Computer button sewing machine has a black screen?

The black screen of the computer button sewing machine may be caused by a variety of reasons, such as: hardware failure, software failure or system setting issues. PHP editor Xinyi will introduce in detail the reasons and solutions for the black screen of computer button sewing machines to help everyone quickly diagnose and solve the problem. The following content will delve into common causes of black screens and provide step-by-step troubleshooting guides so that you can solve the problem step by step.

Analysis: A blue screen or black screen that prevents normal entry into the system is usually caused by software or hardware failure. The reasons are many and complex. It may be that the system file is damaged, or It may be a virus infection, there may be too many background self-starting programs or multiple security software installations causing the system to freeze, or it may be a problem with the memory, hard disk or motherboard. The error codes generally do not have clear diagnostic significance. Recommendation: Check one by one according to the principle of starting from easy to difficult, software first and then hardware. It is recommended to reinstall the system. This is the simplest and fastest method. If the system reinstallation is successful, it can also eliminate the possibility of hardware problems. If the problem still cannot be solved after completing steps 1 to 4, you need to replace the hardware such as memory, hard disk, motherboard, graphics card, etc. one by one for testing to determine the source of the fault. 1. Restart the computer. If you can enter the system normally, it means that the last abnormality was just an occasional program or system operation error and does not matter. 2. If you frequently cannot enter the system normally, press F8 immediately after turning on the computer to see if you can enter the safe mode or the last correct configuration mode. If you can, enter and exit, and then restart and you should be able to enter the normal mode. If you have security software, you can use 360 ​​Security Guard plus 360 Antivirus or Kingsoft Antivirus and other security software in safe mode to scan and kill all Trojans and viruses. 3. If not, press F11 after restarting to see if there is one-click GHOST, and if so, restore with one click (one-click backup was required before). 4. If there is no one-click restore, use the system USB flash drive to reinstall the system. After inserting the USB disk, turn on the computer and press the DEL key (usually F2 on laptops or according to the prompts on the bottom line of the screen) to enter CMOS, enter the BOOT tab and set the USB disk as the first boot item. Restart and enter the USB boot menu, select Clone Installation, and then follow the prompts. The steps to make a system U disk and reinstall the system are: 1). Make a boot U disk: Go to a physical store to buy a 4-8G U disk (you can ask your boss to help make it into a system U disk to omit the following steps), go online Search and download a bootable USB flash drive creation tool such as Laomaotao or Chinese cabbage. Insert the USB flash drive into the computer and run this software to create a bootable USB flash drive. 2). Copy system files: Go online to the System Home website to download the GHO file of operating systems such as WINXP or WIN7, and copy it to a U disk or the U disk folder specified by the startup tool. 3).Set the USB disk as the first boot disk: Press the DEL key (usually F2 or other for notebooks) when turning on the computer to enter the BIOS setting interface, enter the BOOT tab to set the USB disk as the first boot item (Note: Some computers need to do this at this time Insert the USB flash drive for recognition before setting). 4). U disk boot and reinstall the system: Insert the U disk to start the computer, enter the U disk boot interface and follow the prompts to use the downloaded GHO file to clone and install. 5. If you have a system CD (you can go to a computer store to buy it if you don’t have one), insert the system CD into the CD-ROM drive. After turning on the computer, press the DEL key (usually F2 or according to the prompt characters on the bottom line of the screen) to enter CMOS, and in the BOOT tab Set the optical drive (CD-ROM or DVD-ROM) as the first startup item. Restart and enter the CD boot menu, select to install the system to Area C, and then follow the prompts. Bian Toutiao Lai

The above is the detailed content of Computer button sewing machine has a black screen?. For more information, please follow other related articles on the PHP Chinese website!