Blind spot monitoring failure?

Is the car’s blind spot monitoring system malfunctioning? don’t worry! PHP editor Apple will explain the cause and solution of the failure in detail. This article will take an in-depth look at common problems that cause blind spot monitoring systems to fail, and provide practical solutions for each problem. Read on to learn how to diagnose and repair your blind spot monitoring system to keep you safe on the road.

1. Blind spot monitoring failure?

The reasons for the failure are as follows:

1. The camera is dirty or malfunctioning.

When the camera is dirty, the blind area cannot be monitored and the system is judged to be faulty. At this time, you only need to clean or wipe the camera to solve the problem. If the camera is faulty, it needs to be replaced. The price of the 4S store is 400~600 yuan per unit. Free claims during the warranty period. replace.

2. The camera wiring harness is loose.

Looseness or poor contact of the camera wiring harness will also cause the blind spot monitoring system to report a fault. You need to disassemble the parts in the camera area and use a multimeter to check. If there is a problem with the wiring harness, you need to replace it. The 4S store quotes about 300 yuan, and you can claim for free during the warranty period. Replace;

If it is just loose, plug it in again, straighten it out, and then tighten it to solve the problem.

3, System false alarm.

The software system sometimes malfunctions occasionally. At this time, you only need to use the OBD VDS tool and clear the current fault code from the background to solve the problem.

4. The car owner made a misjudgment.

The blind spot monitoring while driving is parallel assist, which is available in Qixiang and Qiling versions, but not in Qiyue;

And this set of blind spot monitoring (merging assist) has speed requirements, only speed When it is greater than 30km/h, it will only prompt if there is a car or obstacle approaching within 7m of the oncoming vehicle from behind. Car owners need to understand this to avoid misdiagnosing faults.

2. Cadillac tire pressure monitoring failure?

The reasons for Cadillac xt6 tire pressure failure: 1. The tire pressure is not within the normal range;

2. The tire is deflated due to air leakage or nails; 3. The tire pressure is too high.

If the car tire pressure fault light comes on, it means that the car tire is faulty. The specific reasons are as follows:

1. The car hit hard objects such as nails, broken glass, etc. while driving.

2. Air pressure is very important for tires. Too high or too low air pressure will shorten the service life of the tire. Too high air pressure will cause the tire cord to be overstretched and deformed, and the elasticity of the tire will decrease. Too low tire pressure will shorten the life of the tire. The deformation of the tire increases, and cracks are prone to appear on the sidewall. At the same time, bending movement occurs, resulting in excessive heat and aging of the tire.

3. When the tire pressure monitoring system warning light comes on while driving, it means that you have been driving at low pressure for a period of time. Do not panic at this time, stay calm, and reduce the speed to avoid turning the steering wheel quickly and braking suddenly.

3. Is the exhaust gas monitoring fault light on?

The emission control system indicator light will illuminate when the ignition switch is turned on. The indicator light must go out after starting the engine. If the indicator light does not go out after starting the engine, or lights up or flashes while driving, it indicates that there may be unstable operation in the emission control system and excessive exhaust gas quality. Generally: the oil added is not good!

4. Indirect tire pressure monitoring failure?

Indirect tire pressure monitoring failure is caused by damage to the wheel speed sensor or poor circuit contact. Indirect tire pressure monitoring requires comparing the speed difference between tires through the wheel speed sensor of the car's ABS anti-lock braking system to achieve the purpose of monitoring tire pressure.

Indirect tire pressure monitoring failure

Tire pressure monitoring system is referred to as TPMS, which is the abbreviation of tire pressure monitoring system. This technology can automatically monitor various tire conditions in real time by recording tire speed or electronic sensors installed in the tires, and can provide effective safety protection for driving.

The working principle of indirect tire pressure monitoring is that when the air pressure of a certain tire decreases, the weight of the vehicle will make the rolling radius of the wheel smaller, causing its rotation speed to be faster than other wheels. By comparing the speed difference between tires to monitor tire pressure, the indirect tire alarm system actually relies on calculating the tire rolling radius to monitor air pressure.

How to remove the tire pressure monitoring light from being on. The tire pressure monitoring light is on due to a puncture in the tire. This situation is usually caused by a very slow air leak. It is difficult to find out which tire it is for a while. You can use a tire pressure gauge to measure it. If there is a lack of air, Just make up for it, and then check whether the tire pressure warning light goes out. If it goes off at the time but comes on again a few days later, the tire needs to be inspected.

5. How to solve the blind spot monitoring failure?

1. By installing two 24GHz radar sensors in the rear bumper of the car, it automatically starts when the vehicle speed is greater than 10KM/H, and sends out detection microwave signals in real time to a range of 3 meters to the left and 8 meters behind, and the system detects the reflected signals. The microwave signal is analyzed and processed to know the distance, speed and direction of movement of the vehicle behind;

2. Through the system algorithm, fixed objects and far away objects are excluded. When a vehicle approaching in the blind spot is detected, the indicator light flashes. At this time, the driver cannot see the vehicle in the blind spot, but he can also know through the indicator light that there is a vehicle behind him. A vehicle is approaching and there is a risk of collision when changing lanes. If the driver still does not notice the indicator light flashing and turns on the turn signal to prepare to change lanes, the system will sound a beeping voice alarm to remind the driver again. It is dangerous to change lanes at this time and it is not advisable to change lanes;

3. Through the entire driving process, continuous detection and reminders are provided to prevent potential dangers caused by bad weather, driver negligence, rearview mirror blind spots, novices on the road, etc. And cause traffic safety accidents.

6. The exhaust gas monitoring system fault light is on

The exhaust gas monitoring system fault light is on. As car enthusiasts, we all know that this is a very common problem. When we see this warning light on the dashboard of our vehicle, the first thing to do is to realize that this may mean that the system is malfunctioning. At this time, we need to check and solve the problem in time to ensure the normal operation and safety of the vehicle.

Possible causes of exhaust gas monitoring system failure

The exhaust gas monitoring system is a very important system on the vehicle. It is responsible for monitoring and controlling the exhaust gas emitted by the vehicle. When the system fails, it may cause vehicle emissions to exceed standards, impact the environment and even violate regulations. There are many reasons why the exhaust gas monitoring system fault light comes on, common ones include:

Sensor failure: The sensor in the exhaust gas monitoring system may malfunction, causing the system to be unable to accurately monitor exhaust emissions. Wiring failure: Problems such as poor wiring connections or short circuits may cause the monitoring system to fail to work properly. Parts wear: Parts in the system such as valves, nozzles, etc. may wear out due to long-term use, affecting the normal operation of the system.

How to deal with the exhaust gas monitoring system fault light coming on

When the exhaust gas monitoring system fault light comes on, we can take the following methods to deal with it:

Check the vehicle manual: First, you can check the vehicle's instruction manual to understand the possible reasons and solutions for the exhaust gas monitoring system fault light coming on. method. Check the fault code: You can use a diagnostic tool to read the vehicle's fault code and determine the specific problem based on the fault code. Professional maintenance: If you cannot solve the problem by yourself, it is recommended to contact a professional car repair shop for inspection and maintenance in time.

Exhaust gas monitoring system maintenance and upkeep

In order to avoid exhaust gas monitoring system failures, we can also take the following measures to maintain and maintain the system:

Regular inspection: Regularly check various components of the exhaust gas monitoring system to ensure that the system is working properly. Pay attention to driving habits: Good driving habits can reduce the load on the exhaust gas monitoring system and extend its service life. Replace parts in time: If problems are found with parts in the exhaust gas monitoring system, replace them in time to avoid system failure.

Conclusion

The exhaust gas monitoring system fault light coming on is a common problem that needs attention. Through timely inspection and maintenance, we can avoid the inconvenience and safety hazards caused by system failures. I hope the above content can bring you some help. I wish you a happy driving and safe travel!

7. How to solve the tire pressure monitoring failure?

The solution to tire pressure monitoring failure is:

1.

Get out of the car and check to confirm that the tires are in normal condition and there is no air leakage;

2.

Pull out the key and reinsert it to start;

3.

If there is still no tire pressure monitoring, you can start the car and drive at low speed for about five or six minutes, and most of them can display the tire pressure;

4.

Remove the negative pole of the car battery and install it after a few minutes, then insert the key to reset the central control It can also display normally;

5.

The battery is out of power, and the problem can be solved by replacing the battery.

8. Valeant tire pressure monitoring failure?

1 There may be a malfunction2 The Valeant tire pressure monitoring system may malfunction, such as sensor damage, control module failure, poor electrical contact, etc., resulting in system failure3 If there is a failure of the Valeant tire pressure monitoring system, the car owner should contact you in time Professional maintenance personnel perform maintenance to ensure driving safety. At the same time, car owners can also check whether the tire pressure reaches the specified value to ensure normal use of the tires.

9. Tire pressure monitor failure?

Causes of tire pressure monitor system failure:

1. Tire blowout, the tire pressure monitoring light turns on due to the tire blowout. In this case, the air leakage is usually very slow, and it is impossible to find which tire it is. At this time, you can use a tire pressure meter to check. If it's deficient, fill it up and watch the tire pressure warning light. If it comes on again after a few days, it's time to pick up the tire and check it.

2. The tire pressure is too high. When the tire pressure monitoring light comes on, sometimes the tire pressure is too high. Standard tires: 2.4-2.5 bar; reinforced tires: 2.8-2.9 bar; maximum air pressure: should not be greater than 3.5 bar. Therefore, when the tire pressure exceeds 3.0 bar, the tire pressure monitoring light will be triggered. At this time, you need to slowly drive the car to an auto repair shop to adjust the tire pressure.

3. Driving with low tire pressure for too long. Due to driving with low tire pressure for too long, the tire pressure monitoring light comes on. In this case, the tire pressure of a certain tire is usually too low. High-speed operation causes the tire temperature to increase, which in turn causes the tire pressure to increase. At this time, you should stop and rest or replace the spare tire in time.

4. The tire pressure is too low. Because it has not been inflated for a long time, the tire pressure is too low, and the tire pressure monitoring light comes on. When the air pressure is lower than 1.8, the tire pressure monitoring light will come on. Regularly check whether the tire pressure detector is normal. If the tire pressure is low, inflate the tires promptly.

5. The tire pressure sensor is damaged or the receiving controller is faulty. The internal battery of the sensor is exhausted due to quality problems or long use of the sensor. If the control unit fails to receive a signal from the sensor, the fault light will illuminate. For vehicles with a separate tire pressure monitoring and control unit, the fault light will turn on if there is a problem with the control unit itself. The tire pressure sensor or receiving controller needs to be replaced in time.

10. What is the cause of the failure of the blind spot monitoring system?

The reasons for the failure are as follows:

1. The camera is dirty or malfunctioning.

When the camera is dirty, the blind area cannot be monitored and the system is judged to be faulty. At this time, you only need to clean or wipe the camera to solve the problem. If the camera is faulty, it needs to be replaced. The price of the 4S store is 400~600 yuan per unit. Free claims during the warranty period. replace.

2. The camera wiring harness is loose.

Looseness or poor contact of the camera wiring harness will also cause the blind spot monitoring system to report a fault. You need to disassemble the parts in the camera area and use a multimeter to check. If there is a problem with the wiring harness, you need to replace it. The 4S store quotes about 300 yuan, and you can claim for free during the warranty period. Replace;

If it is just loose, plug it in again, straighten it out, and then tighten it to solve the problem.

3. System false alarm.

The software system sometimes fails occasionally. At this time, you only need to use the OBD VDS tool and clear the current fault code from the background to solve the problem.

4. The car owner made a misjudgment.

The blind spot monitoring while driving is parallel assist, which is available in Qixiang and Qiling versions, but not in Qiyue;

And this set of blind spot monitoring (merging assist) has speed requirements, only speed When the speed is greater than 30km/h, it will only prompt if there is a car or obstacle approaching within 7m of the oncoming vehicle. Car owners need to understand this to avoid misdiagnosing faults.

The above is the detailed content of Blind spot monitoring failure?. For more information, please follow other related articles on the PHP Chinese website!