How to install dual CPU fans on the motherboard?

Is it difficult to install the motherboard with dual CPU fans? PHP editor Xiaoxin has everything to teach you! For newbies, CPU dual fan installation motherboard can be a daunting task. This article will delve into this issue and provide you with a detailed installation guide. From understanding your motherboard type and fan specifications to properly installing and securing your fans, our experts will walk you through the process step by step. Please read on to easily master the tips for installing dual CPU fans to make your computer run smoother and more stable.

How to install dual CPU fans on the motherboard?

1. Connect the power cord of one of the fans to the sys fan socket (there are multiple sys fan sockets on the motherboard, find one that is close enough for wiring) 2. Use the large 4PIN to convert 4 small 3PINs Adapter cable.

3. There are card slots on each side of the fan radiator. When you buy a CPU fan alone, the accessories will be marked on it. If you have a CPU radiator card set, you can install it. In order to avoid mismatch between the card set and the card slot, it is recommended to buy it. Same brand.

4. All other 3pin and 4pin interfaces on the motherboard can drive fans. If there is no temperature control, you can connect all three pins on the end of the guide plate.

5. The heat dissipation bottleneck of dual heat pipes is the number of heat pipes. The heat dissipation effect increased by adding one more fan is very limited, which is not as good as that of four heat pipes and a single fan. Installing the CPU fan is the first difficulty that novices encounter when installing a computer, mainly due to their relative unfamiliarity. According to the type of CPU radiator, it can be roughly divided into two types: air cooling and water cooling. Among them, water cooling is generally chosen by players who pursue high performance, especially some players who pursue powerful overclocking, and even use "liquid nitrogen" to instantly cool down the CPU. Conventional air-cooled radiators are divided into two types: "down-pressure type" and "side-blowing type". Among them, the motherboards of the AMD platform are all pre-installed with a radiator base. Whether it is the original push-down or side-blowing type, it is directly buckled on the CPU, and then the pressure rod is stuck. It is simple and clear, so I won’t go into details. I mainly take the mainstream Intel platform as an example. The most common problems are: 1. The original radiator cannot be installed;

2. The direction of the side-blowing fan is wrong. The correct orientation of the side-blowing fan: Compared with the down-pressure air cooling, the side-blowing cooling efficiency is higher, and the large-area heat sink needs to be dissipated by fans installed on both sides, so the orientation of the radiator is very important. The installation method of the radiator, taking the most common single fan as an example, the fan is on the side of the memory slot, and the protruding side of the fan blade is outside.

How to install a fan on h61 motherboard?

First install the CPU, then install the cooling fan, connect the fan power supply, then insert the memory and graphics card; after everything is plugged in, you need to fix the motherboard into the chassis, and then the power supply hits the chassis. Connect the power supply first. Motherboard 24p power supply, cup4p or 8p power supply, graphics card 6p or 12p or others, then connect the hard drive interface and hard drive power supply.

Finally, follow the motherboard instructions and plug the cable from the front panel of the chassis to the motherboard.

The above is the detailed content of How to install dual CPU fans on the motherboard?. For more information, please follow other related articles on the PHP Chinese website!