Asus b560m-plus heavy gunner motherboard power connection?

Have you encountered problems with the power supply wiring of the ASUS B560M-Plus Heavy Gunner motherboard when assembling your computer? PHP editor Xigua brings you a detailed guide to power supply wiring for the ASUS B560M-Plus Heavy Gunner motherboard. This article will guide you step-by-step on how to connect power to your motherboard, including the ATX 24-pin main power connector, the EPS 8-pin/4-pin processor power connector, and the optional 6-pin/8-pin PCIe graphics card power connector. By carefully reading the following content, you will be able to easily complete the power wiring of the motherboard and provide stable and reliable power supply to your computer system.

Asus b560m-plus heavy gunner motherboard power wiring?

Find the widest and longest combination cable on the power supply (usually 24 holes), which corresponds to the 24-pin slot on the motherboard. There will be a buckle on the line. Align it with the buckle on the slot and plug it in directly. That's it, continue to find the 4-hole CPU power supply cable on the motherboard (a combination of 2 yellow and 2 black wires), and the 4-pin slot on the motherboard is next to the CPU base. Also align it with the buckle and plug it in directly.

I want to change the CPU and motherboard. Do I need to change the power supply?

Your motherboard only supports 4th generation CPU. If you want to change the CPU, the motherboard must also be changed.

Your motherboard supports DDR3 memory. If you change the CPU and motherboard, the memory must also be changed.

Because the sound card and network card are integrated on the motherboard, it means that if you change the motherboard The sound card and network card have also been changed.

Your hard drive can still be used, but it is best to add a solid state drive. The computer can speed up a lot.

The source is 430W. I don’t know if it is enough. Depending on the power consumption of the hardware after you replace it, 80% of it will have to be repaid

Since you have changed the CPU, motherboard, memory, graphics card, solid state, power supply, etc., then changing the chassis will not cost much more

The monitor can still be used, but it will be more enjoyable to play games with a better one

How to connect the motherboard powled?

Operation method

01

Power SW represents the power switch; RESET SW represents the computer restart key. These two sockets are not divided into positive and negative poles. Yes, as long as you find the right pins, the contact will complete the opening or restarting action.

02

H.D.D LED represents the hard disk light; POWER LED represents the power indicator light. These two sockets are divided into positive and negative poles. If you plug them in incorrectly, the corresponding indicator light will not light up.

03

Due to different motherboard manufacturers or different production batches, their corresponding socket positions on the motherboard are also different. At the same time, due to the limited space on the motherboard, the logo will not be spelled out in full, but will be marked in abbreviated form.

04

are generally represented by their abbreviations on computer motherboards. For example, PWRLED represents the power light line interface; HDDLED represents the hard disk light line interface; PWRSW represents the switch line interface; RST SW Indicates restarting the line interface. The letters written on the logo are generally facing outward.

How to install the motherboard connector and host plug?

The plugs on the computer motherboard are designed to be fool-proof, which means that if they are plugged in incorrectly or backwards, they cannot be plugged in. Just take the plug and find the corresponding interface on the computer motherboard. How to connect the desktop computer host’s boot cable:

1. Put all the cables together. According to the above labels, first clarify the definition of each cable: a. Power switch: POWER SW, maybe Names: POWER, POWER SWITCH, ON/OFF, POWER SETUP, PWR, etc. Function definition: reset button on the front of the chassis. b. Reset/restart switch: RESETSW, possible names: RESET, Reset Swicth, Reset Setup, RST, etc. Function definition: power-on button on the front of the chassis. c. Power indicator: +/- Possible names: POWER LED, PLED, PWRLED, SYS LED, etc. d. Hard drive status indicator: HDD LED, Possible names: HD LED e. Built-in small speaker (or alarm) : SPEAKER, possible name: SPK, function definition: motherboard abnormality alarm. f. Audio connection cable: AUDIO, possible name: FP AUDIO, function definition: chassis front audio, generally a whole. g. The USB connection to the front interface is generally a whole.

2. Find the location of each pin on the motherboard. 4. After the inspection is completed, press the power button on the chassis and check whether all the indicator lights are normal. 5. After the indicator light is normal, use a USB flash drive and headphones to check whether the front USB and front audio are normal. 6. Check that everything is normal and then close the chassis. The cable connection work is completed. Tip: Please perform all operations after the power is turned off.

How to connect the power cord of b550 motherboard?

POWER is connected to the power on/off button, RESET is connected to the restart button. HDD-LED is connected to the hard disk working indicator light, POWERLED is connected to the power supply working indicator light, and SPEAKER is connected to the self-test beep. Under normal circumstances, it will be marked on the motherboard. Just look for it carefully and you'll be fine. It's basically the same as online English, some are abbreviations, and those few cables generally won't cause too much harm to the computer, so you can try it boldly.

How to connect the power supply to the motherboard inside the computer case?

1. The motherboard generally has four sets of switch indicator lines and POWER SW power switch. POWER LED power indicator light. RESET SW reset switch. H.D.D LED keyboard status indicator. Pay attention to the positive + negative poles when connecting. Usually colored lines such as red, green, yellow, etc. represent the positive pole, and white and black represent the negative pole. Pay attention to the distinction. Please refer to the manual for connecting the signal cable to the motherboard. Different motherboards have different connection methods.

1. Commonly used 9-pin boot cable connection method 2. Commonly used 20-pin boot cable connection method Selection principles The computer motherboard has a significant impact on the performance of the computer. Some people once compared the motherboard to the foundation of a building, and its quality determines whether the building is strong and durable; others vividly compared the motherboard to a viaduct, and its quality is related to the smoothness and speed of traffic. 1. Stable work and good compatibility.

2. Complete functions and strong scalability.

3. Easy to use, you can adjust as many parameters as possible in the BIOS.

4. The manufacturer has a website that is updated in a timely manner and has rich content, making maintenance convenient and quick.

5. The price is relatively cheap, that is, it is cost-effective.

The above is the detailed content of Asus b560m-plus heavy gunner motherboard power connection?. For more information, please follow other related articles on the PHP Chinese website!