What is the reason why the computer cannot run Windows98?

There may be many reasons why your computer cannot run Windows 98. PHP editor Xigua has specially sorted out the common factors that cause this problem to help you diagnose and solve the problem. In this article, we'll take a closer look at potential causes that may be affecting the normal operation of your computer and provide effective troubleshooting steps and solutions. Read on to learn more about the causes and find the best fix for your system.

At this time, we can handle it in two situations, one is that it can boot into safe mode normally, and the other is that it cannot even enter safe mode. 1. If you can enter safe mode If you can enter safe mode, the problem is generally not big. It can be handled in two situations: 1. If the new device cannot start normally after installing it, we can press the F5 key during startup to enter safe mode, double-click the system item in the control panel, select the "Device Manager" tab in the system properties, and select all listed Check the device list to see if there is any conflicting device. Generally, there is an exclamation mark in front of the conflicting device. If so, you can select the device and then select "Properties" to view the current status of the selected device. If the interrupt conflict between this device and other devices is listed under the "Resources" tab, you can cancel the "Automatically set" check box, then click the "Change Settings" button and select an unused interrupt number. After making the changes, restart the system to see if it can start normally. If that doesn't work and there is still an interruption conflict, you can select the "General" tab in the device properties, and in the device usage group box, select the "Disable in this hardware profile" check box, which means that in Windows 98 Do not use this device. If it can start normally, it proves that there may be a problem with the driver of this hardware. You can delete it in the device manager and reinstall the driver, which can generally solve such problems. 2. The fault is caused by a certain software automatically starting at startup. You can select the "Start/Run" menu in sequence, enter "msconfig", start the system configuration utility, select the "Startup" tab, and list the items that will automatically start when the system starts in the window. For all applications, remove the small check mark in front of the problematic program to prevent the program from starting. Restarting the system after removing it can solve such problems. By the way, if you find some auto-start application names that come from nowhere, be wary. Especially for friends who are online, it may be a backdoor or remote control program. You must disable its self-starting, then find this file and delete it. If it prompts that some .vxd, .386 and other files in the system.ini file are missing when the system starts, you can copy the corresponding files to the corresponding location on another computer. If that still doesn't work, you can also back up your System.ini file in the Windows 98 installation directory, then use a text editor to open the system.ini file and find the corresponding .vxd or .386 line. Delete the line. If the modification is incorrect, use backup to restore it. 2. If you cannot enter safe mode If you cannot enter safe mode, generally speaking, a serious error has occurred in Windows 98. At this time, you can try the following methods. First, use anti-virus software to check for viruses to see if they are caused by viruses. Press the F8 key during startup. Generally, 6 options will appear (if DOS6.22 is installed, 7 options will appear). Select the 4th item step-by-stepconfirmation to enter the single-step running mode, and then Process the system registry [Enter= Y, Esc=N]? option, if you press Y and the computer freezes, you can restart and press the F8 key. After selecting item 4, only press the item Device=c:\windows\himem.sys Y, press N for the rest, enter Scanreg/fix at the DOS prompt to repair the registry or scanreg/restore to restore the registry automatically backed up by the previous system, and then restart. When Createastartuplogfile(BOOTTLOG.TXT)[Enter=Y,Esc=N] appears, select Y to create the Bootlog.txt file. You can check the loading of each system file during the startup process. If the computer crashes when loading a certain .vxd file, you can copy the .vxd file to another computer. If that still doesn't work, press F8 during startup and select the 5th item Commandpromptonly, then use Edit to open boottlog.txt. In this file, if [XXXXXXXX]LoadVxd=vmouse means loading the vxd file at the memory address XXXXXXXX (XXXXXXXX is an 8-digit hexadecimal number indicating the memory address), [XXXXXXXX]LoadSuccess=vmouse means the load is successful. If it displays Loadfailed or DEVICEINITFILED, then you must pay attention to what file is wrong. Generally speaking, if it is a vxd file, you can copy the file to another computer. If it is DEVICEINITFAILED, you can copy the corresponding file in the driver again. That’s it. A special case of not being able to enter safe mode is that if it appears right after startup, it is now safe to shut down the computer. This is usually because the vmm32.vxd in the System directory of Windows is damaged. You can copy it to another computer. A blue screen appears upon startup and VFATDevcieInitializationFaild is displayed, indicating that there is a problem with dblbuff.sys and ifshlp.sys in the Windows directory. Sometimes you use the system disk to start and then use SYSC: After transferring the system, it is possible that dblbuff.systt and ifshlp.sys cannot be loaded at startup. Two files, then you need to manually add the following to the config.sys file: device=c:\windows\dblbuff.sys and devicehigh=c:\windows\ifshlp.sys. If these two files are damaged , you can copy it to another computer.

The above is the detailed content of What is the reason why the computer cannot run Windows98?. For more information, please follow other related articles on the PHP Chinese website!