search
HomeDatabaseMysql TutorialOracle 11g Data Guard: How to start and stop Redo Apply

1 Starting Redo Apply To start apply services on a physical standby database, ensure thephysical standby database is started and mounted and then start Redo Applyusing the SQL ALTER DATABASE RECOVER MANAGED STANDBY DATABASE statement. You

1 Starting Redo Apply

 

To start apply services on a physical standby database, ensure thephysical standby database is started and mounted and then start Redo Applyusing the SQL ALTER DATABASE RECOVER MANAGED STANDBY DATABASE statement.

You can specify that Redo Apply runs as a foreground session or as abackground process, and enable it with real-time apply.

  • To start Redo Apply in the foreground, issue the following SQL statement:
    SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE;

 

  • If you start a foreground session, control is not returned to the command prompt until recovery is canceled by another session.
  • To start Redo Apply in the background, include the DISCONNECT keyword on the SQL statement. For example:
    SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT;

 

alterdatabase recover managed standby database disconnect from session;

 

  • This statement starts a detached server process and immediately returns control to the user. While the managed recovery process is performing recovery in the background, the foreground process that issued the RECOVER statement can continue performing other tasks. This does not disconnect the current SQL session.
  • To start real-time apply, include the USING CURRENT LOGFILE clause on the SQL statement. For example:
    SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE;

 

alterdatabase recover managed standby database using current logfile disconnect fromsession;

 

2 Stopping Redo Apply

 

To stop Redo Apply, issue the following SQL statement:

SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;

 

 

3 Advanced Configuration

3.1 Using Real-Time Apply to ApplyRedo Data Immediately

If the real-time apply feature is enabled, apply services can applyredo data as it is received, without waiting for the current standby redo logfile to be archived. This results in faster switchover and failover timesbecause the standby redo log files have been applied already to the standbydatabase by the time the failover or switchover begins.

Use the ALTER DATABASE statement to enable the real-time applyfeature, as follows:

  • For physical standby databases, issue the ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE statement.
  • For logical standby databases, issue the ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE statement.

Real-time apply requires a standbydatabase that is configured with a standby redo log and that is in ARCHIVELOGmode.

 

The figure belowshowsa Data Guard configuration with a local destination and a standby destination.As the remote file server (RFS) process writes the redo data to standby redolog files on the standby database, apply services can recover redo from standbyredo log files as they are being filled.

 

Oracle 11g Data Guard: How to start and stop Redo Apply

 

3.2 Specifying a Time Delay for theApplication of Archived Redo Log Files

 

In some cases, you may want to create a time lag between the timewhen redo data is received from the primary site and when it is applied to thestandby database. You can specify a time interval (in minutes) to protectagainst the application of corrupted or erroneous data to the standby database.When you set a DELAY interval, it does not delay the transport of the redo datato the standby database. Instead, the time lag you specify begins when the redodata is completely archived at the standby destination.

 

Note:

If you define a delay for a destination that has real-time applyenabled, the delay is ignored.

 

Specifying a Time Delay

You can set a time delay on primary and standby databases using theDELAY=minutes attribute of theLOG_ARCHIVE_DEST_n initializationparameter to delay applying archived redo log files to the standby database. Bydefault, there is no time delay. If you specify the DELAY attribute withoutspecifying a value, then the default delay interval is 30 minutes.

 

Canceling a Time Delay

You can cancel a specified delay interval as follows:

  • For physical standby databases, use the NODELAY keyword of the RECOVER MANAGED STANDBY DATABASE clause:
    SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE NODELAY;
  • For logical standby databases, specify the following SQL statement:
    SQL> ALTER DATABASE START LOGICAL STANDBY APPLY NODELAY;

These commands result in apply services immediately beginning toapply archived redo log files to the standby database, before the time intervalexpires.

 

Using Flashback Database as anAlternative to Setting a Time Delay

As an alternative to setting an apply delay, you can use FlashbackDatabase to recover from the application of corrupted or erroneous data to thestandby database. Flashback Database can quickly and easily flash back astandby database to an arbitrary point in time.


作者:xiangsir

QQ:444367417

MSN:xiangsir@hotmail.com


Statement
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn
什么是oracle asm什么是oracle asmApr 18, 2022 pm 04:16 PM

oracle asm指的是“自动存储管理”,是一种卷管理器,可自动管理磁盘组并提供有效的数据冗余功能;它是做为单独的Oracle实例实施和部署。asm的优势:1、配置简单、可最大化推动数据库合并的存储资源利用;2、支持BIGFILE文件等。

oracle怎么查询所有索引oracle怎么查询所有索引May 13, 2022 pm 05:23 PM

方法:1、利用“select*from user_indexes where table_name=表名”语句查询表中索引;2、利用“select*from all_indexes where table_name=表名”语句查询所有索引。

Oracle怎么查询端口号Oracle怎么查询端口号May 13, 2022 am 10:10 AM

在Oracle中,可利用lsnrctl命令查询端口号,该命令是Oracle的监听命令;在启动、关闭或重启oracle监听器之前可使用该命令检查oracle监听器的状态,语法为“lsnrctl status”,结果PORT后的内容就是端口号。

oracle全角怎么转半角oracle全角怎么转半角May 13, 2022 pm 03:21 PM

在oracle中,可以利用“TO_SINGLE_BYTE(String)”将全角转换为半角;“TO_SINGLE_BYTE”函数可以将参数中所有多字节字符都替换为等价的单字节字符,只有当数据库字符集同时包含多字节和单字节字符的时候有效。

oracle怎么删除sequenceoracle怎么删除sequenceMay 13, 2022 pm 03:35 PM

在oracle中,可以利用“drop sequence sequence名”来删除sequence;sequence是自动增加数字序列的意思,也就是序列号,序列号自动增加不能重置,因此需要利用drop sequence语句来删除序列。

oracle怎么查询数据类型oracle怎么查询数据类型May 13, 2022 pm 04:19 PM

在oracle中,可以利用“select ... From all_tab_columns where table_name=upper('表名') AND owner=upper('数据库登录用户名');”语句查询数据库表的数据类型。

oracle查询怎么不区分大小写oracle查询怎么不区分大小写May 10, 2022 pm 05:45 PM

方法:1、利用“LOWER(字段值)”将字段转为小写,或者利用“UPPER(字段值)”将字段转为大写;2、利用“REGEXP_LIKE(字符串,正则表达式,'i')”,当参数设置为“i”时,说明进行匹配不区分大小写。

Oracle怎么修改sessionOracle怎么修改sessionMay 13, 2022 pm 05:06 PM

方法:1、利用“alter system set sessions=修改后的数值 scope=spfile”语句修改session参数;2、修改参数之后利用“shutdown immediate – startup”语句重启服务器即可生效。

See all articles

Hot AI Tools

Undresser.AI Undress

Undresser.AI Undress

AI-powered app for creating realistic nude photos

AI Clothes Remover

AI Clothes Remover

Online AI tool for removing clothes from photos.

Undress AI Tool

Undress AI Tool

Undress images for free

Clothoff.io

Clothoff.io

AI clothes remover

AI Hentai Generator

AI Hentai Generator

Generate AI Hentai for free.

Hot Article

R.E.P.O. Energy Crystals Explained and What They Do (Yellow Crystal)
2 weeks agoBy尊渡假赌尊渡假赌尊渡假赌
Repo: How To Revive Teammates
1 months agoBy尊渡假赌尊渡假赌尊渡假赌
Hello Kitty Island Adventure: How To Get Giant Seeds
4 weeks agoBy尊渡假赌尊渡假赌尊渡假赌

Hot Tools

SAP NetWeaver Server Adapter for Eclipse

SAP NetWeaver Server Adapter for Eclipse

Integrate Eclipse with SAP NetWeaver application server.

EditPlus Chinese cracked version

EditPlus Chinese cracked version

Small size, syntax highlighting, does not support code prompt function

Dreamweaver Mac version

Dreamweaver Mac version

Visual web development tools

Notepad++7.3.1

Notepad++7.3.1

Easy-to-use and free code editor

VSCode Windows 64-bit Download

VSCode Windows 64-bit Download

A free and powerful IDE editor launched by Microsoft