Computer blue screen code 0xc0000001?

Is encountering blue screen code 0xc0000001 a headache? don’t worry! PHP editor Yuzai has carefully prepared this guide for you. This guide will take an in-depth look at the 0xc0000001 blue screen error, its potential causes, and provide a detailed set of solutions. Are you still worried about the blue screen? Read on now to regain your computer stability!

1. Computer blue screen code 0xc0000001?

Solution

1. First, we restart the computer, press "shift+F8" during startup to enter the recovery interface and click "Troubleshooting".

2. Select the "Launch Settings" button on the page.

3. Then click the "Restart" button in the lower right corner.

4. After the computer restarts, enter the startup settings menu and select F4 to enter safe mode.

5. Then select "Settings" in the start menu, select "Apps and Features", uninstall recently installed software, and then restart the computer.

6. If the above method cannot solve the problem, we can reinstall the system with a USB flash drive to solve the problem.

2. Computer blue screen code 0x0000001e?

The blue screen code 0x0000001e indicates that a memory access error has occurred. Possible reasons include:

1. Memory module failure: There may be memory damage, or the installed memory module is incompatible, the frequency setting is incorrect, etc.

2. The device driver is outdated or damaged: The device driver is the main program that controls the communication between the device and the operating system. If the driver is outdated or damaged, it may cause system errors.

3. Hardware problems: There may be hardware failures, such as hard drive damage, motherboard problems, etc.

For this kind of problem, you can refer to the following troubleshooting steps:

1. Check the memory: You can run a memory detection tool, such as Windows Diagnostic Tool, to check whether there is a memory fault. And you can try to replace the memory module, adjust the memory frequency, etc.

2. Update or uninstall the driver: You can try to update the device driver, or uninstall and then reinstall the driver to ensure that the device driver is compatible with the system version.

3. Check hardware: You can check and replace damaged hardware, such as hard drives, motherboards, etc.

It should be noted that if you are not sure how to solve the blue screen problem on your computer, it is recommended to contact professionals for help to avoid the impact of possible risks.

3. Computer error code 0xc0000001?

Error code 0xc0000001 is not necessarily caused by hardware damage, but this possibility is not ruled out. This code is not common. Many users suspect that it is caused by hard drive failure, boot program error, memory incompatibility, MBR file damage, etc., but In fact, this is not the case. It is caused by the existence of a hidden partition in the system. Use the DiskGenius tool to clear the hidden partition, or completely format the hard disk and then redo the system to recover.

4. Win100xc0000001 computer error code?

Error code 0xc0000001 means that there may be some issues with the boot device, or some boot files are corrupted. This can also happen if there are some problems with your computer's boot sector. Corrupted system files or corrupted memory are common causes, and recent changes in hardware and software may also be one of the causes.

Solution 1: Uninstall the potentially problematic software in safe mode

①, restart the computer, hold down the key during startup, and open the recovery interface.

②. Select in the interface.

③. After the computer restarts, enter the startup settings menu and select safe mode to start.

④. Select in the start menu, select, uninstall the recently installed software, and then restart the computer. If the fault is caused by newly installed software, this method can solve it.

Solution 2: Perform startup repair through Windows recovery environment

①. First, use another computer that starts normally to download the Windows 10 Media Creation tool from the official website.

Download address: https://www.microsoft.com/en-gb/software-download/windows10

②. After the download is completed, double-click to open the tool, agree to the usage agreement, and select.

③. Select the media U disk to be used (make sure the C disk space is 8G, otherwise an error will be prompted.)

④. Wait for the Windows 10 installation file to download. After the download is completed, the installation content will be written to the U disk. .

⑤. Connect the U disk to the target computer and boot from the U disk (change the boot sequence in the BIOS settings to USB disk or CD-ROM Drive).

BIOS modification boot sequence

⑥. Successfully boot from the USB disk and enter the Windows 10 installation interface, click on the lower left corner.

⑦. After entering Windows RE, select and follow the instructions on the screen to complete the startup repair.

5 Komputer selalunya skrin biru, kod skrin biru: 0x0000001a?

1. Terdapat masalah skrin biru pada komputer STOP ialah: 0x0000001a2 Gunakan alat pertanyaan skrin biru dan masukkan kod pendek skrin biru: 1a : 0x0000001a Sebab: Cakera atau cakera yang ditentukan tidak boleh diakses . 3. Tetapi sebab ini hanyalah peringatan umum dan tidak dapat ditentukan dengan lebih tepat. Langkah-langkah yang perlu diambil ialah kaedah seperti memasuki mod selamat. 4. Nama fail ntoskrnl.exe yang salah dipaparkan. 5. Fail ntoskrnl.exe ialah fail pemacu untuk kad N (kad grafik). Putar balik pemandu dulu. 6. Cari pemacu kad grafik yang sepadan dan kemas kini (CD pemacu yang disertakan dengan serangan adalah padanan terbaik). 7. Semasa operasi, masukkan: sysdm.cpl → OK, atau gunakan kekunci pintasan: windows+pausebreak untuk membuka sifat sistem. 8. Lanjutan → Permulaan dan Pemulihan 9. Pastikan anda menyemak Tulis peristiwa ke log sistem. 10. Selepas skrin biru, salin laluan: %SystemRoot%MEMORY.DMP. 11. Kemudian, tampal laluan semasa operasi: %SystemRoot%MEMORY.DMP dan buka fail

6. Kod ralat skrin biru komputer 0xc0000001?

Mulakan semula komputer dan tahan kekunci semasa permulaan untuk membuka antara muka pemulihan.

Pilih pada gilirannya pada antara muka.

Selepas komputer dimulakan semula, masukkan menu tetapan permulaan dan pilih mod selamat untuk bermula.

Pilih dalam menu mula, pilih, nyahpasang perisian yang baru dipasang, dan kemudian mulakan semula komputer. Jika kerosakan disebabkan oleh perisian yang baru dipasang, kaedah ini boleh menyelesaikannya.

7 Komputer Xiaomi, kod ralat 0xc0000001?

Jika kod ralat muncul, mungkin sistem telah ranap dan anda perlu memasang semula sistem

8 kod ralat komputer Dell 0xc0000001?

Perlu ditetapkan kepada mod keserasian dalam bios.

Kaedah tetapan ialah:

1 Pertama, klik kanan program yang tidak dapat dijalankan, dan kemudian pilih "Properties".

2. Tukar ke bar pilihan keserasian dan pilih "Jalankan Penyelesai Masalah Keserasian".

3 Kemudian tunggu sistem menganalisis masalah.

4 Selepas analisis, klik "Cuba tetapan yang disyorkan".

5 Sistem akan memberi anda mod keserasian yang disyorkan. Klik "Program Ujian" untuk melihat jika tersedia, klik "Seterusnya".

6 Pilih "Ya, simpan tetapan ini untuk program ini".

9. Kod ralat permulaan komputer 0xc0000001?

Kod ralat: 0xc000001 menunjukkan bahawa mungkin terdapat beberapa masalah dengan peranti but, atau beberapa fail but mungkin rosak. Ini juga boleh berlaku jika terdapat beberapa isu dengan kawasan kipas but komputer. Fail sistem yang rosak atau memori yang rosak adalah punca biasa, begitu juga dengan perubahan terkini dalam perkakasan dan perisian.

10. Bagaimana untuk menyelesaikan kod skrin biru 0000001?

Penyelesaian:

1.

Tekan kekunci F8 semasa but, pergi ke mod selamat untuk menyahpasang pemacu dan perisian yang bermasalah.

2.

Gunakan 360 ​​Security Guard untuk kerap membersihkan sampah dan memeriksa virus.

3.

Buka bekas komputer, bersihkan sedikit habuk dan semak sambungan antara perkakasan.

4.

Gunakan Xiaoyu System Reinstallation Master untuk membantu kami memasang semula sistem untuk menyelesaikan masalah kod skrin biru 0x0000001 Memasang semula sistem boleh menyelesaikan kebanyakan masalah skrin biru.

The above is the detailed content of Computer blue screen code 0xc0000001?. For more information, please follow other related articles on the PHP Chinese website!