What about the Tsinghua Tongfang desktop computer host socket? Tsinghua Tongfang Taiwan?

Tsinghua Tongfang desktop computer host has a variety of sockets and rich functions. It is important to understand these sockets in order to properly connect peripherals and components. In this article, PHP editor Yuzai introduces to you in detail the types and uses of Tsinghua Tongfang desktop computer host sockets, and guides you to easily master computer connection and configuration.

What about the host socket of Tsinghua Tongfang desktop computer? Tsinghua Tongfang Taiwan?

There are two sockets on the back of the monitor. You should know the power socket. The other one is plugged into the socket with the same color and pins on the back of the host (the core display is the vertical one and the long one, and the independent display is under the audio interface. ), the mouse, and the keyboard are all on the first row of sockets. The colors should be the same. Then there is the network cable socket, and then the audio cable is plugged into the middle. If there are any, plug them according to the color, or try them all.

How to assemble Tsinghua Tongfang computer?

The process of assembling a desktop computer is as follows:

(1) The installation of the chassis mainly involves unpacking the chassis and installing the power supply in the chassis.

(2) Installation of the motherboard, install the motherboard on the chassis motherboard.

(3) To install the CPU, insert the required CPU into the motherboard processor socket and install a cooling fan.

(4) To install the memory module, insert the memory module into the motherboard memory slot.

(5) For the installation of the graphics card, select the appropriate slot according to the graphics card bus.

(6) Installation of sound card. Most of the mainstream sound cards on the market now are sound cards with PCI slots.

(7) Driver installation mainly focuses on hard disk, optical drive and floppy drive.

(8) The connection between the chassis and the motherboard, that is, various indicator lights and power switch wires. The connection of PC speakers, as well as the connection of power cables and data cables of hard disk, optical drive and floppy drive.

(9) Close the chassis cover (Theoretically, you can close the chassis cover after installing the host, but in order to check for future problems, it is best not to cover it first, and wait until the system is installed. cover it later).

(10) Installation of input devices, connecting keyboard and mouse to integrate with the host.

(11) Installation of output devices, that is, installation of monitors.

(12) Recheck each wiring and prepare for testing.

(13) Power on the machine. If the monitor can display normally, it indicates that the initial installation has been correct. At this time, enter the BIOS for initial system settings.

The hardware installation is finished.

The following is the installation of the operating system:

(14) Partition the hard disk and format the hard disk.

(15) Install the operating system, such as win7 or Windows XP system.

(16) After installing the operating system, install drivers, such as graphics card, sound card and other drivers.

How to turn on Tsinghua Tongfang desktop computer?

The way to start up the Tsinghua Tongfang desktop computer is to press the power switch on the chassis, and the monitor remains in the normally on state, which means to connect the monitor to the power supply first, then turn on the monitor power switch, and then shut down every time There is no need to turn off the monitor power switch. In this way, every time you turn on the computer, it will start up simultaneously with the monitor.

How to turn on Bluetooth on Tsinghua Tongfang desktop computer?

Open the settings of the mobile phone, and then connect to the network via Bluetooth.

How to replace the graphics card of Tsinghua Tongfang desktop computer?

1. Open the two screws at the rear of the chassis.

2. Open the chassis cover. It usually opens with just one push.

3. Find the graphics card in the PCI-E slot!

4, unscrew the graphics card screw.

5. Open the PCI-E card slot, and then pull out the graphics card!

What about the host socket of Tsinghua Tongfang desktop computer?

They are all standard motherboards, and the power cords all have directions. They are mainly PS2 keyboards. Now the keyboard head of Tongfang machine has a flat side. You can align it with the wide side of the chassis (if you are facing the Just plug it in directly at the back of the chassis (facing the right side). If the USB mouse cannot be plugged in, turn it over and plug it in. There are three audio holes at the bottom. The middle is the output, the right is the input, and the left is the microphone. That’s basically it, I wish you a happy life

Is the fan speed of Tsinghua Tongfang desktop computer slow?

Computer fan cooling is controlled by the computer itself, with low power consumption and slow speed, and high power consumption for heating.

How to add configurations to Tsinghua Tongfang’s desktop computer?

The configuration that I just warmed up: the host machine for my family: CPU Athlon 200ge, motherboard MSI a320, solid state: solid state coefficient sata green disk, power supply Huntkey: 300w. Memory, ADATA: 8g colorful, monitor: Tsinghua Tongfang 22 inches. A total of 1900 yuan. My family, it’s enough to read the web or watch TV. I can even play a league game when I go back.

Tsinghua Tongfang desktop computer network card driver is lost?

Use a U disk or mobile hard disk to copy the driver wizard. After installing it, open the driver wizard and you will be prompted that the network card driver is not installed. Just restart after the next step.

How to install Tsinghua Tongfang desktop computer system?

1. Turn on the computer. When you see the Tsinghua Tongfang startup screen, press the Del key to enter the Tsinghua Tongfang bios settings.

2. In the BIOS setting interface, press the ? direction key to move to the "System Boot Setup" item, and press the Enter key to enter.

3. In the startup item setting window, press the ? direction key to move to the Hard Disk Drives item, and press the Enter key to set it.

4. Select 1st Drive and press Enter, select the U disk boot item with the word USB, and press Enter to confirm the changes.

5. After setting, press the F10 key to pop up a prompt window and press the Enter key to save and exit. U disk, the full name is USB flash drive, and its English name is "USB flash disk". It is a micro high-capacity mobile storage product that uses a USB interface and does not require a physical drive. It is connected to the computer through the USB interface to achieve plug-and-play functionality. The name USB flash drive originally came from a new type of storage device produced by Netac Technology, called "USB flash drive", which is connected using a USB interface. After connecting to the USB interface of the computer, the data on the USB flash drive can be exchanged with the computer. Since Netac has registered patents for equipment with similar technology produced later, it can no longer be called "U disk" and is renamed the homophonic "U disk". Later, the name USB flash drive became widely known because it is simple and easy to remember.

The above is the detailed content of What about the Tsinghua Tongfang desktop computer host socket? Tsinghua Tongfang Taiwan?. For more information, please follow other related articles on the PHP Chinese website!