Is computer engraving dangerous?

Are you worried about the safety of computer engraving? PHP editor Youzi learned that this issue has attracted much attention. Now, let’s dive into the potential dangers of computer engraving and provide you with practical advice to ensure you operate safely. Read on to learn how to avoid injury and enjoy carving.

1. Is computer engraving dangerous?

Any skill has risks, it mainly depends on whether the operator is familiar with it or not

2. Does computer engraving noise disturb people?

Users who have experience in operating computer engraving machines all know that noise will be generated at the moment when the high-speed rotating cutter head comes into contact with the material. When the noise is greater than a certain decibel, it will be very harsh and affect the neighbors. In fact, generally speaking, the machine It is normal to make noise during operation, but when abnormal noise occurs, it means that there is a problem with the engraving machine itself. The noise is mainly due to the following reasons:

1. Abnormal noise is made during axial walking. This This phenomenon is mostly caused by the X-axis motor bearing being damaged or the X-axis guide rail being covered with dust and dust, which needs to be cleaned and lubricated, or the balls being worn and dropped, etc., which must be dealt with in time.

2. The spindle motor makes abnormal noise when running. The occurrence of such noise indicates that the spindle bearing may have quality problems or the service life of the spindle bearing has expired, or the quality has decreased or is damaged after wear. At this time, you can consider replacing the bearing.

3. How to learn computer engraving?

Computer engraving - follow the steps to learn step by step:

1. First, complete the design of the pattern to be engraved in the design software, select the tool, and automatically calculate the path (path: the tool calculated by the programming software based on the selected tool Motion trajectory), output the path file;

2. Then import the output path file into the engraving machine control software, and then run the simulation;

3. Finally, after confirming that it is correct, you can start processing.

In addition, the faults that are prone to occur during engraving are as follows: 1. Whether the screws in various parts are loose; 2. Check whether the path you are processing is correct; 3. Whether the file is too large and the computer will process it incorrectly; 4. Increase or decrease the spindle speed, To adapt to different materials (generally 8000-24000); 5. Loosen the tool chuck, turn the knife in another direction and clamp it, and put the knife straight to avoid the carving object being not smooth; 6. Check whether the tool is damaged? If so, replace it with a new knife and carve it again.

4. What is computer engraving?

Computer engraving is to use a computer to connect to an engraving machine, and through computer program control, the engraving machine can carve the required pattern. This process is called "computer engraving".

5. What is the difference between hand engraving and computer engraving?

The carvings of handmade wood carvings will be rough. For example, when carving on a flat plate, the grooves will not be very smooth. As for the products that are machine-carved, you will find that they are like paintings, the branches can be very thin, and the grooves are very smooth.

The main difference is: for example: the picture of Yang carving. Computer engraving will be shallower. Hand carving will be darker.

Generally, the current situation is that after computer engraving, it must be repaired by hand. Such as figure sculpture. The eyes of the computer-sculpted character's head must be opened manually. Machines can't do it.

6. What is computer engraving?

Computer engraving is programmed through CAM software, and the computer is used to control the CNC engraving machine to complete the engraving of text or patterns. First, edit the text in the CAM software, modify the font size and font type, and then arrange the layout. Location.

7. Does computer engraving have a future?

Promising

Computer engraving is a technology that uses computer-controlled CNC equipment for engraving processing. With the continuous development of computer technology and CNC equipment technology, computer engraving has broad application prospects in arts and crafts, personalized customization, modeling design and other fields.

Especially in the digital age, people have an increasing demand for personalized goods and customized products. Computer engraving can provide effective solutions to meet these needs. At the same time, computer engraving also has the advantages of high efficiency, accuracy, and good repeatability, making it a very promising manufacturing technology. Therefore, it is foreseeable that computer engraving will continue to develop and be applied in more fields in the future.

8. How long does it take to learn computer engraving?

It is difficult to have a unified answer to this question. After all, different people will have different answers due to different personal qualifications and requirements.

For example, if some elderly people want to learn computer sculpture, it may be a little difficult if they go to some jade carving colleges or schools. The learning in those jade carving colleges is inherently more systematic and very time-consuming, which will waste more time. It takes a long time to finish the finished product. Some jade carving students study for 3-4 years.

Then, for people who lack the ability to understand things and have a certain understanding of learning, learning computer engraving will take a long time, maybe a few months, or maybe a year and a half.

9. What are the characteristics of computer-engraved antique jade?

The edges of computer-engraved lines are flat and have no curvature, and the traces left are basically the same without diversity.

Industry practice, hand-carved products are generally polished by hand, machine-carved products are generally machine-polished. The hand-polished surface will generally have slight unevenness, because the strength of human hands will vary during the polishing process, but machine-polished products The strength is consistent, so the polished surface is relatively smooth.

10. Which computers support computer engraving system?

The main thing is that you need to have an engraving machine and related programs, buy a computer with better configuration and install Windows for support. Mengfei Technology

The above is the detailed content of Is computer engraving dangerous?. For more information, please follow other related articles on the PHP Chinese website!