How to adjust the program after replacing the mainboard of Samsung washing machine?

This problem has troubled many users. After the mainboard of Samsung washing machine is replaced, the program cannot be adjusted normally, which affects the washing efficiency. PHP editor Xiaoxin has specially compiled this guide to provide you with a detailed explanation of the program debugging method after the Samsung washing machine motherboard is replaced. Continue reading this article to learn the specific steps and precautions to solve your laundry worries.

#How to adjust the program after replacing the motherboard of Samsung washing machine?

If the program is lost after the Samsung washing machine motherboard is replaced, you can try the following steps to reset the program:

Put the clothes into the washing machine and make sure the clothes are dry.

Category and wash clothes according to different categories.

Choose a washing method: Choose the appropriate washing method according to the type of clothes and the degree of soiling.

Set the washing time and temperature: Set the appropriate washing time and temperature according to the type and degree of dirt of the clothes.

Start the washing machine: Press the start button and the washing machine starts to work.

Observe the operating status of the washing machine: Pay attention to the operating status of the washing machine. If a problem occurs, stop the washing machine in time and check the cause.

Complete washing: When the washing machine has finished washing, take out the clothes and dry them to dry.

If the above steps cannot solve the problem, it is recommended to contact professional technicians for further inspection and repair.

How to install the Samsung washing machine computer motherboard?

If the water is filled when the power is turned on or pressed, the main board or water inlet valve needs to be replaced. If the water is drained when the power is turned on, the main board or tractor must be replaced.

2. The alarm will sound when the power is turned on. This phenomenon is called water level alarm. The mainboard cannot detect the water level, causing this failure. Focus on checking the water level switch wire and replace it.

3. Samsung washing machine does not dehydrate. First, observe whether the washing machine pulsator rotates in two directions. If it rotates in one direction, please replace the main board; if it rotates in two directions, check whether there is a safety alarm. If there is an alarm, check the safety switch and related circuits. If there is no alarm, , the washing machine keeps draining water. There can only be two reasons. One is that the water level switch is broken, and the other is that the drain is blocked.

4. When the power is turned on, the button display is normal, but there is no function. For this phenomenon, for machines that replace the motherboard, you only need to reverse the AC220V plug of the power supply line.

5. Water keeps coming in. After checking, the water inlet valve is not broken, it does not dehydrate when set to dehydration, and it does not sound safe, then it is determined that the water level switch is broken.

6. After replacing the main board, if the actual water level does not match the set water level, you only need to adjust the water level sensor. Place the water level flat, with the nut facing upward. The clockwise direction is to decrease the value, and the counterclockwise direction is to increase the value.

The above is the detailed content of How to adjust the program after replacing the mainboard of Samsung washing machine?. For more information, please follow other related articles on the PHP Chinese website!