How to connect Gigabyte motherboard boot cable?

Want to know how to connect the power-on cable of Gigabyte motherboard? PHP editor Xigua will help you understand the relevant content of Gigabyte motherboard boot cable connection and help you solve the problem.

How to connect Gigabyte motherboard boot cable?

2. USB3.0 interface, fool-proof design, just plug it in.

3. SPERKER=buzzer.

4. Find the corresponding interface on the motherboard. Just plug it in! PW=POWER SW (does not distinguish between positive and negative poles); RES=RESET SW (does not distinguish between positive and negative poles); PWR LED=POWER LED (distinguishes between positive and negative poles, follow the markings on the motherboard and chassis, and connect accordingly); HD=H.D.D LED, (distinguish between positive and negative poles, mark them on the motherboard and chassis, and connect them accordingly); SPEAK=SPERKER (distinguish between positive and negative poles, mark them on both the motherboard and chassis, and connect them accordingly); USB3.0 interface, fool-proof design, Just insert it as it is.

5. USB2.0 has a fool-proof function. The upper row has 5 pins and the lower row has 4 pins. Connect them accordingly.

6. Done.

Extended information

1. Plug the power supply next to the missing pin.

2. Plug in the power supply and reset it.

3. Plug the power light next to the power supply, with the negative pole close to the power jumper.

4. Plug the hard disk light next to the reset, and the negative pole is close to the reset jumper.

Does the Gigabyte motherboard always display the motherboard interface when it is turned on?

It may be a problem with bios settings, the solution;

1. Press the bios startup button, select Chinese mode, and click "Advanced Mode" at the bottom;

2. In the bios menu bar, click "Start", find "If an error occurs, wait to press the f1 key", and select "Close" from the corresponding right option;

3. Press f10 to save and restart the computer. The problem of the motherboard logo stuck on boot has been solved.

The motherboard supports incoming call startup, why can’t it start?

1. Turn on the computer and click the DEL key to enter the BIOS interface. In the Advance option - APM option - the Erp option is set to "Disabled";

2. Set the Power on By RTC option to " Enabled";

3. Set the time you need for the machine to automatically turn on (RTC Alarm Date is set to "0", it is every day);

4. Save the settings;

5. Enter the BIOS to confirm that the time is set, then shut down and enter the system.

The above is the detailed content of How to connect Gigabyte motherboard boot cable?. For more information, please follow other related articles on the PHP Chinese website!