Home > Article > Computer Tutorials > Gree b4 fault code?
A long-standing question: What does the Gree air conditioner B4 fault code mean? PHP editor Youzi provides an in-depth explanation of this issue to help users solve their problems. If you encounter a Gree air conditioner B4 fault code, please continue reading this article to learn about the cause and solution of the fault and solve your urgent needs.
Causes and solutions that cause the air conditioner to display fault code b4:
1. Indoor evaporator sensor action error: The temperature sensor is abnormal or damaged. It is recommended to contact after-sales or a professional third-party testing agency to replace the sensor.
2. Aging of the temperature sensor cable: The aging of the temperature sensor cable will cause data and instructions to be unable to be transmitted to the air conditioner host normally, causing the air conditioner to report failure and require replacement of the temperature sensor.
Solution:
1. Plug in the power cord tightly, check the plug on the plug board, and confirm that the plug board is powered on.
2. Confirm that the wire from the host power supply to the plug-in board is good, then take the power supply and connect it to the 24P plug of the motherboard. Short-circuit the green and any black wires. If the power fan is spinning, it means there is no problem with the power supply. If the power fan is not spinning, it means the power supply is bad. Yes, replace the power supply with a new one.
3. After confirming that there is no problem in the above 2 steps, unplug the switch wire connecting the motherboard and the front panel of the chassis, and use a screwdriver to short-circuit the two pins of the switch. If the fan turns, it means there is no problem with the motherboard. If the fan does not turn, it probably means there is no problem. It's a motherboard problem, please contact professional maintenance personnel.
It is a power switch failure: When the power switch button is aged and cannot be reset in time after being pressed, so that the switch is always on, this will occur. After pressing the power switch, the host starts to power up. But the phenomenon of automatic shutdown after 4 seconds
2. The RESET switch or jumper is short-circuited: Although there are few chances of such faults, as the computer usage time increases, the non-self-locking button switch used by the RESET key will Due to elastic failure, the RESET switch button cannot be reset in time after being pressed due to elastic failure, resulting in the always-on state; or because the button on the front panel of the chassis is not installed in place or is deformed, the RESET switch button cannot be reset in time after being pressed. Left on for a long time.
Then another reason is that during our maintenance process, we accidentally caused a RESET when pulling and unplugging
. Indoor evaporator sensor action error: The temperature sensor is abnormal or damaged. It is recommended to contact after-sales or a professional third-party testing agency to replace the sensor.
2. Aging of the temperature sensor cable: Aging of the temperature sensor cable will cause data and instructions to be unable to be transmitted to the air conditioner host normally, causing the air conditioner to report failure.
Gree air conditioner fault code b4 is solved in this way.
It may be due to the following situations:
1. The plug of the washing machine has poor contact, and the power plug can be replaced.
2. The power switch of the washing machine is malfunctioning and there is no power. Check the power cord of Midea's drum washing machine. Use a multimeter to set the ohm level. If the power switch jumps up and resets immediately after pressing the power switch, the power switch may be damaged and the power switch should be replaced;
3. The fuse of the washing machine is burned out and you need to find the manufacturer to replace it under warranty.
Regarding the question of what does b4 mean when the computer displays, my answer is:
B4 means that the memory cannot pass the inspection. The reason may be a quality problem with the memory or motherboard, or poor contact between the memory and the motherboard! If your computer is damaged by non-human factors during the warranty period, the warranty is unconditional. If it is no longer within the warranty period, the price of repairing the memory and motherboard will be different, probably between 50 and 150.
1. Indoor evaporator sensor action error: The temperature sensor is abnormal or damaged. It is recommended to contact after-sales or a professional third-party testing agency to replace the sensor.
2. Aging of the temperature sensor cable: Aging of the temperature sensor cable will cause data and instructions to be unable to be transmitted to the air conditioner host normally, causing the air conditioner to report failure.
Gree air conditioner fault code b4 is solved in this way.
1. Indoor evaporator sensor action error: The temperature sensor is abnormal or damaged. It is recommended to contact after-sales or a professional third-party testing agency to replace the sensor.
2. Aging of the temperature sensor cable: Aging of the temperature sensor cable will cause data and instructions to be unable to be transmitted to the air conditioner host normally, causing the air conditioner to report failure.
Gree air conditioner fault code b4 is solved in this way.
Computers are an indispensable tool in our daily lives and work, but problems that come with them also happen from time to time. When a computer fails, how should we quickly troubleshoot these problems? Don't worry, follow us and learn some common computer troubleshooting techniques.
First of all, when there is a problem with the computer, we need to calm down and conduct a preliminary analysis of the fault. For example, is it a hardware failure or a software problem? Based on the fault performance, we perform targeted troubleshooting.
1. The computer cannot be turned on
Check whether the power socket and power cord are connected properly. Clean the dust inside the computer, check whether the power supply is normal and eliminate hardware faults, such as motherboard, memory, etc.2. The computer runs slowly
Clean up system junk files and unnecessary programs. Upgrade hardware, such as adding memory sticks, replacing solid-state drives, optimizing system startup items and services3. Blue screen of death
Check for hardware compatibility issues, update drivers and system patches, run the system’s own fault detection Tools4. The computer cannot connect to the Internet
Check whether the network cable or Wi-Fi connection is normal. Restart the router and modem and check the network settings and firewall settingsThrough the above methods, I believe most common computer problems can be solved. But for some complex failures, we can also seek help from professionals. After all, safety comes first. I hope these tips can help friends who encounter computer problems!
Thank you for reading this article. I hope the above content can help you better solve computer failure problems.
The Passat b4 computer diagnostic interface is located on the lower right side of the instrument panel, inside the decorative panel, and is a 16-hole interface.
The above is the detailed content of Gree b4 fault code?. For more information, please follow other related articles on the PHP Chinese website!