How to connect the Great Wall power supply to the motherboard?

The motherboard wiring method of Great Wall Power Supply troubles many beginners. PHP editor Yuzai will introduce in detail how to connect the Great Wall power supply to the motherboard. If you are having power wiring issues, continue reading this article for step-by-step guidance and clear instructions.

How to connect the Great Wall power supply to the motherboard?

1. Find the plug marked POWER on the wires drawn from the chassis;

2. Find the binding post on the motherboard (usually the one in the lower right corner) on the motherboard. ;

3. Find the words marked POWER or ON and plug them in;

4. Restart the reset plug, hard disk display light hdd led plug, etc. You can find the corresponding binding posts.

How to connect the power cord of Great Wall computer?

Hello, Great Wall computer power cords are divided into two types: motherboard power cord and hard drive power cord.

The motherboard power cord interface is 24-pin. It is generally connected to the motherboard. When connecting, pay attention to the direction of the connector. There is a small triangle on the plug. Insert it while aligning it with the indicator mark on the motherboard. After plugging it in tightly, Check whether it is stable and prevent loosening.

The hard disk power cord interface is generally 4-pin or 15-pin. It is generally connected to a hard disk or optical drive. Pay attention to the direction of the connector. There is also a small triangle on the plug. It should be aligned with the indicator mark on the device. Insert it, and check whether it is stable after inserting it tightly to prevent loosening.

When wiring, unplug the power plug first and then perform wiring to avoid excessive current from damaging the equipment or power supply.

The above is the detailed content of How to connect the Great Wall power supply to the motherboard?. For more information, please follow other related articles on the PHP Chinese website!