, the window will receive a ClientMessage Event which includes an XdndEnter message telling the target window that the drag has started.
While the drag is in progress, the source window sends updates about the drag to the target window via ClientMessage events. Each time the target window gets an update, it must confirm it received the update; otherwise, the interaction will end.
Once the drop happens, the source window will send an XdndDrop message. Then the target window will convert the drop selection via X11 and will receive an SelectionNotify event to get the converted data.
The target window will handle this event, convert the data to a readable string, and finally send a ClientMessage with the XdndFinished atom to tell the source window that the interaction is done.
A quick overview of the steps required:
1) Define X11 Atoms
2) Enable XDnD events for the window
3) Handle XDnD events via ClientMessage
4) Get the XDnD drop data via ClientMessage and end the interaction
To handle XDnD events, XDnD atoms must be initialized via XInternAtom. Atoms are used when sending or requesting specific data or actions.
XdndTypeList is used when the target window wants to know the data types the source window supports.
XdndSelection is used to examine the data selection after a drop and to retrieve the data after it is converted.
const Atom XdndTypeList = XInternAtom(display, "XdndTypeList", False); const Atom XdndSelection = XInternAtom(display, "XdndSelection", False);
These generic Xdnd atoms are messages sent by the source window except for XdndStatus.
XdndEnter, is used when the drop has entered the target window.
XdndPosition is used to update the target window on the position of the drop.
XdndStatus is used to tell the source window that the target has received the message.
XdndLeave is used when the drop has left the target window.
XdndDrop is used when the drop has been dropped into the target window.
XdndFinished is used when the drop has been finished.
const Atom XdndEnter = XInternAtom(display, "XdndEnter", False); const Atom XdndPosition = XInternAtom(display, "XdndPosition", False); const Atom XdndStatus = XInternAtom(display, "XdndStatus", False); const Atom XdndLeave = XInternAtom(display, "XdndLeave", False); const Atom XdndDrop = XInternAtom(display, "XdndDrop", False); const Atom XdndFinished = XInternAtom(display, "XdndFinished", False);
Xdnd Actions are actions the target window wants to make with the drag data.
XdndActionCopy is used when the target window wants to copy the drag data.
const Atom XdndActionCopy = XInternAtom(display, "XdndActionCopy", False);
The text/uri-list and text/plain atoms are needed to check the format of the drop data.
const Atom XtextUriList = XInternAtom((Display*) display, "text/uri-list", False); const Atom XtextPlain = XInternAtom((Display*) display, "text/plain", False);
To receive XDnD events, the window must enable the XDndAware atom. This atom tells the window manager and the source window that the window wants to receive XDnD events.
This can be done by creating an XdndAware atom and using XChangeProperty to change the window's XdndAware property.
You also must set the XDnD version using a pointer, version 5 should be used as it is the newest version of the XDnD protocol.
const Atom XdndAware = XInternAtom(display, "XdndAware", False); const char myversion = 5; XChangeProperty(display, window, XdndAware, 4, 32, PropModeReplace, &myversion, 1);
Before any events are handled, some variables must be defined.
These variables are given to us by the source window and are used across multiple instances.
These variables are the source window, the XDnD Protocall version used, and the format of the drop data.
int64_t source, version; int32_t format;
Now the ClientMessage event can be handled.
case ClientMessage:
First, I will create a generic XEvent structure to reply to XDnD events. This is optional, but in using it we will have to do less work.
This will send the event to the source window and include our window (the target) in the data.
XEvent reply = { ClientMessage }; reply.xclient.window = source; reply.xclient.format = 32; reply.xclient.data.l[0] = (long) window; reply.xclient.data.l[1] = 0; reply.xclient.data.l[2] = None;
The ClientMessage event structure can be accessed via XEvent.xclient.
message_type is an attribute in the structure, it holds what the message type is. We will use it to check if the message type is an XDnD message.
There are 3 XDnD events we will handle, XdndEnter, XdndPosition, and XdndDrop.
XdndEnter is sent when the drop enters the target window.
if (E.xclient.message_type == XdndEnter) {
First, RGFW inits the required variables.
unsigned long count; Atom* formats; Atom real_formats[6];
We can also create a bool to check if the supported formats are a list or if there is only one format.
This can be done by using the xclient's data attribute. Data is a list of data about the event.
the first item is the source window.
The second item of the data includes two values, if the format is a list or not and the version of XDnD used.
To get the bool value, you can check the first bit, the version is stored 24 bits after (the final 40 bits).
The format should be set to None for now, also make sure the version is less than or equal to 5. Otherwise, there's probably an issue because 5 is the newest version.
Bool list = E.xclient.data.l[1] & 1; source = E.xclient.data.l[0]; version = E.xclient.data.l[1] >> 24; format = None; if (version > 5) break;
If the format is a list, we'll have to get the format list from the source window's XDndTypeList value using XGetWindowProperty
if (list) { Atom actualType; int32_t actualFormat; unsigned long bytesAfter; XGetWindowProperty((Display*) display, source, XdndTypeList, 0, LONG_MAX, False, 4, &actualType, &actualFormat, &count, &bytesAfter, (unsigned char**) &formats); }
Otherwise, the format can be found using the leftover xclient values (2 - 4)
else { count = 0; if (E.xclient.data.l[2] != None) real_formats[count++] = E.xclient.data.l[2]; if (E.xclient.data.l[3] != None) real_formats[count++] = E.xclient.data.l[3]; if (E.xclient.data.l[4] != None) real_formats[count++] = E.xclient.data.l[4]; formats = real_formats; }
Now that we have the format array, we can check if the format matches any of the formats we're looking for.
The list should also be freed using XFree if it was received using XGetWindowProperty.
unsigned long i; for (i = 0; i < count; i++) { if (formats[i] == XtextUriList || formats[i] == XtextPlain) { format = formats[i]; break; } } if (list) { XFree(formats); } break; }
XdndPosition is used when the drop position is updated.
Before we handle the event, make sure the version is correct.
if (E.xclient.message_type == XdndPosition && version <= 5)) {
The absolute X and Y can be found using the second item of the data list.
The X = the last 32 bits.
The Y = the first 32 bits.
const int32_t xabs = (E.xclient.data.l[2] >> 16) & 0xffff; const int32_t yabs = (E.xclient.data.l[2]) & 0xffff;
The absolute X and Y can be translated to the actual X and Y coordinates of the drop position using XTranslateCoordinates.
Window dummy; int32_t xpos, ypos; XTranslateCoordinates((Display*) display, XDefaultRootWindow((Display*) display), (Window) window, xabs, yabs, &xpos, &ypos, &dummy); printf("File drop starting at %i %i\n", xpos, ypos);
A response must be sent back to the source window. The response uses XdndStatus to tell the window it has received the message.
We should also tell the source the action accepted with the data. (XdndActionCopy)
The message can be sent out via XSendEvent make sure you also send out XFlush to make sure the event is pushed out.
reply.xclient.message_type = XdndStatus; if (format) { reply.xclient.data.l[1] = 1; if (version >= 2) reply.xclient.data.l[4] = XdndActionCopy; } XSendEvent((Display*) display, source, False, NoEventMask, &reply); XFlush((Display*) display); break; }
Before we handle the event, make sure the version is correct.
XdndDrop occurs when the item has been dropped.
if (E.xclient.message_type = XdndDrop && version <= 5) {
First, we should make sure we registered a valid format earlier.
if (format) {
We can use XConvertSection to request that the selection be converted to the format.
We will get the result in an SelectionNotify event.
// newer versions of xDnD require us to tell the source our time Time time = CurrentTime; if (version >= 1) time = E.xclient.data.l[2]; XConvertSelection((Display*) display, XdndSelection, format, XdndSelection, (Window) window, time); }
Otherwise, there is no drop data and the drop has ended. XDnD versions 2 and older require the target to tell the source when the drop has ended.
This can be done by sending out a ClientMessage event with the XdndFinished message type.
else if (version >= 2) { reply.xclient.message_type = XdndFinished; XSendEvent((Display*) display, source, False, NoEventMask, &reply); XFlush((Display*) display); } }
Now we can receive the converted selection from the SlectionNotify event
case SelectionNotify: {
To do this, first, ensure the property is the XdndSelection.
/* this is only for checking for drops */ if (E.xselection.property != XdndSelection) break;
XGetWindowpropery can be used to get the selection data.
char* data; unsigned long result; Atom actualType; int32_t actualFormat; unsigned long bytesAfter; XGetWindowProperty((Display*) display, E.xselection.requestor, E.xselection.property, \ 0, LONG_MAX, False, E.xselection.target, &actualType, &actualFormat, &result, &bytesAfter, (unsigned char**) &data); if (result == 0) break; printf("File dropped: %s\n", data);
This is the raw string data for the drop. If there are multiple drops, it will include the files separated by a '\n'. If you'd prefer an array of strings, you'd have to parse the data into an array.
The data should also be freed once you're done using it.
If you want to use the data after the event has been processed, you should allocate a separate buffer and copy the data over.
if (data) XFree(data);
the drop has ended and XDnD versions 2 and older require the target to tell the source when the drop has ended.
This can be done by sending out a ClientMessage event with the XdndFinished message type.
It will also include the action we did with the data and the result to tell the source wether or not we actually got the data.
if (version >= 2) { reply.xclient.message_type = XdndFinished; reply.xclient.data.l[1] = result; reply.xclient.data.l[2] = XdndActionCopy; XSendEvent((Display*) display, source, False, NoEventMask, &reply); XFlush((Display*) display); }
// This compiles with // gcc example.c -lX11 #include#include #include #include int main(void) { Display* display = XOpenDisplay(NULL); Window window = XCreateSimpleWindow(display, RootWindow(display, DefaultScreen(display)), 10, 10, 200, 200, 1, BlackPixel(display, DefaultScreen(display)), WhitePixel(display, DefaultScreen(display))); XSelectInput(display, window, ExposureMask | KeyPressMask); const Atom wm_delete_window = XInternAtom((Display*) display, "WM_DELETE_WINDOW", False); /* Xdnd code */ /* fetching data */ const Atom XdndTypeList = XInternAtom(display, "XdndTypeList", False); const Atom XdndSelection = XInternAtom(display, "XdndSelection", False); /* client messages */ const Atom XdndEnter = XInternAtom(display, "XdndEnter", False); const Atom XdndPosition = XInternAtom(display, "XdndPosition", False); const Atom XdndStatus = XInternAtom(display, "XdndStatus", False); const Atom XdndLeave = XInternAtom(display, "XdndLeave", False); const Atom XdndDrop = XInternAtom(display, "XdndDrop", False); const Atom XdndFinished = XInternAtom(display, "XdndFinished", False); /* actions */ const Atom XdndActionCopy = XInternAtom(display, "XdndActionCopy", False); const Atom XdndActionMove = XInternAtom(display, "XdndActionMove", False); const Atom XdndActionLink = XInternAtom(display, "XdndActionLink", False); const Atom XdndActionAsk = XInternAtom(display, "XdndActionAsk", False); const Atom XdndActionPrivate = XInternAtom(display, "XdndActionPrivate", False); const Atom XtextUriList = XInternAtom((Display*) display, "text/uri-list", False); const Atom XtextPlain = XInternAtom((Display*) display, "text/plain", False); const Atom XdndAware = XInternAtom(display, "XdndAware", False); const char myVersion = 5; XChangeProperty(display, window, XdndAware, 4, 32, PropModeReplace, &myVersion, 1); XMapWindow(display, window); XEvent E; Bool running = True; int64_t source, version; int32_t format; while (running) { XNextEvent(display, &E); switch (E.type) { case KeyPress: running = False; break; case ClientMessage: if (E.xclient.data.l[0] == (int64_t) wm_delete_window) { running = False; break; } XEvent reply = { ClientMessage }; reply.xclient.window = source; reply.xclient.format = 32; reply.xclient.data.l[0] = (long) window; reply.xclient.data.l[2] = 0; reply.xclient.data.l[3] = 0; if (E.xclient.message_type == XdndEnter) { unsigned long count; Atom* formats; Atom real_formats[6]; Bool list = E.xclient.data.l[1] & 1; source = E.xclient.data.l[0]; version = E.xclient.data.l[1] >> 24; format = None; if (version > 5) break; if (list) { Atom actualType; int32_t actualFormat; unsigned long bytesAfter; XGetWindowProperty((Display*) display, source, XdndTypeList, 0, LONG_MAX, False, 4, &actualType, &actualFormat, &count, &bytesAfter, (unsigned char**) &formats); } else { count = 0; if (E.xclient.data.l[2] != None) real_formats[count++] = E.xclient.data.l[2]; if (E.xclient.data.l[3] != None) real_formats[count++] = E.xclient.data.l[3]; if (E.xclient.data.l[4] != None) real_formats[count++] = E.xclient.data.l[4]; formats = real_formats; } unsigned long i; for (i = 0; i < count; i++) { if (formats[i] == XtextUriList || formats[i] == XtextPlain) { format = formats[i]; break; } } if (list) { XFree(formats); } break; } if (E.xclient.message_type == XdndPosition) { const int32_t xabs = (E.xclient.data.l[2] >> 16) & 0xffff; const int32_t yabs = (E.xclient.data.l[2]) & 0xffff; Window dummy; int32_t xpos, ypos; if (version > 5) break; XTranslateCoordinates((Display*) display, XDefaultRootWindow((Display*) display), (Window) window, xabs, yabs, &xpos, &ypos, &dummy); printf("File drop starting at %i %i\n", xpos, ypos); reply.xclient.message_type = XdndStatus; if (format) { reply.xclient.data.l[1] = 1; if (version >= 2) reply.xclient.data.l[4] = XdndActionCopy; } XSendEvent((Display*) display, source, False, NoEventMask, &reply); XFlush((Display*) display); break; } if (E.xclient.message_type = XdndDrop && version <= 5) { if (format) { Time time = CurrentTime; if (version >= 1) time = E.xclient.data.l[2]; XConvertSelection((Display*) display, XdndSelection, format, XdndSelection, (Window) window, time); } else if (version >= 2) { reply.xclient.message_type = XdndFinished; XSendEvent((Display*) display, source, False, NoEventMask, &reply); XFlush((Display*) display); } } break; case SelectionNotify: { /* this is only for checking for drops */ if (E.xselection.property != XdndSelection) break; char* data; unsigned long result; Atom actualType; int32_t actualFormat; unsigned long bytesAfter; XGetWindowProperty((Display*) display, E.xselection.requestor, E.xselection.property, 0, LONG_MAX, False, E.xselection.target, &actualType, &actualFormat, &result, &bytesAfter, (unsigned char**) &data); if (result == 0) break; printf("File(s) dropped: %s\n", data); if (data) XFree(data); if (version >= 2) { reply.xclient.message_type = XdndFinished; reply.xclient.data.l[1] = result; reply.xclient.data.l[2] = XdndActionCopy; XSendEvent((Display*) display, source, False, NoEventMask, &reply); XFlush((Display*) display); } break; } default: break; } } XCloseDisplay(display); }
The above is the detailed content of RGFW Under the Hood: XDrag n Drop. For more information, please follow other related articles on the PHP Chinese website!