Soft routing for old computers?

Is your old computer idle and wasted? Don't want to spend a fortune on an expensive soft router? Don't worry, PHP editor Xigua has brought you a solution. This article will introduce in detail how to use an old computer to build a powerful soft router, which can save you costs and improve network efficiency. From hardware selection, system installation to software configuration, we will guide you step by step to master the process of building a soft router.

1. Soft routing for old computers?

It’s OK to use a computer for soft routing, but the power consumption is a bit high

Second, how to protect the computer’s soft screen?

How to clean the screen:

1. Screen cleaning: If there are only small dusts and traces, you can directly wipe it gently with a double-sided velvet cleaning cloth; if you encounter stubborn or hard stains, first turn off the power of the monitor and clean the screen Shake the detergent evenly, spray the detergent on the screen surface 20 to 30 cm away from the screen, and wipe it gently; you can also spray the detergent on the surface of the wiping cloth, and then wipe the screen surface.

2. Keyboard cleaning: The keyboard cleaning brush can sweep out dust and debris from the gaps in the keyboard. 3. Cleaning other parts: The keyboard cleaning brush can sweep away dust on various computer components in the chassis, especially fans, processors and other components. Notes: 1. The cleaning cloth will not scratch the surface of the object, but the dust particles scraped up and attached may scratch the surface of the object. Please clean it immediately after use

2. The seamed part of the edge of the cleaning cloth may scratch the surface of delicate objects. , please fold the seamed edge inward before use so that it does not come into direct contact with the wiping object.

3. After wiping the screen with detergent, be sure to dry the surface evenly with a double-sided flannel cloth to avoid leaving traces.

3. What is a computer soft bag?

Soft packaging means that the outer packaging material of the lithium battery is aluminum-plastic film, and there are also copper-plastic film and steel-plastic film.

4. How to close the computer soft area?

1. Turn off the floppy drive: STANDARD CMOS → Drive A: None

2. Tell Windows no floppy drive, Advanced BIOS Features → Report No FDD For Win 95: Yes

3. Disable the floppy disk controller, INTEGRATED PERIPHERALS → Onboard FDC Controller : Disabled

Tips: Among them, the first two items are required. As for the floppy disk controller, there is no need to open it because there is no floppy drive. Even if there is a floppy drive, it is recommended to set "Report No FDD For Win 95" to Yes so that Windows will not search for the floppy drive when it starts.

Due to the large number of BIOS versions, the above options may be slightly different from what you actually see in your motherboard BIOS, but you can achieve the above by turning off the two options "Floppy drive A" and "Floppy drive seek" Effect.

5. How to connect the network cable to the computer soft router?

1. Set up the wireless router, turn on the power, connect the computer to the wireless router (either wired or wireless), and log in according to the default username and password.

2. Use a dynamic IP address in the broadband connection mode (if your original wired router enables a static IP address, then select a static IP address in the broadband connection mode and enter your IP gateway and DNS).

3. Connect to the original router, and connect the network cable interface of the original wired router to the WAN interface of the wireless router. Note that it is a WAN interface.

4. Use your laptop’s wireless network to connect and you can access the Internet.

6. What is the key for soft shutdown of the computer?

1. System program shutdown (WIN): You can use the Start menu - Shut down the computer - Shut down the computer. You can also press CTRL+ALT+DEL together to call Task Manager-Shutdown-Close.

2. Forced shutdown: The power on button is the power off button. You press and release it, which is equivalent to the above shutdown method. If you don't release the button, the computer will be forcibly powered off. If it crashes and you want to restart, there will be a smaller RESET button near the power button. Press it to restart. It is recommended to use the first one. If you can't turn it off, use the second one. Neither of the two soft shutdown methods will work. Please use the third or fourth method, but there will be adverse effects, although they are very, very, very small.

7. Can’t enter bios after soft activation of computer?

Restart the computer. Start the computer in F8 safe mode. Uninstall the installed activation tool. Run the win+x command prompt (administrator): slmgr –ckms to uninstall and restart the computer. Try it

8. How to shut down the computer through soft shutdown?

Enter cmd and then at 23:00 shutdown -s. Set the specific time by yourself. Set a certain time to automatically shut down. If you need the computer to automatically shut down at 20:20, then you only need to select "Run" in the "Start" menu, and then enter at 20:20 Shutdown -s, click "OK", the Task Scheduler service must be started first. In this way, when the computer system time reaches 20:20, the computer will automatically display the "System Shutdown" dialog box, and will automatically shut down after 30 seconds. This 30 seconds is to allow the user to save the currently running work before shutting down to avoid causing problems. unnecessary loss. NOTE: The -s parameter refers to the local computer. .Setting 2: Countdown to automatic shutdown If you need the computer to automatically shut down after 10 minutes, then you only need to select "Run" in the "Start" menu, then enter Shutdown -s -t 600, and click "OK". The computer will then start counting down, and the computer will automatically shut down after 10 minutes. Note: The -t parameter is a countdown command for automatic shutdown, and the 600 parameter is 10 minutes or 600 seconds. .Setting 3: Cancel automatic shutdown. If you have set up automatic shutdown, but changed your mind and do not need to automatically shut down, then you only need to select "Run" in the "Start" menu, then enter Shutdown -a, and click "OK". Can. This will turn off the automatic shutdown that has been set. Note: The -a parameter is the command to cancel automatic shutdown. .Setting 4: Scheduled restart If you need the computer to restart at 20:20, then you only need to select "Run" in the "Start" menu, then enter at 20:20 Shutdown -r, and click "OK". In this way, when the computer system time reaches 20:20, the computer will automatically restart. Note: The -r parameter is the restart command. .Setting 5 Countdown to restart If you need the computer to restart after 10 minutes, then just select "Run" in the "Start" menu and enter. Shutdown -r -t 600, click "OK". In this way, the computer will start to count down, and the computer will restart after 10 minutes. Set six automatic shutdown & prompt before restart. If you need to prompt the "System Shutdown" dialog box during automatic shutdown & restart, you can add the command - c"Message content", note: "ask" (half-width) here is not "or" (full-width), and the message content must not exceed 127 characters.

9. 100-400 computers, what configuration of software routing hardware should be used No problem. Professionals from Soft Routing Software (Aikuai) can also answer this question. Internet cafe technicians can do it.

It is recommended to buy an industrial computer from a certain store.

D525 or 1037 is sufficient. The card processing capacity is also related to your bandwidth. The Jike gateway I use uses multi-line splitting, and it feels good. 10. The computer cannot be soft-shut down and restarted?

You can refer to the following steps:

1. Press and hold the power button, and do not let go during these processes. Open your hand. Generally, the computer will shut down after 5 or 6 seconds. Then release your hand.

2. If you can still open the task manager, select Task Manager Shutdown - Close. 3. Click Start Run and enter. Shutdown-s click OK, and then a forced shutdown will occur.

4. The system is unresponsive. It may be due to too many running programs. Check the task manager to see which running programs are selected. 5. It is best to give it another try. The computer needs to be optimized and cleaned. Sometimes it may be caused by too many junk files.

6. Use anti-virus software to scan it. Sometimes it may be caused by a computer virus.

The above is the detailed content of Soft routing for old computers?. For more information, please follow other related articles on the PHP Chinese website!