请使用RHEL/CentOS 6.4及更新版本内核的MySQL同志们注意,vm.swappiness = 0的默认行为修改了,如果继续设置vm.swappiness = 0,有可能导致系统内存溢出,从而导致MySQL被意外kill掉。
在之前的《LINUX上MYSQL优化三板斧》中,我们建议大家把 vm.swappiness = 0 设置好。来尽量避免MySQL的服务器内存被交换出去。这样Linux在把内存交换出去时更偏向于将cache页交换出去,而不是将inactive页交换出去。详细描述请参考:http://www.woqutech.com/?p=1200。
经常有人会问, vm.swappiness = 0会不会导致Linux在有swap空间的时候也不交换出去,从而导致内存溢出(OOM)。参照《LINUX上MYSQL优化三板斧》介绍,我们知道,这个值只是一个Linux在判断是否交换内存(swap)的一个“倾向”参考值,而并不是说,设置为0以后,Linux就完全不会使用内存交换空间。
但是,在较新的内核中(2.6.32-303.el6及以后),vm.swappiness = 0 的默认行为修改掉了,这个说法不再成立。设置该参数vm.swappiess=0,有可能导致MySQL数据库所在的系统出现内存溢出。一般来说,MySQL数据库占用的内存是整个服务器中最大的,根据Linux的策略,它会会首先把MySQL给Kill掉(调整 /proc/(pidof -s mysqld)/oom_adj可以改变OOM时kill的优先级),从而导致应用故障等。
这个修改是在内核3.5-rc1中提交的,并且合并到了2.6.32-303.el6及之后的各个版本。先让我们来看看这个patch:
http://gitorious.ti.com/ti-linux-kernel/ti-linux-kernel/commit/fe35004fbf9eaf67482b074a2e032abb9c89b1dd?format=patch
From fe35004fbf9eaf67482b074a2e032abb9c89b1dd Mon Sep 17 00:00:00 2001
From: Satoru Moriya
Date: Tue, 29 May 2012 15:06:47 -0700
Subject: [PATCH] mm: avoid swapping out with swappiness==0
Sometimes we'd like to avoid swapping out anonymous memory. In
particular, avoid swapping out pages of important process or process
groups while there is a reasonable amount of pagecache on RAM so that we
can satisfy our customers' requirements.
OTOH, we can control how aggressive the kernel will swap memory pages with
/proc/sys/vm/swappiness for global and
/sys/fs/cgroup/memory/memory.swappiness for each memcg.
But with current reclaim implementation, the kernel may swap out even if
we set swappiness=0 and there is pagecache in RAM.
This patch changes the behavior with swappiness==0. If we set
swappiness==0, the kernel does not swap out completely (for global reclaim
until the amount of free pages and filebacked pages in a zone has been
reduced to something very very small (nr_free + nr_filebacked
watermark)).
Signed-off-by: Satoru Moriya
Acked-by: Minchan Kim
Reviewed-by: Rik van Riel
Acked-by: Jerome Marchand
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
---
mm/vmscan.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 67a4fd4..ee97530 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1761,10 +1761,10 @@ static void get_scan_count(struct mem_cgroup_zone *mz, struct scan_control *sc,
* proportional to the fraction of recently scanned pages on
* each list that were recently referenced and in active use.
*/
- ap = (anon_prio + 1) * (reclaim_stat->recent_scanned[0] + 1);
+ ap = anon_prio * (reclaim_stat->recent_scanned[0] + 1);
ap /= reclaim_stat->recent_rotated[0] + 1;
- fp = (file_prio + 1) * (reclaim_stat->recent_scanned[1] + 1);
+ fp = file_prio * (reclaim_stat->recent_scanned[1] + 1);
fp /= reclaim_stat->recent_rotated[1] + 1;
spin_unlock_irq(&mz->zone->lru_lock);
@@ -1777,7 +1777,7 @@ out:
unsigned long scan;
scan = zone_nr_lru_pages(mz, lru);
- if (priority || noswap) {
+ if (priority || noswap || !vmscan_swappiness(mz, sc)) {
scan >>= priority;
if (!scan && force_scan)
scan = SWAP_CLUSTER_MAX;
--
1.7.5
就像Satoru Moriya所说的那样,在之前的版本中,就算我们设置了swappiness=0并且RAM中还有pagecache,内核也可能会交换出部分匿名内存页。而为了“满足用户的需求”,这个patch修改了swappiness=0的行为,如果你设置swappiness=0,那么只有在(nr_free + nr_filebacked
在2.6.32-303.el6 RHEL/CentOS及更新版本的内核中,该patch就已经被合并进来:
* Mon Aug 27 2012 Jarod Wilson
...
- [mm] avoid swapping out with swappiness==0 (Satoru Moriya) [787885]
其他分发版本的Linux(比如Debian,Ubuntu)的版本中,请各位自己查阅一下,看看时候已经合并该patch。
RHEL/CentOS 6.3的内核版本是2.6.32-279,而RHEL/CentOS 6.4的内核为2.6.32-358,从这个版本开始,swappiness的行为就已经修改了,使用这个版本及之后版本的同志们需要特别注意一下。
解决的办法其实也很简单,
1、尽量保证Linux操作系统还有足够的内存
2、最新的内核,建议把vm.swappiness设置1
3、考虑设置 /proc/(pidof -s mysqld)/oom_adj为较小的值来尽量避免MySQL由于内存不足而被关闭。
参考:
https://github.com/torvalds/linux/blob/master/mm/vmscan.c
http://gitorious.ti.com/ti-linux-kernel/ti-linux-kernel/commit/fe35004fbf9eaf67482b074a2e032abb9c89b1dd?format=patch
http://www.mysqlperformanceblog.com/2014/04/28/oom-relation-vm-swappiness0-new-kernel/

mySqlStringTypesimpactStorageAndPerformanCeaseAsfollows:1)长度,始终使用theSamestoragespace,whatcanbefasterbutlessspace-felfficity.2)varCharisvariable varcharisvariable length,morespace-morespace-morespace-effficitybuteftife buteftife butfority butfority textifforlyslower.3)

mySqlStringTypesIncludeVarChar,文本,char,enum和set.1)varCharisVersAtileForvariable-lengthStringStringSuptOptoPeptoPepecifientlimit.2)textisidealforlargetStortStorStoverStorextorewiteWithoutAdefinedLengthl.3)charlisfixed-Length

MySQLoffersvariousstringdatatypes:1)CHARforfixed-lengthstrings,2)VARCHARforvariable-lengthtext,3)BINARYandVARBINARYforbinarydata,4)BLOBandTEXTforlargedata,and5)ENUMandSETforcontrolledinput.Eachtypehasspecificusesandperformancecharacteristics,sochoose

TograntpermissionstonewMySQLusers,followthesesteps:1)AccessMySQLasauserwithsufficientprivileges,2)CreateanewuserwiththeCREATEUSERcommand,3)UsetheGRANTcommandtospecifypermissionslikeSELECT,INSERT,UPDATE,orALLPRIVILEGESonspecificdatabasesortables,and4)

toadduserInmysqleffectection andsecrely,theTheSepsps:1)USEtheCreateuserStattoDaneWuser,指定thehostandastrongpassword.2)GrantNectalRevileSaryPrivilegesSustate,usiveleanttatement,AdheringTotheTeprinciplelastPrevilegege.3)

toaddanewuserwithcomplexpermissionsinmysql,loldtheSesteps:1)创建eTheEserWithCreateuser'newuser'newuser'@''localhost'Indedify'pa ssword';。2)GrantreadAccesstoalltablesin'mydatabase'withGrantSelectOnMyDatabase.to'newuser'@'localhost';。3)GrantWriteAccessto'

MySQL中的字符串数据类型包括CHAR、VARCHAR、BINARY、VARBINARY、BLOB、TEXT,排序规则(Collations)决定了字符串的比较和排序方式。1.CHAR适合固定长度字符串,VARCHAR适合可变长度字符串。2.BINARY和VARBINARY用于二进制数据,BLOB和TEXT用于大对象数据。3.排序规则如utf8mb4_unicode_ci忽略大小写,适合用户名;utf8mb4_bin区分大小写,适合需要精确比较的字段。

最佳的MySQLVARCHAR列长度选择应基于数据分析、考虑未来增长、评估性能影响及字符集需求。1)分析数据以确定典型长度;2)预留未来扩展空间;3)注意大长度对性能的影响;4)考虑字符集对存储的影响。通过这些步骤,可以优化数据库的效率和扩展性。


热AI工具

Undresser.AI Undress
人工智能驱动的应用程序,用于创建逼真的裸体照片

AI Clothes Remover
用于从照片中去除衣服的在线人工智能工具。

Undress AI Tool
免费脱衣服图片

Clothoff.io
AI脱衣机

Video Face Swap
使用我们完全免费的人工智能换脸工具轻松在任何视频中换脸!

热门文章

热工具

安全考试浏览器
Safe Exam Browser是一个安全的浏览器环境,用于安全地进行在线考试。该软件将任何计算机变成一个安全的工作站。它控制对任何实用工具的访问,并防止学生使用未经授权的资源。

适用于 Eclipse 的 SAP NetWeaver 服务器适配器
将Eclipse与SAP NetWeaver应用服务器集成。

VSCode Windows 64位 下载
微软推出的免费、功能强大的一款IDE编辑器

Atom编辑器mac版下载
最流行的的开源编辑器

SublimeText3 Mac版
神级代码编辑软件(SublimeText3)