How to build a computer?

Building a computer is an exciting project, but it can be intimidating for newbies. PHP editor Xiaoxin will guide you through the complete process of computer assembly in this article. From selecting components to assembling and installing the operating system, we'll cover every step so you can build your own computer with confidence. Read on to learn more about this fascinating world.

#1. The installation of the chassis mainly involves unpacking the chassis and installing the power supply in the chassis.

2. To install the CPU, insert the required CPU into the motherboard processor socket, and apply thermal grease to install the cooling fan.

3. To install the memory module, insert the memory module into the motherboard memory slot. Sometimes multiple modules are needed.

4. To install the graphics card, select the appropriate slot according to the graphics card bus.

5. Installation of sound card. Most of the mainstream sound cards in the market are sound cards with PCI slots (some motherboards are compatible with graphics cards and sound cards. This kind of integrated card has poor function. You can choose whether to install the above hardware according to your own needs) .

6. Installation of the motherboard, install and fix the motherboard inside the chassis (Note: In order to facilitate the installation of hardware on the motherboard, such as CPU, graphics card, memory module, please install the hardware on the motherboard in advance and then install the motherboard into the chassis).

7. Driver installation, mainly for hard disk, optical drive and floppy drive.

8. The connection between the chassis and the motherboard, that is, various indicator lights and power switch wires. The connection of PC speakers, as well as the connection of power cables and data cables of hard disk, optical drive and floppy drive.

9. Close the chassis cover (Theoretically, after installing the host, you can close the chassis cover, but in order to check for future problems, it is best not to cover it first, and wait until the system is installed. cover again).

10. Install the input device and connect the keyboard and mouse to the host. The mainstream keyboard and mouse interfaces are USB interfaces.

11. The installation of the output device, that is, the installation of the monitor, just connect it to the corresponding interface and power cord.

12. Recheck each wiring and prepare for testing.

13. Power on the machine. If the monitor can display normally, it means that the initial installation has been correct. At this time, enter the BIOS for initial system settings.

14. For hard disk partitioning, you can use the system disk’s own format partitioning or special software.

15. Install the operating system, WindowsXP (Microsoft has stopped the service, it is recommended to choose a newer operating system), vista, Win7, Win8 system. If you need to carry out embedded development and design, install Linux and other systems.

16. After installing the operating system, install drivers, such as graphics card, sound card, network card and other drivers.

17. Roast the machine for 72 hours. If there is a hardware problem, it will usually be discovered during the 72-hour roasting process.

Extended information

1. The assembly machine can be freely matched and can be matched according to user requirements.

2. The DIY accessories market is being eliminated at a relatively fast pace, and it is difficult for branded machines to keep up with its update speed. For example, some accessories that have been eliminated in the spare parts market still appear on branded machines.

3. Price advantage. There are few links in the computer parts market and the profits are low. There is a certain gap between the price and branded machines. Branded machines have many circulation links and the profits are higher in comparison, so there is no price advantage. Brand-name machines tend to reduce the cost of motherboards and graphics cards. Some people who are ignorant about computers mainly look at the size of the hard drive and the level of the CPU, but ignore the importance of the motherboard and graphics card.

4. In terms of after-sales service, the assembly machine is the same as the brand machine. The main parts are provided with a three-year warranty, and the warranty period of some accessories even exceeds that of the brand machine. This is fatal for the brand machine.

Reference source:

Reference source:

The above is the detailed content of How to build a computer?. For more information, please follow other related articles on the PHP Chinese website!