How to choose a computer cable?

How to choose a computer cable? Computer cables are an indispensable part of the computer. They are responsible for transmitting data and signals. Choosing the right connecting cable can not only ensure the stable operation of the device, but also improve transmission efficiency. PHP editor Xinyi brings you this shopping guide to help you understand different types of connecting cables and provide practical purchasing suggestions. This article will introduce in detail common cable types, including HDMI, DisplayPort, USB, network cables, etc., and analyze their characteristics, advantages, disadvantages, and applicable scenarios to guide you in making a wise choice.

1. How to choose a computer cable?

1.4 cable can definitely drive 1.2, but 1.2 is cheaper. If you plan to change to a high brush monitor in the future, buy 1.4. If you don’t want to change, choose 1.2.

2. Introduction to computer cables?

There are two connections between the computer host and the monitor: the power cable and the data cable.

3. How to connect the computer cable?

Corresponding color, insert the 3.5mm plug of the audio cable into the computer-related 3.5mm audio output port (AUDIO OUT) or headphone socket, and insert the RCA plug at the other end into the audio input port (AUDIO IN) of the corresponding power amplifier.

Introducing several wiring methods:

1. Stereo mode (STEREO). Connect the red and black output wires of the left and right channels of the power amplifier to the red and black binding posts of the left and right speakers respectively. Input audio signals from the left and right channel input interfaces of the power amplifier respectively. Use the left and right channel potentiometers of the power amplifier to control the left and right respectively. Channel speaker volume.

2. Bridge mono mode (BRIDGE). Connect the two output red binding posts of the power amplifier to the speakers, but in bridge mode, the output impedance of the power amplifier is doubled, and the power is increased by more than 3 times but less than 4 times (theoretical value is 4 times). The advantage is: both input and output are balanced, and the power is increased. Disadvantages: Increased output impedance. Amplifier bridging is mostly used for bass speakers that require high power.

3. Parallel mono mode (parallel). In this mode, the output impedance of the amplifier is reduced by a factor of 1 and the power is increased by a factor of 1. Most of today's low-impedance high-power speakers use this connection method. Different brands of power amplifiers have different connection methods! The two output red binding posts of the parallel mono mode (parallel) power amplifier are connected with a route, and then one red end and one black end are used as output terminals to connect to the speaker, and the audio signal is input from the left channel input interface of the power amplifier. Leave the right channel interface empty and use the left channel potentiometer of the power amplifier to control the volume of the speaker.

Extended information:

Notes on connecting power amplifiers and speakers

1. Pay attention to power supply:

Audio equipment must have a dedicated power supply and standard voltage, and must be separated from the lighting power supply. After you have a dedicated power supply, you must also have a stable and reliable power socket. You can try to use a "power sequencer". Although the cost increases, the stability and ease of use are improved. In short: it is crucial to connect the power supply of all audio equipment correctly and securely. Another thing to note: some imported equipment will have 110V and 220V selection switches in the power supply. In my country, you must confirm that the 220V position is selected before connecting to power.

2. The quality of the speaker cable:

Try to use thicker and shorter all-copper special speaker cables. When connecting, be sure to distinguish the positive and negative poles and avoid short circuits, especially professional four-core or more speaker plugs. The few binding posts are very small, so be careful when wiring.

3. Pay attention to the length of the signal line:

When connecting devices, try to use shorter signal lines to save costs and reduce line resistance and interference. Under normal circumstances, the longest signal line using balanced transmission can be about 300 meters, while unbalanced lines cannot be used for long-distance transmission. The signal line of the power amplifier should be balanced as much as possible. If there are multiple power amplifiers in the system, it is best to use a signal amplification distributor to separate a sufficient number of signal lines without attenuation for each power amplifier to use independently, which can reduce system noise. , reduce hidden dangers and improve signal-to-noise ratio.

4. Pay attention to the grounding of the equipment:

It is very important to correctly connect the ground wire to all audio equipment. Good grounding can reduce the interference of equipment signal transmission and improve the stability of the equipment. It should be noted that the grounding wire must be made according to the grounding standard of the lightning protection line, that is, the conductor buried underground must be rust-proof, have good contact, and be buried deep. It must not be shared with the grounding wire configured with the three-phase power line. Not only does it not reduce the noise in the sound system, it can also easily damage the equipment.

5. Pay attention to signal inversion and short circuit:

Short circuit of signal lines often causes silent faults, but it is very troublesome to check, unless the signal lines are removed one by one and tested with a multimeter, so be especially careful when welding the wires.

4. How many types of computer connection cables are there?

Data cables mainly pass through computer serial ports, parallel ports, and USB interfaces. Common data cable types include: HDMI cable, VGA cable, and DVI cable. There is also a DP cable for laptops

5. Tips for purchasing and using computer cables

Computer cables are one of the important accessories for connecting computers and their peripheral devices. Whether you are connecting peripherals such as monitors, keyboards, and mice to the computer host, or connecting the computer to network equipment or other devices, various types of cables are indispensable. Choosing the right computer cable can not only ensure stable transmission between devices, but also improve the performance and user experience of the entire system.

Common computer connection cable types

Common computer connection cables mainly include the following types:

VGA cable: used to connect the computer host and monitor and transmit analog video signals. HDMI cable: used to connect computer hosts and high-definition display devices to transmit digital video and audio signals. DVI cable: used to connect the computer host and monitor to transmit digital video signals. USB cable: used to connect the computer host and various peripheral devices, such as keyboard, mouse, USB flash drive, etc., to achieve data transmission and device power supply. Network cable: used to connect computers to network devices, such as routers, switches, etc., to achieve network communication. Audio cable: used to connect the computer host and audio equipment, such as speakers, headphones, etc., to transmit audio signals.

Things to note when purchasing computer cables

When purchasing computer cables, you need to pay attention to the following points:

Wire quality: Choosing high-quality wires, such as copper core wires, can ensure the stability and reliability of signal transmission. . Cable length: Choose the appropriate cable length according to the actual usage scenario. It should not be too long and cause messy wires, nor too short to affect the placement of the device. Interface type: Make sure the interface type of the connecting cable matches the device port, such as HDMI interface corresponding to HDMI cable, USB interface corresponding to USB cable, etc. Transmission rate: For scenarios such as high-definition video and large-capacity data transmission, choose a connection cable that supports higher transmission rates, such as HDMI 2.0, USB 3.0, etc. Shielding performance: Choosing a connecting cable with good shielding performance can effectively suppress electromagnetic interference and improve signal transmission quality.

Tips for using computer cables

When using computer cables, you also need to pay attention to the following points:

Correct connection: Make sure the interfaces at both ends of the cable are in the correct direction to avoid damage caused by forced plugging and unplugging. Wire protection: Reasonable wiring to avoid excessive bending or external extrusion of the connecting wire, and extend the service life of the wire. Regular inspection: Regularly check the status of the connecting cable, and promptly discover and replace damaged cables. Choose the appropriate length: Choose a connecting cable of appropriate length according to the actual usage scenario. It should not be too long, causing the wires to be messy, nor too short, affecting the placement of the device. Pay attention to anti-static: When connecting or disconnecting wires, pay attention to anti-static to avoid damage to the equipment caused by static electricity.

In short, choosing the right computer cable and using it correctly can not only ensure stable transmission between devices, but also improve the performance and user experience of the entire system. I hope that through this article, you can better understand the skills of purchasing and using computer cables. Thank you for reading!

6. How many types of computer cables are there?

HDMI cable, VGA cable, DVI cable and laptop DP cable

7. Do I need to install the inkjet printer and computer cable?

General desktop:

1. Install the host power cord

2. Install the connection cable between the monitor and the computer host

3. Install the monitor power cord

4. Install the USB connection cable for keyboard and mouse

Laptop:

1. Install the host power cord

2. Install the USB cable of the mouse

If you have some special equipment, you need to install other things, such as a wireless mouse.

8. The computer connection cable is broken, what should I do?

1. First check whether the USB interface or PS (old-fashioned pinhole) interface on the keyboard and host is loose. If the problem disappears after pulling it out and plugging it in again, it should be caused by looseness or aging.

2. After eliminating the above reasons, use Driver Wizard to detect whether the keyboard driver needs to be updated or does not match. The method is to uninstall the original driver, download the appropriate driver and install it - restart the computer. Uninstall method: My Computer - Right-click Properties - System Properties, select Hardware - Click Device Manager - Select Keyboard - Right-click on the expanded item below - Uninstall - Use Driver Wizard to automatically search for keyboard driver - Install the keyboard drive.

3. There is another situation that is easily overlooked and the most common cause: Check whether there is an electric vehicle charger or other high-power charger connected to the computer's wiring board slot, causing the line voltage to be too low, causing the keyboard to malfunction. To determine whether this is the case, just unplug the external charger from the computer's power strip and troubleshoot.

4. If none of the above conditions apply, it is recommended to replace the keyboard.

9. What will happen if the computer cable is broken?

If the cable connecting the host to the monitor is broken, the computer host can be turned on but there is nothing on the monitor. In other words, how does your host work and cannot be seen on the monitor? It can’t be seen on the monitor. How did you say it worked in the early days? So after buying a data cable of the same model and replacing it, there will be no problem. If the power cord is broken, the monitor will not respond and the signal will not light up. . If the signal connection cable from the monitor to the host is broken, the monitor will prompt that there is no signal. Of course, if there is no signal, it may also be a problem in the host, but you can try changing the cable first to know which part it is. Problem.

10. 補聴器とコンピューターケーブルはどこで購入できますか?

補聴器やコンピューターケーブルは、電化製品店、医療機器店、オンラインショッピングプラットフォームなどで購入できます。

これらの場所には、顧客のニーズに応じて対応する製品やサービスを提供できる専門の販売スタッフまたはカスタマーサービススタッフがいます。

電気店では、補聴器やコンピューターのケーブルなど、さまざまな種類のケーブルを見つけることができます。

これらのケーブルは通常、標準インターフェイスを備えており、ほとんどの補聴器やコンピューターと互換性があります。

医療機器店でも補聴器とコンピューターの接続ケーブルを見つけることができます。これらのケーブルは通常、より専門的で補聴器の使用に適しています。

オンライン ショッピング プラットフォームで、「補聴器とコンピューター ケーブル」というキーワードを検索すると、関連商品が見つかります。

購入する前に、製品のブランド、モデル、インターフェースのタイプ、その他の情報に注意して、接続ケーブルが補聴器およびコンピューターと互換性があることを確認する必要があります。

操作手順:

1. 補聴器とコンピュータ間のインターフェースのタイプを確認し、対応する接続​​ケーブルを選択します。

2. ケーブルの一端を補聴器インターフェイスに接続し、もう一端をコンピュータのオーディオ出力インターフェイスに接続します。

3. コンピューターの電源を入れ、オーディオ設定インターフェイスに入り、オーディオ出力を「ヘッドフォン」または「スピーカー」に設定します。

4. 音量を調整し、ケーブルが適切に機能しているかどうかをテストします。

接続ケーブルの品質と使用法が補聴器の効果に影響することに注意してください。より良い品質の接続ケーブルを選択し、説明書に従って正しく使用することをお勧めします。

The above is the detailed content of How to choose a computer cable?. For more information, please follow other related articles on the PHP Chinese website!