Can't turn on the computer after cleaning the dust?

The computer cannot be turned on after cleaning the dust. Could it be that cleaning too much dust has damaged the computer? If you encounter this situation, don’t worry. PHP editor Xiaoxin will take you through the possible causes one by one, so that you can easily solve the boot problem.

1. The computer cannot be turned on after cleaning the dust?

If the computer cannot be turned on after cleaning the dust, you can use the following methods to troubleshoot:

1. Pull out the memory stick, wipe the gold finger of the memory stick with an eraser, and wipe off the oxide layer. At the same time, use a hair dryer to blow the slot of the memory module. If there is dust in the slot, you can blow it out. Or you can change the memory module to another slot, but also use a hair dryer to blow out the slot.

2. Check whether the CPU fan is installed correctly and firmly, and see if it was not installed properly when cleaning the dust accumulation on the CPU fan.

3. Check whether the wires inside the chassis are loose, and see if the wires were unintentionally removed or loosened during the cleaning process.

2. The computer cannot be turned on after cleaning the dust?

If the computer cannot be turned on after cleaning the dust, you can use the following methods to troubleshoot:

1. Pull out the memory stick, wipe the gold finger of the memory stick with an eraser, and wipe off the oxide layer. At the same time, use a hair dryer to blow the slot of the memory module. If there is dust in the slot, you can blow it out. Or you can change the memory module to another slot, but also use a hair dryer to blow out the slot.

2. Check whether the CPU fan is installed correctly and firmly, and see if it was not installed properly when cleaning the dust accumulation on the CPU fan.

3. Check whether the wires inside the chassis are loose, and see if the wires were unintentionally removed or loosened during the cleaning process.

3. What are the steps to clean dust on a laptop?

Cleaning steps:

1. First use a brush to clean all the dust inside the motherboard, cooling fan, and laptop, and then use a hair dryer to blow it carefully several times.

2. Use gauze or cotton balls to wipe the core components and motherboard surface with alcohol (remember not to use water). After wiping clean, remember to blow it with a hair dryer to facilitate the evaporation of the alcohol.

3. Use an eraser to wipe the golden finger part of the memory stick, and wipe it back and forth several times,

The above is the detailed content of Can't turn on the computer after cleaning the dust?. For more information, please follow other related articles on the PHP Chinese website!