Registry failure always occurs when starting the computer?

What should I do if a registry failure always occurs when the computer is turned on? I believe there are many friends who have encountered this problem. PHP editor Apple will introduce this problem to you today and teach you how to solve it. The following will introduce in detail the reasons and solutions for registry failure recovery. I hope it will be helpful to you.

1. Registry failure always occurs when the computer is turned on?

My computer now boots up normally and I cannot access the desktop. The screen is black with a mouse pointer. Then press the power button to force shutdown and then boot up to enter the desktop normally. I have reinstalled different systems, but the problem remains the same. And after entering the desktop and clicking restart, you can boot into the desktop normally. I also reinstalled the memory module, but it didn't work. What's wrong?

2. After the computer is turned on, it always prompts for registry failure recovery. How to deal with it?

1) Turn on the computer and press F8 without moving to select safe mode to enter the system, select Start/Run, enter msconfig and press Enter, open the system configuration utility, select Start, look inside to see if there is a "ScanRegistry" option, if there is, cancel the previous one Check the box and press OK to restart the computer (if you can enter the system in normal mode, follow the above method in normal mode. If there is no such option, see the method below).

2) If it still doesn’t work, it may be a memory problem. If so, please check it.

3) In addition, there may be a problem with the disk. Use the following method to repair it. This is a disk problem. Please repair it (repair each disk or only C). The system's own disk repair method: The specific steps are as follows: Select the drive letter C in My Computer, right-click the mouse and select Properties. In the pop-up drive properties window, select "Tools → Start Checking" and select "Automatically Repair Files" System Error" and "Scan and recover bad sectors", and then click Start. The scan time will vary depending on the disk capacity and scan options (after following the above method, a box will pop up, click Yes, and it will automatically shut down After booting up to repair, Win78 selects the scheduled disk check button). Bad sectors on the hard disk will cause the computer system files to be damaged or lost, and the computer will be unable to start or crash. Bad sectors on the hard disk can be repaired using NDD Disk Utility or Scandisk. If the fault persists, please restore the system or reinstall it (if it still doesn't work, format the hard drive, repartition it, and reinstall it. If that doesn't work, replace the hard drive or do some maintenance).

3. Will resetting the computer registry restore it?

Resetting the computer registry will clear all registry settings, including user and system settings. If the registry on your computer has been damaged or has some problems, resetting the registry may restore some of the affected settings.

However, resetting the registry may also cause some software or operating system components to not function properly or be unable to access certain settings, which requires reinstalling or resetting the software or operating system to resolve.

Therefore, before resetting the registry, it is a good idea to back up your computer and registry to ensure that you can revert to a previous state if needed.

4. Will registry failure affect the computer?

The registry is the soul of the entire system. It does not affect your use of errors. It does not matter. If it is serious, it can only be restored by reinstalling. You can use software such as 360 Optimization Master to repair the registry. You can only use it to see if there is any impact. You delete the files and then restore them. It is recommended that you try to fiddle with the registry as little as possible. Besides, it is impossible to retrieve deleted files even if you mess with the registry. You can use software to retrieve accidentally deleted files. 5. Pop up the Windows registry How to solve fault recovery?

This attempt to destroy the registry may be because this compression software will open many file formats. Some file formats have no opening method by default. Quick Press makes itself the default check-in method by modifying the registry. You can change the Quick Press settings. That's it, it's just the file association, just uncheck the ones you don't need.

6. How to recover from pop-up Windows registry failure?

1) Turn on the computer and press F8 without moving to select safe mode to enter the system, select Start/Run, enter msconfig and press Enter, open the system configuration utility, select Start, look inside to see if there is a "ScanRegistry" option, if there is, cancel the previous one Check the box and press OK to restart the computer (if you can enter the system in normal mode, follow the above method in normal mode. If there is no such option, see the method below).

2) If it still doesn’t work, it may be a memory problem. If so, please check it.

3) In addition, there may be a problem with the disk. Use the following method to repair it.

This is a disk problem. Please repair it (repair each disk or only repair C).

The system’s own disk repair method:

The specific steps are as follows: Select drive letter C in My Computer, right-click and select Properties. In the pop-up drive properties window, select "Tools → Start Checking" and select "Automatically Repair File System Errors" and "Scan and File System Errors". "Recover Bad Sectors", and then click Start. The scanning time will vary depending on the disk capacity and scanning options (after following the above method, a box will pop up, click Yes, automatically shut down and then start up to repair, Win7 Select the Schedule disk check button).

Bad sectors on the hard disk will cause the computer system files to be damaged or lost, and the computer will be unable to start or crash. Bad sectors on the hard disk can be repaired using NDD Disk Utility or Scandisk.

If the fault persists, please restore the system or reinstall it (if it still doesn’t work, format the hard drive, repartition it, and reinstall it. If that doesn’t work, replace the hard drive or do some maintenance).

7. The computer registry has been modified, how to restore it to default?

Operation steps

1. Export the registry value. Start-Run input: regedit, OK or press Enter, open the Registry Editor; in the Registry Editor window, open: HKEY_CURRENT_USER\ControlPanel\Keyboard, left-click Keyboard; before modifying the registry value, export the registry first value, click File-Export; in the export registry file window, click: Desktop, enter: keyboard.reg in the file name (N) column, and then click: Save;

2. Modify the registry value. After exporting and saving the registry value, you can modify the registry value. For example, to modify: Keyboard Delay, double-click: KeyboardDelay, change "1" to "0" in the numerical data column of the pop-up edit string window, and then click: OK to exit the Registry Editor.

3. Restore the registry value after modification. If the keyboard becomes uncomfortable to use after modification, restore the original registry value.

8. How to restore the registry?

1. On your computer desktop, double-click the relevant icon to open the home page of the computer settings.

2. After arriving at the local disk, choose to enter the Windows folder on the C drive.

3. At this time, jump to a new interface and choose to enter the System32 folder.

4. Find the RegBack folder in the config configuration folder. This is the backup folder of the registry.

5. You need to select all the files and click the copy command in the pop-up menu by right-clicking the mouse.

6. Return to the previous folder, paste all the files over and restart the computer to restore the registry.

9. Why does windows-registry failure recovery always occur after the computer is turned on? How to solve?

1) Turn on the computer and press F8 without moving to select safe mode to enter the system, select Start/Run, enter msconfig and press Enter, open the system configuration utility, select Start, look inside to see if there is a "ScanRegistry" option, if there is, cancel the previous one Check the box and press OK to restart the computer (if you can enter the system in normal mode, follow the above method in normal mode. If there is no such option, see the method below).

2) If it still doesn’t work, it may be a memory problem. If so, please check it.

3) In addition, there may be a problem with the disk. Use the following method to repair it. This is a disk problem. Please repair it (repair each disk or only C). The system's own disk repair method: The specific steps are as follows: Select the drive letter C in My Computer, right-click the mouse and select Properties. In the pop-up drive properties window, select "Tools → Start Checking" and select "Automatically Repair Files" System Error" and "Scan and recover bad sectors", and then click Start. The scan time will vary depending on the disk capacity and scan options (after following the above method, a box will pop up, click Yes, and it will automatically shut down After booting up to repair, Win78 selects the scheduled disk check button). Bad sectors on the hard disk will cause the computer system files to be damaged or lost, and the computer will be unable to start or crash. Bad sectors on the hard disk can be repaired using NDD Disk Utility or Scandisk. If the fault persists, please restore the system or reinstall it (if it still doesn't work, format the hard drive, repartition it, and reinstall it. If that doesn't work, replace the hard drive or do some maintenance).

10. Can the registry be repaired by restoring the computer to factory settings?

Resetting the computer to factory settings can repair the registry.

Because restoring factory settings will only restore the settings of the operating system and its accompanying software, but will not restore third-party software installed by the user and modifications to the registry.

The above is the detailed content of Registry failure always occurs when starting the computer?. For more information, please follow other related articles on the PHP Chinese website!