Do I need to plug in a network cable when assembling a computer now?

Do I need to plug in a network cable when assembling a computer? This problem troubles many DIY enthusiasts. PHP editor Yuzi brings you detailed explanations to help you solve the confusion you encounter when assembling your computer. The following content will discuss the role of network cables in assembling a computer, how to handle them in different situations, and other matters that need attention.

Do I need to plug in a network cable to assemble the computer now?

Now when assembling a computer, you do not need to plug in a network cable. When assembling a computer, you need to install the motherboard, CPU, memory, hard disk, power supply, etc. into the chassis, and then install the power cord and each connecting cable, and assemble the various components. If you need to install the operating system in the future, you can use a USB flash drive to install the operating system. You can complete the drive for each hardware without being connected to the Internet. The whole process does not require plugging in network cables.

What configuration is better for assembling a computer now?

Assembled desktop computer configuration

1. High-configuration desktop computer recommendations:

First choice 1: Intel G1620 dual-core + H61M motherboard. (Low price, good performance, great value!)

Preferred 2: Intel G1840 dual-core +H81M motherboard. (Core graphics card performance is stronger than G1620)

2. Recommendation for mid-level models:

First choice 1: intel G3250 dual-core + H81M motherboard + GT740 independent graphics.

Preferred 2: AMD The power consumption is higher, the temperature is higher, and the stability of long-term operation is lower than Intel. Second, the price of the matching interface motherboard is higher.

Although the X4 860K uses a new core, the technology has been improved, and the power consumption has been reduced. However, due to the lower frequency and the fact that the new core has not been substantially improved, the performance is weaker than the X4 760K (but the margin is very small) Less than 3%, so they can basically be regarded as having the same performance)

APU preferred: A8-6600K+A85/A88 (not suitable for independent graphics)

A8-6600K is a cost-effective A higher processor, the current price is much lower than the A10-7700K (to your surprise, the CPU performance of the latter is even lower)

What drivers need to be installed to assemble a computer now?

1 When assembling a computer, you need to install drivers for the motherboard, graphics card, sound card, network card, printer and other hardware to ensure that the hardware can work properly. 2 The purpose of installing the driver is to enable the operating system to correctly identify and use the hardware device. Otherwise, the hardware may not work properly or work abnormally. 3 In addition, you also need to install some commonly used software and tools, such as anti-virus software, browsers, office software, etc., to meet personal and work needs.

Is it common to add a CD-ROM drive when assembling a computer nowadays?

It is still useful to add an optical drive when assembling a computer now. You can install the system using U disk, hard disk installation method, etc., but:

1. The motherboard driver is better than the CD-ROM driver that comes with the machine when you purchase it, which requires a CD-ROM drive;

2. If To burn CDs, such as music CDs, software CDs, etc., you need a CD-ROM drive;

3. If you need to use a CD-ROM to install the system (there is no U disk, there is a problem with the U disk, or the U disk cannot be displayed), you need a CD-ROM drive;

4. When installing the wireless network card driver (the driver that comes with the wireless network card is usually a CD), a CD-ROM drive is required.

Would you choose d5 or d4 when assembling computer memory?

Choose d5

What you need to know is that upgrading to DDR5 memory requires the support of a new generation of processors and platforms, namely Intel 12/13 generation Core processors and 600/700 series motherboards, or AMD 7000 series processors and the latest AM5 platform require memory, motherboard and CPU.

When assembling a computer now, is it better to use the original CPU fan or buy another branded fan?

Of course it is better to use the original ones.

When assembling a computer, if your CPU is used normally and does not need to run some large games, then the original fan is enough. If you often need to overclock, then you need to purchase another brand fan. .

How profitable is it now to assemble computers?

What is the general profit of a computer?

Branded computers: (excluding commercial machines and servers) the profit is about 15% of the price, and 5% of the price is the highest for low-end assembled computers. That's 10%.

If you are assembling a low-end performance computer. The profit is about 150~200.

If you are assembling a computer with mid-to-low-end performance, the profit is about 200~280.

If you are assembling a mid-to-high-end performance computer. The profit is about 280~400.

If you assemble a high-end computer, the profit should be around 450~600.

In fact, the profits from computer assembly come only from motherboards, graphics cards, memory, chassis, hard drives, monitors, power supplies, DVDs, and CPUs.

Among them, if calculated according to mid-to-high-end performance, the graphics card is about 380, with a profit of about 30, the memory is 4G, 85 per piece, with a profit of about 30, the motherboard is 750, with a profit of about 50, and the hard disk is 500G. The price About 400, a profit of about 50, a 22-inch monitor is 500, a profit of about 50, a chassis is 200, a profit of about 30. In fact, power supply and DVD are less profitable, and the profit together is about 30. CPU4 core, about 500, makes a profit of 70.

Is it still cost-effective to buy accessories and assemble a computer by yourself now?

Just answer it briefly!

For notebooks, you can only buy a complete machine. This is common sense. You will definitely have various problems with it yourself. At most, you can add more memory sticks!

For desktop computers, it is best to configure them yourself, because the so-called after-sales service for brand-name machines is very superficial. If there is a problem, it is better to install a system yourself to solve it, so as not to have to deal with them for a week, and brand-name machines, Buying it for 8,000 yuan is not even as good as buying it yourself for 4,000 yuan... It's absolutely true

How much does it cost to assemble a computer?

Graphics card rtx2060 2500 yuan (supports ray tracing)

cpu R5 3600 1400 yuan

Motherboard: B450 600 yuan

m.2 Solid state drive 500G 600 Yuan

+ 4T mechanical hard drive 600 yuan

Main case with fan + power supply 600w 500 yuan

8G two memory sticks, 500 yuan

Keyboard and mouse Checklist for assembling a computer for 100 yuan

?

Assembling a computer does require a checklist, because when we assemble the computer, after determining the configuration and operation requirements of the computer, we can purchase some suitable motherboards online, and then determine the power supply, graphics card and other configurations based on the motherboard. If you ask, just make a list and ask the computer factory or dealer to buy directly

The above is the detailed content of Do I need to plug in a network cable when assembling a computer now?. For more information, please follow other related articles on the PHP Chinese website!