Assembling computer performance settings? How to set up the assembled computer for the first time?

For a freshly built computer, performance settings can often be overwhelming. PHP editor Zimo brings you a detailed explanation. Starting from entering the BIOS interface for the first time, he guides users step by step to perform performance settings, including adjusting memory frequency, graphics card fan, power mode, etc. By following these settings, users can get the most out of their computer and get the best experience.

Assemble computer performance settings?

1. In the Windows 10 system interface, click "System and Security".

2. Select the big icon-----Power Options

3. Click "Create Power Plan" on the left.

4. Find the high-performance mode in the hidden plan. This mode is the hardware performance maximizing operating mode set by the win7 system for us. It consumes more power. You can choose this mode to assemble it

How to set up the computer when entering it for the first time?

The setup steps when a computer enters the system for the first time will vary slightly depending on the computer brand, operating system and BIOS settings. Here are some common steps:

1. Start the computer, and then wait until the computer boots up until the brand logo or operating system startup interface appears on the screen.

2. Follow the on-screen prompts to select the corresponding boot device. If it is a UEFI boot, select the UEFI option; if it is a BIOS boot, select the BIOS option.

3. In the boot device selection menu, select the "Boot" or "Startup" option to enter the startup settings page.

4. In the boot settings page, find the "Boot Order" or "Secure Boot" option and set it to Disabled (off), so that the computer can start from the first device in the UEFI boot list start up.

5. In the startup settings page, find the "Launch CSM" or "UEFI/Legacy Boot" option and set it to Enabled, so that the computer can support booting from the traditional BIOS.

6. In the startup settings page, find the "Secure Boot" or "TPM" option and set it to Disabled, so that the computer can support booting from UEFI.

7. Save settings and exit. In some BIOS, you can press F10 to save and exit the settings; in some UEFI-booted computers, you can press F12 or other shortcut keys to save and exit the settings.

After completing the above settings, the computer will restart and start from the first boot device.

Please note that these are just some common steps, and different computer brands and operating systems may have different settings. If you encounter problems, it is recommended to check the official documentation for your computer brand and operating system, or contact the computer manufacturer's technical support.

What are the BIOS settings after computer assembly?

In bios, just set the hard disk as the first startup item.

How to set up the startup of a newly assembled computer?

After assembling the computer by yourself, don’t rush to turn it on. Check whether the hardware is plugged in securely, and then plug it in and try to turn it on. Since the newly installed computer does not have a system, after turning it on, go to the bios to check various motherboard settings and install it. Before the win system, if you install the system from a USB flash drive, first set the first boot item of the bios to USB boot. After restarting, you can insert the USB flash drive to install the system.

How to make basic settings and BIOS settings for a newly assembled computer?

Steps:

1. Assemble a new computer, turn it on and click the Delete key;

2. Enter the motherboard BIOS and enable AHCI of the SATA interface;

3 , set the optical drive startup or U disk startup, click F10 to save the settings;

4. Restart, use the CD system disk or U disk startup disk to install the WIN7 Ultimate 64-bit SP1 system;

5. After the system is installed, use the CD that comes with the motherboard to install the relevant hardware drivers and motherboard-specific software. If you have an independent graphics card, use the CD that comes with the graphics card to install the graphics card driver;

6. Plug in the network cable, connect to the network correctly, and you can access the Internet. Finally, download and install 360 Security Guard, run it for immediate physical examination, download and install system patches and optimize them.

What settings are needed after assembling the computer and turning it on?

After assembling the computer, here are some common settings and checklists:

1. BIOS settings: After booting, press the corresponding button (usually DEL, F2 or F10) to enter the BIOS Set interface. In the BIOS, you can make various settings, including boot sequence, date and time, hardware configuration, and more. Make sure to check and adjust these settings to suit your needs.

2. Operating system installation: If your computer does not have an operating system installed, you need to install the required operating system through boot media (such as a USB installation disk). Follow the on-screen instructions to install, selecting the appropriate options as needed.

3. Driver installation: After installing the operating system, you need to install the drivers for the relevant hardware to ensure that they can operate properly. This includes drivers for motherboards, graphics cards, sound cards, network adapters, and more. Usually, you can download the latest drivers from the official website of each hardware manufacturer and follow the instructions to install them.

4. Update the operating system and drivers: After installing the driver, it is recommended to update the operating system and drivers in time to obtain the latest feature enhancements and fixes to improve system stability and security.

5. Set up a network connection: Set up a wired or wireless network connection according to your needs and network environment. Make sure you are connected to the correct network and make the appropriate settings, such as IP address, subnet mask, gateway, etc.

6. Hardware check: Check that all hardware components are properly connected and working properly. Make sure that the power supply, memory module, hard drive, graphics card, etc. are all firmly connected and not loose or damaged.

7. Security settings: In order to protect the security of your computer and data, it is recommended to set up passwords, firewalls, security software and other security measures. This can help prevent unauthorized access and malware attacks.

8. Testing and optimization: Finally, perform some testing and optimization to ensure the normal operation and performance of the system. You can run some stability testing tools such as Memtest86+ to detect whether there are memory problems. You can also perform performance optimization as needed, such as adjusting display settings, optimizing startup items, etc.

How to set up the DIY computer after it is assembled and turned on?

Method 1

1

Method 1

Step/Method 1

The desktop computer must be connected to the display interface correctly

For desktop computers, in addition to confirming that the power cord is properly connected, it is also necessary to confirm whether the connection position of the monitor signal cable and the host graphics card is correct.

Step/Method 2

Select "China" and click "Yes"

Step/Method 3

Select "Microsoft Pinyin" and click "Yes"

Step/Method 4

Click "Skip"

Step/Method 5

This step is the most critical step for the first system configuration, please do not This step connects to the network. It is recommended to choose "Skip"

Step/Method Six

Click "Accept"

Step/Method Seven

Set user name , click Next

Step/Method 8

Set the login password, click Next (you can also click Next without setting a password)

Step/Method 9

Click "Yes"

Step/Method Ten

Default settings, click "Accept"

Step/Method Eleven

Here You don’t have to fill it in, just click “Next.”

Steps/Methods Twelve After assembly, how to set up the BIOS?

Steps:

1. Assemble a new computer, turn it on and click the Delete key;

2. Enter the motherboard BIOS and enable AHCI of the SATA interface;

3 , set the optical drive startup or U disk startup, click F10 to save the settings;

4. Restart, use the CD system disk or U disk startup disk to install the WIN7 Ultimate 64-bit SP1 system;

5. After the system is installed, use the CD that comes with the motherboard to install the relevant hardware drivers and motherboard-specific software. If you have an independent graphics card, use the CD that comes with the graphics card to install the graphics card driver;

6. Plug in the network cable, connect to the network correctly, and you can access the Internet. Finally, download and install 360 Security Guard, run it for immediate physical examination, download and install system patches and optimize them.

How much does it cost to assemble a computer?

Graphics card rtx2060 2500 yuan (supports ray tracing)

cpu R5 3600 1400 yuan

Motherboard: B450 600 yuan

m.2 Solid state drive 500G 600 Yuan

+ 4T mechanical hard drive 600 yuan

Main case with fan + power supply 600w 500 yuan

8G two memory sticks, 500 yuan

Keyboard and mouse 100 yuan

List of computers to assemble?

Assembling a computer does require a checklist, because when we assemble the computer, after determining the configuration and operation requirements of the computer, we can purchase some suitable motherboards online, and then determine the power supply, graphics card and other configurations based on the motherboard. If you ask, just make a list and ask the computer factory or dealer to buy directly

The above is the detailed content of Assembling computer performance settings? How to set up the assembled computer for the first time?. For more information, please follow other related articles on the PHP Chinese website!