Where is the computer power switch?

The computer power switch is difficult to find, causing trouble to many novices. PHP editor Xinyi hereby brings you this article to introduce in detail the location and working principle of the computer power button. By reading the following content, you will easily find the power switch and control your computer conveniently.

1. Where is the computer power switch?

The computer motherboard switch is usually located on the lower left front of the motherboard. A computer motherboard, with the CPU at the top, mouse, keyboard, USB port, network card, sound card, etc. sockets at the back. The power switch pin is on the lower left front of the motherboard, usually with the reset switch, hard disk indicator light, and power supply. lights together. As long as the two pins of the power supply are shorted, the computer power supply will work.

2. Where is the power switch of Lenovo computer?

Commercial split desktop computer power switch position: Kaitian/NewThinkcentreM series desktop computers: NewThinkcentreM series tower chassis, NewThinkcentreM8000t switch position is on the front, starting from NewThinkcentreM200t, M8300t, M8400t, M8500t models, the switch position is on the top right side. The switch position of the NewThinkcentre M series small chassis is at the front end of the chassis. The switch position of the Kaitian third-generation tower chassis is at the front of the chassis. The switch position of the Kaitian second-generation M series tower chassis is at the top of the chassis. The switch position of the Kaitian second-generation S series chassis is The position is at the front end of the chassis. The switch position of Kaitian second-generation B series chassis is at the top of the chassis. The switch position of Kaitian first-generation S series chassis is at the front of the chassis. The circle marks the position. Kaitian series products: Kaitian M series products have the switch position at At the top of the chassis, Qitian B series products have two types of chassis panels. The switch position is on the upper right side of the front panel of the chassis. For Qitian E series products, the switch position is on the front end of the chassis panel. Yangtian series products: Yangtian The switch position of Axxxxk series products is at the upper right position of the chassis panel, the switch position of Yangtian Axxxxf series products is at the front end of the chassis panel, the switch position of Yangtian M series chassis is at the top of the chassis panel, and the switch position of early Yangtian split desktop computers The power switch position of H series split desktop computers, taking the H500 model as an example, the power switch position is on the left side of the top of the chassis. The power switch position of Hxxxx series, Gxxxx series, Fxxxx series and Dxxxx series computers is on the right side of the top. , Early home desktop computers: Fengxing K series computers: Fengxing K series and The power switch is on the left side of the top of the chassis, slightly inside. For Fengxing A series computers: Fengxing A series computers and Fengxing V series computers, the power switch is in front of the chassis panel.

3. How to replace the computer power switch?

Step 1: Purchase a switch suitable for the chassis

First, purchase a power switch suitable for the chassis. You can make sure you buy the right switch, depending on the model and size of your case. You can check the manual for your power switch or refer to the datasheet for your case.

Step 2: Disconnect the power cord and wires

Safety measures must be confirmed before replacing the power switch. The power cord must be disconnected first to avoid electric shock. Before removing the power switch, you need to unplug all other wires from the computer to ensure that the computer is truly powered off.

Step 3: Remove the chassis shell

Before replacing the power switch, you need to remove the chassis shell. Remove the screws from the case as far as possible so you can easily remove the case body. Remember to place the case in a spacious place for your convenience. Before removing the casing, remember to check whether there are any residual wires and wire troughs on the casing. If there are any, they must be removed.

Step 4: Disassemble the old power switch

When you are ready to disassemble the power switch, you must carefully remove the switch body from the socket on the chassis. Before removing the power switch, first remove the small buckle between the plugs so that the power switch can be easily removed. Disassembly should be done carefully to avoid misoperation, and inspection should be carried out before disassembly.

Step 5: Replace the new power switch

The interface of the new power switch is the same as the old power switch interface. In order to replace the new power switch, you only need to insert the new switch on the side of the chassis, making sure the slot is flush and the buckle is secure Insert into the slot. After completing the installation, check whether the power switch is normal, and then reinstall the chassis shell.

4. Where is the power switch of the computer?

The computer motherboard switch is usually located on the lower left front of the motherboard. A computer motherboard, with the CPU at the top, mouse, keyboard, USB port, network card, sound card, etc. sockets at the back. The power switch pin is on the lower left front of the motherboard, usually with the reset switch, hard disk indicator light, and power supply. lights together. As long as the two pins of the power supply are shorted, the computer power supply will work.

5. Are all computer power switches universal?

That switch is used to completely cut off the power supply.

When you go out and forget to turn off all the switches, it will prevent high voltage such as lightning strikes from burning the motherboard through the power supply. Moreover, if that switch is turned off, it can ensure that your entire computer does not lose any power.

6. 컴퓨터 전원 스위치가 고장난 경우 어떻게 해야 하나요?

전원 스위치가 손상된 경우 멀티미터를 사용하여 각 구성 요소에 문제가 있는지 확인할 수 있습니다. 예를 들어, 단락이 발생하기 쉽습니다. 이때 각 출력의 전압 포트를 확인하여 저항이 정상인지, 저항 값이 정상 범위 내에 있는지 확인하십시오. 손상된 경우 교체해야 합니다.

2. 때로는 퓨즈가 끊어져서 전원 스위치의 내부 상태를 확인해야 합니다. 예를 들어 PC 보드가 타거나 손상된 경우 그에 따라 원래 회로 부품을 교체해야 합니다. 또한, 파손된 부분이 있을 경우 내부에서 타는 냄새가 날 경우에도 냄새가 날 수 있으니 전원을 차단하고 회로기판을 교체해 보시기 바랍니다.

3. 손상된 경우 저항값도 확인하세요. 저항값이 너무 낮으면 내부 단락이 발생한 것입니다.

Share

7. 컴퓨터 전원 스위치가 고장난 경우 어떻게 수리하나요?

1. 전원 스위치가 손상된 경우 멀티미터를 사용하여 각 구성 요소에 문제가 있는지 확인할 수 있습니다. 예를 들어, 단락이 발생하기 쉽습니다. 이때 각 출력의 전압 포트를 확인하여 저항이 정상인지, 저항 값이 정상 범위 내에 있는지 확인하십시오. 손상된 경우 교체해야 합니다.

2. 때로는 퓨즈가 끊어져서 전원 스위치의 내부 상태를 확인해야 합니다. 예를 들어 PC 보드가 타거나 손상된 경우 그에 따라 원래 회로 부품을 교체해야 합니다. 또한, 파손된 부분이 있을 경우 내부에서 타는 냄새가 날 경우에도 냄새가 날 수 있으니 전원을 차단하고 회로기판을 교체해 보시기 바랍니다.

3. 손상된 경우 저항값도 확인하세요. 저항값이 너무 낮으면 내부 단락이 발생한 것입니다.

8. 컴퓨터 전원 스위치의 열쇠는 무엇인가요?

컴퓨터 전원 스위치는 컴퓨터 전원을 빠르게 켜거나 끄는 데 도움이 되는 특수 버튼입니다. 일반적인 상황에서 컴퓨터 전원 스위치는 "Power" 로고와 함께 섀시 전면에 있습니다. 이 스위치를 눌러 컴퓨터 전원을 켜거나 끌 수 있으며, 키보드의 전원 키를 사용하여 작동할 수도 있습니다. . 컴퓨터를 끄고 싶을 때 이 스위치를 사용하면 장애를 방지하고 컴퓨터의 수명을 연장할 수 있습니다.

또한 일부 새로운 섀시에는 내부에 전원 스위치가 있는 제어판이 함께 제공되어 컴퓨터의 전원을 보다 편리하게 제어할 수 있습니다.

9. Dell 컴퓨터의 전원 스위치를 교체하는 방법은 무엇입니까?

1. 제어판을 열고 전원 옵션을 선택하세요.

2. 전원 버튼의 기능을 클릭하여 선택하세요.

3. "전원 버튼을 누를 때" 드롭다운 목록 상자를 클릭하고 해당 작업을 선택합니다. 전원을 켰는데 전원이 들어오지 않으면 전원이 끊어진 것입니다. 그렇다면 마더보드가 파손되었을 수 있습니다. 전원이 좋은지 나쁜지 판단하려면 전선을 사용하세요. ) 전원 공급 장치를 마더보드에 연결하려면 인터페이스의 녹색 및 검정색 선을 단락시키거나 멀티미터로 테스트하십시오.

10. Tsinghua Tongfang 컴퓨터의 전원 스위치를 연결하는 방법은 무엇입니까?

Tsinghua Tongfang 컴퓨터의 전원 스위치를 연결하려면 호스트 컴퓨터의 전원 소켓에 전원 코드를 연결해야 합니다

The above is the detailed content of Where is the computer power switch?. For more information, please follow other related articles on the PHP Chinese website!