Can't connect to iPhone hotspot on computer?

The computer cannot connect to the iPhone hotspot, preventing you from enjoying a convenient network connection? Don't worry! PHP editor Baicao brings a detailed guide to solving this common problem. This article will explore the possible causes of connection failure and provide step-by-step instructions to guide you to resolve the issue and re-establish a stable connection. From network settings to the impact of antivirus software, this guide covers a range of potential factors to ensure you're back online quickly!

1. The computer cannot connect to the iPhone hotspot?

It may be that the wireless network adapter is disabled. Check whether automatic acquisition of IP address and DNS server address is enabled.

1. Turn on the computer and click the Start button.

2. In the opened interface, click the "Settings" icon.

3. In the control panel that opens, click the "Network and Internet" option.

4. In the opened interface, click the "Network and Sharing Center" option.

5. Then in the opened interface, right-click the "Wireless Network Connection" option.

6. Double-click the "Internet Protocol (TCP/IPV4)" option.

7. In the opened interface, check the "Obtain an IP address automatically" and "Obtain a DNS server address automatically" options, and click the "OK" button.

2. The computer cannot connect to the iPhone hotspot?

It may be that the wireless network adapter is disabled. Check whether automatic acquisition of IP address and DNS server address is enabled.

1. Turn on the computer and click the Start button.

2. In the opened interface, click the "Settings" icon.

3. In the control panel that opens, click the "Network and Internet" option.

4. In the opened interface, click the "Network and Sharing Center" option.

5. Then in the opened interface, right-click the "Wireless Network Connection" option.

6. Double-click the "Internet Protocol (TCP/IPV4)" option.

7. In the opened interface, check the "Obtain an IP address automatically" and "Obtain a DNS server address automatically" options, and click the "OK" button.

3. Can’t connect to the computer when the iphone6s plus hotspot is turned on?

It is very likely that there is a problem with the network connection. First turn off the hotspot on your iPhone, then turn it back on, then restart your computer, and try to connect again.

Solution 2:

The iPhone’s hotspot is turned on, but the computer cannot connect. It may also be caused by the computer’s wireless network adapter being disabled. It is recommended that you check whether "obtain IP address and DNS server address automatically" is turned on on your computer.

The checking method is as follows:

On the computer desktop, click the button, then find and click Open, find and click Open in Control Panel, find and click Network and Internet , click in the upper left corner of the interface. Find and right-click, select, find and click "Internet Protocol Version 4 (TCP/IPv4)", then click, and finally check and that's it.

4. Can't connect to the computer when turning on the hotspot on the iPhone?

The personal hotspot of the Apple mobile phone cannot connect to the computer. It may be because the wireless network adapter is disabled. Check whether it is turned on to automatically obtain the IP address and DNS server address. The method is:

1. Turn on the computer and click Start button.

2. In the opened interface, click the "Settings" icon.

3. In the opened control panel, click the "Network and Internet" option. 🎜>4. In the opened interface, click the "Network and Sharing Center" option

5. Then in the opened interface, right-click the "Wireless Network Connection" option. 6. Double-click the "Internet Protocol (TCP/IPV4)" option.

7. In the opened interface, check the "Obtain an IP address automatically" and "Obtain a DNS server address automatically" options, and click " OK" button.

Share

5. Why can’t the iPhone connect to the computer hotspot?

Solution 1:

It is most likely that it is connected to the network Problem, first turn off the hotspot on the iPhone, then turn it back on, then restart the computer, and try connecting again.

Solution 2:

The hotspot on the iPhone is turned on, but the computer is not connected. If the connection fails, it may also be caused by the computer's wireless network adapter being disabled. It is recommended that you check whether the "automatically obtain IP address and DNS server address" is turned on on the computer.

6. Why is the computer connected? Can't connect to the iPhone hotspot?

Maybe the DNS is not set up properly. Right-click the network, click Properties, click Change Adapter Settings, right-click the selected network, click Properties, select the Network tab, and click Internet Protocol Version 4 , click Properties, choose to use the following DNS server address, change the preferred DNS server address to 114.114.114.114, and click OK.

7. The Huawei computer cannot connect to the iPhone’s personal hotspot? 🎜>It may be a connection problem, you can try this:

1. You can open it to see if the wireless network adapter is disabled, just right-click to open it;

2. Check it For the adapter, select, then select Obtain IP address automatically and Obtain DNS server address automatically;

8. The computer cannot connect to the iPhone hotspot and it is not in the area?

Cause analysis: It may be that the computer network and the mobile phone network are not in the same area, because the network server is in another place, and the wifi address connected to your computer is in a different place. In this way, when the computer logs in, the authorization information on the mobile phone is the wifi remote address.

9. The iPhone’s hotspot cannot be connected?

1. Personal hotspot settings

Before using other methods to solve the problem of unusable hotspot, first check whether the operator supports the normal use of the device's personal hotspot. Including operations such as changing operators and restarting hotspots.

Pay attention to check the traffic, network speed, connected devices, etc. when setting up the personal hotspot to see if any restrictions have been set.

2. Restart the personal hotspot

If there are no problems with the operator and settings of the personal hotspot, the most direct and simple way is to restart the personal hotspot.

In some cases, the device may experience errors and it is recommended to restart the personal hotspot and try different connection modes.

3. Restart cellular data

Although using iPhone personal hotspot brings convenience, it definitely consumes a lot of data. Huge changes in data usage may cause data connection problems and possible disconnections.

You can count cellular data usage on iPhone. In iPhone, turn off cellular data or directly switch to airplane mode for a period of time, then restart and turn on cellular data.

You can also set up cellular data.

4. Restart iPhone

Restart or force restart iPhone, especially for the situation where the personal hotspot was used normally yesterday, but today it is inexplicably unable to connect or disconnected;

or update , for failures that occur after downgrading the iOS system, it is recommended to try restarting or force restarting first. If the problem still occurs, you can refer to point 9 to fix it.

5. Change iPhone Name

If we connect iPhone to a different WiFi network, other devices will not be able to connect to the iPhone’s hotspot.

To resolve this network naming conflict, you can change the iPhone name from settings.

Click --, then edit the name of the iPhone and try again.

6. Turn on personal hotspot to maximize compatibility

Starting from the iPhone12 series, 5GHz Wi-Fi hotspot sharing has been supported, and the speed is twice as fast as 2.4GHz Wi-Fi.

But if you want to share it with an old PC, mobile phone or tablet, etc., and the hotspot problem does not appear, you need to turn on the "Maximize Compatibility" function in the hotspot sharing page to force the iPhone 12 personal hotspot to be changed. Using the 2.4GHz Wi-Fi band, the other device can see the personal hotspot in the WiFi list!

7. Reset network settings

If there is an error in the network connection, the personal hotspot will not work. Therefore, resetting network settings is another effective solution to fix personal hotspot errors, and other network issues.

Click on iPhone-- and click to reset network settings.

8. Update operator settings

Like the iOS version, operators will also release new versions to help users solve network connection errors or other problems, but this situation is relatively rare. .

Go to -- to check if there are updated settings. If the "Operator Settings Update" message pops up, click "Update".

Sometimes updating your carrier settings can help your personal hotspot work properly.

9. Repair iOS system

If the above method cannot solve the personal hotspot problem, there may be an iOS system failure.

Compared with restoring and resetting the device (i.e. restoring factory settings) to solve the problem, you can first try a professional iOS system repair tool. After all, restoring settings will completely erase all data in the device.

10. Can’t connect to iPhone’s personal hotspot?

The reason why the Apple hotspot cannot be connected is because the data is not turned on. The steps are as follows:

1. The first step is to open the settings of the phone first.

2. Then select the wireless network in the settings,

3. Then turn off the wireless network switch.

4. Then proceed and click on the mobile network,

5. Then just turn on the mobile network.

6. The last step is to proceed and click on the personal hotspot,

The above is the detailed content of Can't connect to iPhone hotspot on computer?. For more information, please follow other related articles on the PHP Chinese website!