Chassis assembly steps? How to assemble the chassis?

How to assemble the chassis? Case assembly is a critical step in computer assembly, and the correct sequence and method need to be followed carefully. PHP editor Xinyi will introduce you to the various steps of chassis assembly in detail, including installing the motherboard, CPU, memory, graphics card, hard drive and power supply, and provide clear illustrations and guidance. By reading this article, you will master the skills of chassis assembly and ensure the normal and stable operation of your computer system.

Chassis assembly steps?

1. Step 1: Tools and components. First of all, you need to prepare the corresponding tools, such as screwdrivers and screwdrivers. Usually, simple tools are given when you purchase the case. At the same time, you must also prepare various components of the host such as motherboard, graphics card, memory stick, CPU, power supply, chassis, etc.

2. Step 2: Install the CPU. The installation of the host starts with the CPU. Unpack the motherboard and CPU packaging boxes, take out the motherboard, find the location of its CPU interface, press the lever downward to open it, then take out the CPU and align it for installation. Be gentle. Be slow and careful to avoid bending the CPU pins.

3. Step 3: Install the cooling fan. If it is a boxed CPU, it will come with a cooling fan, which can be installed on the motherboard together with the CPU. If you purchase a separate cooling fan yourself, you need to apply silicone grease to the CPU before installing the fan.

4. Step 4: Install the power supply. Put the motherboard with the CPU installed next to it, first disassemble the case and then install the power supply. Here you need to use a screwdriver to tighten the screws to fix the power supply in the case, and remove some cards on the back of the case to facilitate the installation of the motherboard later.

5. Step 5: Install the motherboard. After the power supply is installed, you can fix the motherboard inside the chassis, determine the installation direction, and then use screws to fix the motherboard. Be careful not to make a mistake. You can confirm it by looking at the slot of the graphics card. It is generally easier to find the direction.

6. Step 6: Install the memory module. Take out the memory stick. If it is two memory sticks, it is recommended to install it in slots 1-3. If it is a single memory stick, install it in the second slot. After the memory stick is installed, press the fixing rings on both sides to ensure The memory stick will not loosen.

7. Step 7: Install the graphics card. Then take out the graphics card, align it with the slot and install it. At the same time, use a screwdriver to fix the graphics card on the chassis to ensure that the graphics card does not shake left and right, and the interface of the graphics card needs to face the outside of the chassis.

8. Step 8: Wiring. After these are installed, you can observe the layout of the chassis, and then start wiring. In principle, it is better to be as simple as possible. You need to connect the graphics card, motherboard and power supply. At the same time, the motherboard may also need to be connected to the graphics card.

8. Step 9: Others. If there is an optical drive on the host, you need to install it on the upper part of the chassis and fix it with a screwdriver. Then connect the power supply and motherboard. After all the cables are connected, you can connect the monitor to test whether it can boot normally.

How to assemble the chassis?

First of all, you have to buy accessories online or in the mall. The accessories for assembling a computer generally include: CPU, motherboard, memory, graphics card, hard drive, optical drive, monitor, chassis, power supply, keyboard and mouse.

Before installation, you should learn the basic knowledge of computers, including hardware structure, daily maintenance knowledge, common troubleshooting, operating system and commonly used software installation, etc.

The accessories for assembling a computer generally include: CPU, motherboard, memory, graphics card, hard drive, optical drive, monitor, chassis, power supply, keyboard and mouse.

When assembling a computer, usually follow the following steps:

(1) Installation of the chassis, mainly unpacking the chassis and installing the power supply in the chassis.

(2)CPU installation, insert the required CPU into the motherboard processor socket, and apply thermal grease to install the cooling fan.

(3) To install the memory module, insert the memory module into the motherboard memory slot. Sometimes multiple modules are needed.

(4) For the installation of graphics card, select the appropriate slot according to the graphics card bus.

(5) Installation of sound card. Most of the mainstream sound cards in the market are sound cards with PCI slots (some motherboards are compatible with graphics cards and sound cards. This kind of integrated card has poor function. You can choose whether to install the above hardware according to your own needs. ).

(6) Installation of the motherboard, install and fix the motherboard inside the chassis (Note: In order to facilitate the installation of hardware on the motherboard, such as CPU, graphics card, memory module, please install the hardware on the motherboard in advance and then The motherboard is installed into the chassis).

(7) Driver installation, mainly for hard disk, optical drive and floppy drive.

(8) The connection between the chassis and the motherboard, that is, various indicator lights and power switch wires. The connection of PC speakers, as well as the connection of power cables and data cables of hard disk, optical drive and floppy drive.

Computer gaming case configuration?

The computer game console configuration depends on what games you play. If you only want lol, around 3,000 is enough. If you want to play chicken, it will cost around 5,000!

What are the steps to assemble the main chassis?

Before the chassis is assembled, the motherboard and its accessories must be matched. The order is generally: processor, radiator, memory, graphics card, hard disk, optical drive, power supply, various data cables and power cables. Do not install them into the chassis after completion. Light them up first. If there is no problem, then install them into the chassis. Connect the monitor, mouse, keyboard, speakers, headphones and other peripherals, and turn on the power. If it boots normally, you can start the system.

Is it common to assemble computer cases?

generic.

is universal, but you should note that there are differences in sizes.

A large motherboard can be used with a large chassis, and a small motherboard can be used in any size chassis.

Some small cases can also support large motherboards. The motherboard specifications indicate which motherboards are supported.

Assemble the host, but don’t have a chassis?

Assembling a computer host can be assembled and run without a chassis, but the host plays a role in fixing and integrating. You can assemble the machine by directly connecting all the graphics card, motherboard, hard drive to the power supply, and it can be run.

The highest configuration to assemble a computer case?

Intel i99980XE boxed, 17,299 pieces, Asus X299 R6E motherboard, 10,000 pieces, Corsair 16GDDR43200 Platinum Ruler Blocks, ASUS RTX2080ti-O11G Raptor, two sheets, 25,999 blocks, Corsair AX1600i rated 1600W power supply, 2,999 blocks, ASUS RGB RGB GX601 Helios chassis, 1,899 blocks, Corsair 150iPRORGB integrated water-cooled 360 radiator, 1,299 blocks, Samsung C49RG90SSC monitor 4K resolution Rate + 120 refresh rate 48.8-inch curved screen, 16,999 yuan,

How to assemble a small main chassis?

The steps for assembling a small computer case can be briefly summarized as follows:

1. Preparation:

- Make sure you have all the parts you need, including motherboard, CPU, Memory, hard drive, power supply, graphics card, etc.

- Clear the work area and ensure the desktop is clear and spacious for assembly work.

- Read and accurately follow the operating manuals and instructions for the main chassis and other hardware devices.

2. Install the motherboard:

- Insert the motherboard into the main chassis and align it with the input/output connectors on the back panel of the main chassis.

- Use screws to secure the motherboard, usually low-profile screws to the corners of the motherboard. Make sure the screws are not too tight to avoid damaging the motherboard.

3. Install the CPU, memory and graphics card:

- Install the CPU into the CPU slot of the motherboard according to the instructions in the motherboard manual.

- Install the memory module into the memory slot of the motherboard.

- If necessary, install the graphics card into the PCIe slot on the motherboard.

4. Install the hard drive and other devices:

- Install the hard drive or SSD into the hard drive compartment of the main chassis and secure it with screws.

- Connect data and power cables to hard drives and other devices. Make sure the connection is correct and fastened reliably.

5. Connect the power supply:

- Install the power supply into the main chassis and secure it with screws.

- According to the needs of each hardware device, connect the appropriate power cord to the motherboard, graphics card, hard disk and other components.

6. Connect other accessories:

- Connect external devices such as monitors, keyboards, mice, and audio devices.

7. Verify and organize:

- Double-check all components and connections to make sure they are securely and correctly installed.

- Organize electrical and data cables so they are neat and orderly to provide better air flow and cooling.

8. Perform the first power-on test:

- Connect the power supply and start the computer, enter the BIOS interface for settings and verification.

- If everything is fine, you can proceed with installing the operating system and other required software.

Please note that the above is a brief overview and each host chassis and hardware device may have some specific details and differences. Therefore, before assembly, be sure to read and follow the operating manual and guidelines for each hardware device to ensure the assembly process is completed correctly and safely.

NAS chassis recommendation?

Personally, I think the best nas chassis is still the gen8 chassis produced by HP, although it has been out for many years. If you still want to do more with less money, then choose Snail Slag.

ATX chassis recommended?

Recommended i7 8700+16g+2060.

This set uses the Intel platform, processor i7 8700 six cores and twelve threads, main frequency: 3.2GHz, maximum core frequency: 4.6GHz, paired with Gigabyte b360 aorus motherboard, Corsair 3000 frequency 16g memory, Intel 256g m2 solid state, Gigabyte 2060 graphics card, 60% faster than the previous generation graphics card GeForce GTX 1060, and the gaming experience is comparable to GeForce GTX 1070 Ti

The above is the detailed content of Chassis assembly steps? How to assemble the chassis?. For more information, please follow other related articles on the PHP Chinese website!