search
HomeComputer TutorialsTroubleshootingHow to assemble a small main chassis? Chassis assembly steps?

Assembling small main chassis often encounters problems such as limited space. How to assemble it efficiently and beautifully? In this article, PHP editor Zimo will explain in detail the steps and precautions for assembling a small host box, and guide you to assemble a compact and practical host from scratch.

小主机箱怎么组装? 机箱组装步骤?

How to assemble a small main chassis?

The steps for assembling a small computer case can be briefly summarized as follows:

1. Preparation:

- Make sure you have all the parts you need, including motherboard, CPU, Memory, hard drive, power supply, graphics card, etc.

- Clear the work area and ensure the desktop is clear and spacious for assembly work.

- Read and accurately follow the operating manuals and instructions for the main chassis and other hardware devices.

2. Install the motherboard:

- Insert the motherboard into the main chassis and align it with the input/output connectors on the back panel of the main chassis.

- Use screws to secure the motherboard, usually low-profile screws to the corners of the motherboard. Make sure the screws are not too tight to avoid damaging the motherboard.

3. Install the CPU, memory and graphics card:

- Install the CPU into the CPU slot of the motherboard according to the instructions in the motherboard manual.

- Install the memory module into the memory slot of the motherboard.

- If necessary, install the graphics card into the PCIe slot on the motherboard.

4. Install the hard drive and other devices:

- Install the hard drive or SSD into the hard drive compartment of the main chassis and secure it with screws.

- Connect data and power cables to hard drives and other devices. Make sure the connection is correct and fastened reliably.

5. Connect the power supply:

- Install the power supply into the main chassis and secure it with screws.

- According to the needs of each hardware device, connect the appropriate power cord to the motherboard, graphics card, hard disk and other components.

6. Connect other accessories:

- Connect external devices such as monitors, keyboards, mice, and audio devices.

7. Verify and organize:

- Double-check all components and connections to make sure they are securely and correctly installed.

- Organize electrical and data cables so they are neat and orderly to provide better air flow and cooling.

8. Perform the first power-on test:

- Connect the power supply and start the computer, enter the BIOS interface for settings and verification.

- If everything is fine, you can proceed with installing the operating system and other required software.

Please note that the above is a brief overview and each host chassis and hardware device may have some specific details and differences. Therefore, before assembly, be sure to read and follow the operating manual and guidelines for each hardware device to ensure the assembly process is completed correctly and safely.

Chassis assembly steps?

1. Step 1: Tools and components. First of all, you need to prepare the corresponding tools, such as screwdrivers and screwdrivers. Simple tools are usually given when you purchase the case. At the same time, you must also prepare various components of the host such as motherboard, graphics card, memory stick, CPU, power supply, chassis, etc.

 2. Step 2: Install the CPU. The installation of the host starts with the CPU. Unpack the motherboard and CPU packaging boxes, take out the motherboard, find the location of its CPU interface, and press the lever down to open it. Then take out the CPU and align it for installation. Be gentle. Be slow and careful to avoid bending the CPU pins.

3. Step 3: Install the cooling fan. If it is a boxed CPU, it will come with a cooling fan, which can be installed on the motherboard together with the CPU. If you purchase a separate cooling fan yourself, you need to apply silicone grease to the CPU before installing the fan.

 4. Step 4: Install the power supply. Place the motherboard with the CPU installed next to it, first disassemble the case and then install the power supply. Here you need to use a screwdriver to tighten the screws to fix the power supply in the case, and remove some cards on the back of the case to facilitate the installation of the motherboard later.

5. Step 5: Install the motherboard. After the power supply is installed, you can fix the motherboard inside the chassis, determine the installation direction, and then use screws to fix the motherboard. Be careful not to make a mistake. You can confirm it by looking at the slot of the graphics card. It is generally easier to find the direction.

6. Step 6: Install the memory module. Take out the memory stick. If it is two memory sticks, it is recommended to install it in slot 1-3. If it is a single memory stick, install it in the second slot. After the memory stick is installed, press the fixing rings on both sides to ensure The memory stick will not loosen.

7. Step 7: Install the graphics card. Then take out the graphics card, align it with the slot and install it. At the same time, use a screwdriver to fix the graphics card to the chassis to ensure that the graphics card does not shake left and right, and the interface of the graphics card needs to face the outside of the chassis.

8. Step 8: Wiring. After these are installed, you can observe the layout of the chassis, and then start wiring. In principle, it is better to be as simple as possible. You need to connect the graphics card, motherboard and power supply. At the same time, the motherboard may also need to be connected to the graphics card.

8. Step 9: Others. If there is an optical drive on the host, you need to install it on the upper part of the chassis and fix it with a screwdriver. Then connect the power supply and motherboard. After all the cables are connected, you can connect the monitor to test whether it can boot normally.

How to assemble the chassis?

First of all, you have to buy accessories online or in the mall. The accessories for assembling a computer generally include: CPU, motherboard, memory, graphics card, hard drive, optical drive, monitor, chassis, power supply, keyboard and mouse.

Before installation, you should learn the basic knowledge of computers, including hardware structure, daily maintenance knowledge, common troubleshooting, operating system and commonly used software installation, etc.

The accessories for assembling a computer generally include: CPU, motherboard, memory, graphics card, hard drive, optical drive, monitor, chassis, power supply, keyboard and mouse.

When assembling a computer, usually follow the following steps:

(1) Installation of the chassis, mainly unpacking the chassis and installing the power supply in the chassis.

(2)CPU installation, insert the required CPU into the motherboard processor socket, and apply thermal grease to install the cooling fan.

(3) To install the memory module, insert the memory module into the motherboard memory slot. Sometimes multiple modules are needed.

(4) For the installation of graphics card, select the appropriate slot according to the graphics card bus.

(5) Installation of sound card. Most of the mainstream sound cards in the market are sound cards with PCI slots (some motherboards are compatible with graphics cards and sound cards. This kind of integrated card has poor function. You can choose whether to install the above hardware according to your own needs. ).

(6) Installation of the motherboard, install and fix the motherboard inside the chassis (Note: In order to facilitate the installation of hardware on the motherboard, such as CPU, graphics card, memory module, please install the hardware on the motherboard in advance and then The motherboard is installed into the chassis).

(7) Driver installation, mainly for hard disk, optical drive and floppy drive.

(8) The connection between the chassis and the motherboard, that is, various indicator lights and power switch wires. The connection of PC speakers, as well as the connection of power cables and data cables of hard disk, optical drive and floppy drive.

Where is the computer desktop case?

It is appropriate to place the computer desk chassis on the left side, but it also depends on the design space of the computer desk. If the position of the computer desk to place the host is on the left, then place the host on the left, and if it is placed on the right On the right side, if you use an ordinary desk to place your computer, you can also place the host on the desktop, as long as it does not affect normal use. You can also place it according to your own habits.

How to assemble a computer desk?

1. First disassemble the machine and check whether the accessories are complete.

2, install the bottom plate first.

3. Install drawer slides and door hinges.

4, and then connect it to the base plate.

5, then install the side shelves.

6, then combine the two together.

7, then assemble the drawer.

8, install the upper panel.

9, then put the drawer on, and you're done.

How to assemble a computer desk?

1. First disassemble the machine and check whether the accessories are complete.

2, install the bottom plate first.

3. Install drawer slides and door hinges.

4, and then connect it to the base plate.

5, then install the side shelves.

6, then combine the two together.

7, then assemble the drawer.

8, install the upper panel.

9, then put the drawer on, and you're done.

What are the steps to assemble the main chassis?

Before the chassis is assembled, the motherboard and its accessories must be matched. The order is generally: processor, radiator, memory, graphics card, hard disk, optical drive, power supply, various data cables and power cables. Do not install them into the chassis after completion. Light them up first. If there is no problem, then install them into the chassis. Connect the monitor, mouse, keyboard, speakers, headphones and other peripherals, and turn on the power. If it boots normally, you can start the system.

Is it common to assemble computer cases?

generic.

is universal, but you should note that there are differences in sizes.

A large motherboard can be used with a large chassis, and a small motherboard can be used in any size chassis.

Some small cases can also support large motherboards. The motherboard specifications indicate which motherboards are supported.

Assemble the host, but don’t have a chassis?

Assembling a computer host can also be assembled and run without a chassis, but the host plays a role in fixing and integrating. You can assemble the machine by directly connecting all the graphics card, motherboard, hard drive to the power supply, and it can be run.

The highest configuration to assemble a computer case?

Intel i99980XE boxed, 17,299 pieces, Asus X299 R6E motherboard, 10,000 pieces, Corsair 16GDDR43200 Platinum Ruler Blocks, ASUS RTX2080ti-O11G Raptor, two sheets, 25,999 blocks, Corsair AX1600i rated 1600W power supply, 2,999 blocks, ASUS RGB RGB GX601 Helios chassis, 1,899 blocks, Corsair 150iPRORGB integrated water-cooled 360 radiator, 1,299 blocks, Samsung C49RG90SSC monitor 4K resolution Rate 120 refresh rate 48.8-inch curved screen, 16999 yuan,

The above is the detailed content of How to assemble a small main chassis? Chassis assembly steps?. For more information, please follow other related articles on the PHP Chinese website!

Statement
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn
What if KB5055683 Fails to Install? Here Are Some FixesWhat if KB5055683 Fails to Install? Here Are Some FixesApr 21, 2025 pm 08:03 PM

The KB5055683 cumulative update is designed to improve the quality and reliability of .NET Framework 3.5, 4.8 and 4.8.1 in Windows 10 systems. If you encounter the failure of KB5055683 installation, how to solve it? This article will provide effective solutions. Windows 10 KB5055683 Update KB5055683 is a cumulative update for .NET Framework 3.5, 4.8 and 4.8.1 for Windows 10 22H2 versions, released on April 8, 2025. This update contains all security improvements from previous versions, but no new security improvements were added. It is recommended that you download and install KB50 as soon as possible

Fresh Guide! Fix REMATCH A D3D12-compatible GPU ErrorFresh Guide! Fix REMATCH A D3D12-compatible GPU ErrorApr 21, 2025 pm 08:01 PM

Encountering the REMATCH D3D12-compatible GPU error on Windows? This guide provides solutions to get you back in the game. REMATCH, a multiplayer online football game, requires a graphics card supporting DirectX 12 (Feature Level 12.0, Shader Model

Clone a Hard Drive Without OS, Watch Pro Guide with Easy StepsClone a Hard Drive Without OS, Watch Pro Guide with Easy StepsApr 21, 2025 am 10:24 AM

This guide shows you how to clone a hard drive even if your Windows system won't boot. MiniTool ShadowMaker simplifies this process. Windows boot failures are common, caused by issues like corrupted system files or MBR errors. Cloning your hard dri

League of Legends Play Button Not Working on PC: ResolvedLeague of Legends Play Button Not Working on PC: ResolvedApr 21, 2025 am 10:09 AM

The League of Legends game buttons do not work properly, resulting in the inability to enter the game? don’t worry! This guide will guide you to solve this problem quickly and effectively, allowing you to easily resume the game. Just follow the steps below to quickly resolve the game button issue! Quick navigation: League of Legends game buttons don't work How to fix League of Legends game buttons not working on PC Summarize League of Legends game buttons don't work As a MOBA game, League of Legends continues to attract global players and has a huge and stable player group. To enhance the gaming experience, Riot Games regularly releases updates to introduce new content, but this doesn't always go smoothly. Sometimes, some accidental technical failures may occur after a new update, such as League of Legends games

How to use Plex to create your own private Netflix or SpotifyHow to use Plex to create your own private Netflix or SpotifyApr 20, 2025 am 10:13 AM

Build Your Own Streaming Service with Plex: A Step-by-Step Guide We're accustomed to on-demand content at our fingertips, thanks to services like Netflix and Spotify. However, building a personal media library offers unique advantages: ownership and

Spotlight on How to Fix Taskbar Search Bar Blank Box on WindowsSpotlight on How to Fix Taskbar Search Bar Blank Box on WindowsApr 19, 2025 pm 08:06 PM

Troubleshooting a Blank Windows 11/10 Taskbar Search Box A blank search bar in Windows 10 or 11 severely impacts usability. This guide offers solutions to resolve this common issue, preventing you from easily searching for apps and files. The Proble

How to Fix Forever Skies Crashing? Try the 6 Effortless WaysHow to Fix Forever Skies Crashing? Try the 6 Effortless WaysApr 19, 2025 pm 08:01 PM

Encountering crashes in Forever Skies? This guide offers solutions to get your game running smoothly. We'll cover troubleshooting steps for crashes on startup and provide fixes for common causes. Forever Skies Crashes at Startup: Common Causes Fore

Device Manager Is Blank or Not Showing Anything? Fix It NowDevice Manager Is Blank or Not Showing Anything? Fix It NowApr 19, 2025 pm 06:02 PM

Troubleshooting a Blank Device Manager in Windows Device Manager, a crucial Windows utility for managing hardware, can sometimes fail to display any content. This issue, often caused by disabled services or registry permission problems, can lead to v

See all articles

Hot AI Tools

Undresser.AI Undress

Undresser.AI Undress

AI-powered app for creating realistic nude photos

AI Clothes Remover

AI Clothes Remover

Online AI tool for removing clothes from photos.

Undress AI Tool

Undress AI Tool

Undress images for free

Clothoff.io

Clothoff.io

AI clothes remover

Video Face Swap

Video Face Swap

Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Tools

Atom editor mac version download

Atom editor mac version download

The most popular open source editor

SublimeText3 Linux new version

SublimeText3 Linux new version

SublimeText3 Linux latest version

mPDF

mPDF

mPDF is a PHP library that can generate PDF files from UTF-8 encoded HTML. The original author, Ian Back, wrote mPDF to output PDF files "on the fly" from his website and handle different languages. It is slower than original scripts like HTML2FPDF and produces larger files when using Unicode fonts, but supports CSS styles etc. and has a lot of enhancements. Supports almost all languages, including RTL (Arabic and Hebrew) and CJK (Chinese, Japanese and Korean). Supports nested block-level elements (such as P, DIV),

Zend Studio 13.0.1

Zend Studio 13.0.1

Powerful PHP integrated development environment

SecLists

SecLists

SecLists is the ultimate security tester's companion. It is a collection of various types of lists that are frequently used during security assessments, all in one place. SecLists helps make security testing more efficient and productive by conveniently providing all the lists a security tester might need. List types include usernames, passwords, URLs, fuzzing payloads, sensitive data patterns, web shells, and more. The tester can simply pull this repository onto a new test machine and he will have access to every type of list he needs.