Trip computer failure?

Have you ever encountered the trouble of trip computer failure? As the control center of modern cars, the trip computer will greatly affect the driving experience and safety once it fails. PHP editor Xigua will explain in detail the various malfunctions that may occur on the driving computer and provide corresponding solutions. Come read this article to find out effective ways to solve your driving computer failure, avoid safety hazards, and ensure driving safety!

1. Trip computer failure?

The following is a detailed introduction to the symptoms of trip computer failure:

, 1. The engine fault light is always on: If there is no fault after checking other engine hardware, but the fault light is still on, then the computer board should be checked.

, 2. The vehicle is difficult to start: Since the vehicle requires the trip computer to increase the amount of fuel injection when starting, if the trip computer is damaged, the concentration of the combustible mixture will be relatively low, making it difficult to start the vehicle.

, 3. Internal program confusion: The vehicle's fuel injection volume, ignition timing, gearbox shifting logic, etc. will be affected. If the vehicle becomes very poor when driving or even fails to ignite, you can try to check whether the computer board is faulty. No damage occurred.

2. BMW 3 Series trip computer failure?

Common reasons include the following:

1. The central control display screen was scratched by sharp objects, causing damage.

2. There is a big deviation in the screen recognition system of the navigator.

3. The machine’s CPU cannot handle the calculation.

4. There is a compatibility problem, or the signal may be poor.

5. If it is summer, hot weather is also one of the reasons for the slow response of the central control display.

3. Geely Borui driving computer failure?

Go to the 4S store and ask. If there is an auto parts store nearby, go to the auto parts store. You need to use a special instrument to read the fault code

4. Tailing electric vehicle trip computer failure?

The trip computer of Tailing electric vehicles integrates three functions: intelligent detection, voice prompts, and fault repair. When a Tailing electric vehicle fails, for example, it cannot move, the brake lever does not return to its position, and the vehicle cannot move, etc. At this time, press the trip computer button and the system will automatically detect the vehicle.

It can detect faults as large as the motor Hall circuit or as small as the brake circuit. After the system detects the cause of the fault, it will notify the owner through the voice system and automatically repair it. At this time, you can continue riding to the specialty store for maintenance.

5. Are all Song Max trip computer fault lights on?

1. Parking system fault warning light

Possible situations when the fault light comes on: low brake fluid level, brake system failure, parking brake is on. If the parking brake is not applied, stop the vehicle immediately and contact a BYD authorized service store.

2. Electronic parking status indicator light (when installed)

The indicator light lights up to indicate that electronic parking has been activated. The indicator light flashes to indicate that the electronic parking is in the process of being pulled up (flashes about 6 times) or the electronic parking fails (flashes constantly). When the electronic parking fails, it is recommended to stop the vehicle immediately and contact a BYD authorized service store.

3. Driver's seat belt indicator light

The driver should fasten his seat belt.

4. Charging system warning light

When the indicator light comes on, there is a fault with the charging system. Stop the car immediately and it is recommended to contact a BYD authorized service store.

5. Low oil pressure warning light

When the light comes on, stop the vehicle immediately and contact a BYD authorized service store.

6. Engine failure warning light

When the indicator light comes on, it is recommended to send the vehicle to a BYD authorized service store for inspection.

7. Smart key system warning light

Check whether the key is in the car or whether the battery is low.

8.ABS fault warning light

When the indicator light comes on, it is recommended to send the vehicle to a BYD authorized service store for inspection. If the parking system fault warning light is also on, stop the vehicle immediately and contact a BYD authorized service store.

6. The Cruze’s trip computer is faulty. How much does it cost to repair it?

It depends on whether it is just a system problem or if the computer board is broken. The system problem should be within 300. If the computer version is broken, it is estimated to be 2000 to 3000.

7. It’s a tragedy. After applying the film, the trip computer fault light is all on. What’s going on?

It may be that you were not careful when applying the film and water seeped into the trip computer.

When applying a vehicle film, you need to spray water on the car glass in order to clean the glass and to easily adjust the position of the film.

In addition, the film will not affect the vehicle.

8. If the turn signal of Trumpchi GS4 flashes too fast, is it a trip computer failure?

No.

The reasons why the turn signal flashes too fast are as follows:

1. The turn signal is burned out: general turn signals such as turn signals, front fender lights, turning auxiliary lights, rear turn signals, etc., any of them A burned out light bulb may cause the flashing frequency to be too fast when turning.

2. Poor contact of the turn signal: such as loose bulb, poor plug connection, etc.

3. Inconsistent power or model of the steering bulb: This is caused by some car owners not using bulbs of the same specification and model when replacing the steering bulb, or the power is too large or too small.

4. Bulb control relay failure: It may be caused by the circuit relay controlling the steering lighting system.

9. Is the driving computer mainboard module faulty?

　 There are many reasons for host failure. The most direct way is to pull out the cards one by one when the computer is turned off. After each card is pulled out, turn on the machine to observe the operating status. If the computer fails after pulling out a certain card, If the operation is normal, then the cause of the fault is that the plug-in card is faulty or there is a problem with the corresponding I/O bus slot and load circuit.

10. Is it a malfunction that the trip computer displays the refueling icon?

When the fuel gauge icon on the car lights up, it indicates that the fuel tank is almost empty and it is time to refuel in a short time. From the time the light turns on, the fuel in the tank can still travel about 20 kilometers.

The above is the detailed content of Trip computer failure?. For more information, please follow other related articles on the PHP Chinese website!