搜索
首页运维linux运维深入浅出了解Linux和MacOS终端大小写敏感问题(附代码)

之前的文章《一文讲解ajax实现无刷新上传和下载(代码详解)》中,给大家了解了ajax实现无刷新上传和下载。下面本篇文章给大家了解Linux和MacOS终端大小写敏感问题,伙伴们来看看吧。

深入浅出了解Linux和MacOS终端大小写敏感问题(附代码)

Linux和MacOS终端提示大小写不敏感

打开终端,并cd到用户home目录,输入:

echo "set completion-ignore-case on" >> .inputrc

关闭再重新打开终端即可

如果你只想快速解决上面的问题,直接看第三部分即可。

inputrc 文件介绍

Bash和其它大多数shell使用Readline库作为其输入相关的库。Readline库有一些默认的键盘映射,除此之外,也可以通过修改inputrc文件来定制键盘映射。

inputrc文件时Readline库的启动文件,当使用Readline作为输入库的程序启动时,它会自动读取inputrc配置文件,初始化自定义的键盘映射。

inputrc文件的位置由shell的环境变量INPUTRC控制,如果该变量没有设置,缺省的inputrc文件的路径是~/.inputrc

如果该文件~/.inputrc不存在,就会使用系统级(对所有用户生效)的inputrc文件/etc/inputrc。如果某个用户需要修改系统默认的 inputrc配置,可以改动~/.inputrc,这样会覆盖系统的默认配置。

关于如何编辑inputrc文件的信息,运行info bash,参考bashinfo页的Readline Init File这一节,运行info readline以参考readline自己的info页。

inputrc 配置

inputrc文件中,有两种配置:一种是inputrc变量,一种是键盘映射。 注意,在配置该文件时,注释必须占单独的一行,否则可能会有问题。

inputrc变量配置

变量配置的语法如下:

set variable value

常见的变量和配置如下:

completion-ignore-case
#如果设置为开(on),在自动补全时不区分大小写。该配置默认是关。

show-all-if-ambiguous
#这个配置该变了自动补全函数的默认行为。如果设置为开(on),当自动补全的结果有一个以上时,会直接列出这些结果。如果设置为关(off),就会提示一个beep蜂鸣声,当再按下tab时才会列出自动补全的结果。默认这项配置为关。

bell-style
#Controls what happens when Readline wants to ring the terminal bell. If set to ‘none’, Readline never rings the bell. If set to ‘visible’, Readline uses a visible bell if one is available. If set to ‘audible’ (the default), Readline attempts to ring the terminal's bell.

bind-tty-special-chars
#If set to ‘on’, Readline attempts to bind the control characters treated specially by the kernel's terminal driver to their Readline equivalents.

comment-begin
#The string to insert at the beginning of the line when the insert-comment command is executed. The default value is "#".
completion-prefix-display-length

#When set to a value greater than zero, common prefixes longer than this value are replaced with an ellipsis when displaying possible completions.
#e.g. set completion-prefix-display-length 4

completion-query-items
#The number of possible completions that determines when the user is asked whether the list of possibilities should be displayed. If the number of possible completions is greater than this value, Readline will ask the user whether or not he wishes to view them; otherwise, they are simply listed. This variable must be set to an integer value greater than or equal to 0. A negative value means Readline should never ask. The default limit is 100.

convert-meta
#If set to ‘on’, Readline will convert characters with the eighth bit set to an ascii key sequence by stripping the eighth bit and prefixing an <ESC> character, converting them to a meta-prefixed key sequence. The default value is ‘on’.

disable-completion
#If set to ‘On’, Readline will inhibit word completion. Completion characters will be inserted into the line as if they had been mapped to self-insert. The default is ‘off’.

editing-mode
#The editing-mode variable controls which default set of key bindings is used. By default, Readline starts up in Emacs editing mode, where the keystrokes are most similar to Emacs. This variable can be set to either ‘emacs’ or ‘vi’.

echo-control-characters
#When set to ‘on’, on operating systems that indicate they support it, readline echoes a character corresponding to a signal generated from the keyboard. The default is ‘on’.

enable-keypad
#When set to ‘on’, Readline will try to enable the application keypad when it is called. Some systems need this to enable the arrow keys. The default is ‘off’.

enable-meta-key
#When set to ‘on’, Readline will try to enable any meta modifier key the terminal claims to support when it is called. On many terminals, the meta key is used to send eight-bit characters. The default is ‘on’.

expand-tilde
#If set to ‘on’, tilde expansion is performed when Readline attempts word completion. The default is ‘off’.

history-preserve-point
#If set to ‘on’, the history code attempts to place the point (the current cursor position) at the same location on each history line retrieved with previous-history or next-history. The default is ‘off’.

history-size
#Set the maximum number of history entries saved in the history list. If set to zero, the number of entries in the history list is not limited.

horizontal-scroll-mode
#This variable can be set to either ‘on’ or ‘off’. Setting it to ‘on’ means that the text of the lines being edited will scroll horizontally on a single screen line when they are longer than the width of the screen, instead of wrapping onto a new screen line. By default, this variable is set to ‘off’.

input-meta
#If set to ‘on’, Readline will enable eight-bit input (it will not clear the eighth bit in the characters it reads), regardless of what the terminal claims it can support. The default value is ‘off’. The name meta-flag is a synonym for this variable.

isearch-terminators
#The string of characters that should terminate an incremental search without subsequently executing the character as a command. If this variable has not been given a value, the characters <ESC> and C-J will terminate an incremental search.

keymap
#Sets Readline&#39;s idea of the current keymap for key binding commands. Acceptable keymap names are emacs, emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move, vi-command, and vi-insert. vi is equivalent to vi-command; emacs is equivalent to emacs-standard. The default value is emacs. The value of the editing-mode variable also affects the default keymap.

mark-directories
#If set to ‘on’, completed directory names have a slash appended. The default is ‘on’.

mark-modified-lines
#This variable, when set to ‘on’, causes Readline to display an asterisk (*) at the start of history lines which have been modified. This variable is ‘off’ by default.

mark-symlinked-directories
#If set to ‘on’, completed names which are symbolic links to directories have a slash appended (subject to the value of mark-directories). The default is ‘off’.

match-hidden-files
#This variable, when set to ‘on’, causes Readline to match files whose names begin with a ‘.’ (hidden files) when performing filename completion, unless the leading ‘.’ is supplied by the user in the filename to be completed. This variable is ‘on’ by default.

output-meta
#If set to ‘on’, Readline will display characters with the eighth bit set directly rather than as a meta-prefixed escape sequence. The default is ‘off’.

page-completions
#If set to ‘on’, Readline uses an internal more-like pager to display a screenful of possible completions at a time. This variable is ‘on’ by default.

print-completions-horizontally
#If set to ‘on’, Readline will display completions with matches sorted horizontally in alphabetical order, rather than down the screen. The default is ‘off’.

revert-all-at-newline
If set to ‘on’, Readline will undo all changes to history lines before returning when accept-line is executed. By default, history lines can be modified and retain individual undo lists across calls to readline. The default is ‘off’.

show-all-if-unmodified
#This alters the default behavior of the completion functions in a fashion similar to show-all-if-ambiguous. If set to ‘on’, words which have more than one possible completion without any possible partial completion (the possible completions don&#39;t share a common prefix) cause the matches to be listed immediately instead of ringing the bell. The default value is ‘off’.

skip-completed-text
#If set to ‘on’, this alters the default completion behavior when inserting a single match into the line. It&#39;s only active when performing completion in the middle of a word. If enabled, readline does not insert characters from the completion that match characters after point in the word being completed, so portions of the word following the cursor are not duplicated. For instance, if this is enabled, attempting completion when the cursor is after the ‘e’ in ‘Makefile’ will result in ‘Makefile’ rather than ‘Makefilefile’, assuming there is a single possible completion. The default value is ‘off’.

visible-stats
#If set to ‘on’, a character denoting a file&#39;s type is appended to the filename when listing possible completions. The default is ‘off’.

键盘映射配置

配置inputrc变量的语法如下:

keyname: function-name or macro

#keyname必须是英文,可以是Control-u、Control-k等。并且keyname和冒号之间不能有空格,如果有空格会被认为是keyname的一部分。keyname的写法多样,取决于自己的喜好。
#下面是一些键盘映射配置的例子:

Control-u: universal-argument C-u is bound to the function universal-argument

Meta-Rubout: backward-kill-word M-DEL is bound to the function backward-kill-word

Control-o: "> output" C-o is bound to run the macro expressed on the right hand side (that is, to insert the text ‘> output’ into the line)

Control-j: menu-complete C-j is bound to cycle through the available tab completions.

Control-k: menu-complete-backward C-k is bound to cycle backwards through the available tab completions.

"\t": menu-complete Use tab to cycle through all the possible completions.

"\C-p": history-search-backward Map control-p to allow search for completions to the current line from your history. e.g. type “git” and then hit control-p to cycle through all the recent git commands.

"\ep": history-search-backward Map escape-p to allow search for completions to the current line from your history. e.g. type “git” and then hit escape-p to cycle through all the recent git commands.

"\e[A": history-search-backward Map Up arrow to allow search for completions to the current line from your history. e.g. type “git” and then hit UP to cycle through all the recent git commands.

"\e[B": history-search-forward Map Down arrow to allow search for completions to the current line from your history. e.g. type “git” and then hit DOWN to cycle back through all the recent git commands.

"\C-d": kill-whole-line Map control-d to kill the whole line.

设置MacOS下自动补全不区分大小写

通过上面的介绍,解决这个问题应该是绰绰有余了。打开用户主目录下的文件~/.inputrc(如果没有的话,就新建该文件),在其中添加如下配置:

# 设置自动补全不区分大小写
set completion-ignore-case on
# 当有一个以上自动补全结果时,直接列出,不用beep提示
set show-all-if-ambiguous on

保存该文件,然后,重启命令行,就会发现自动补全不区分大小写已经生效了。 网上好多结果中,还需要多加一个下面的配置:

TAB: menu-complete

这个配置的目的是,在列出自动补全的结果之后,再按一次tab键,就会自动在自动补全列表中选择,而不是一直展示自动补全列表。

推荐学习:Mac OS入门教程Linux视频教程

以上是深入浅出了解Linux和MacOS终端大小写敏感问题(附代码)的详细内容。更多信息请关注PHP中文网其他相关文章!

声明
本文转载于:禅境花园。如有侵权,请联系admin@php.cn删除
Linux操作:网络和网络配置Linux操作:网络和网络配置Apr 27, 2025 am 12:09 AM

Linux网络配置可以通过以下步骤完成:1.配置网络接口,使用ip命令临时设置或编辑配置文件持久化设置。2.设置静态IP,适合需要固定IP的设备。3.管理防火墙,使用iptables或firewalld工具来控制网络流量。

Linux中的维护模式:系统管理员指南Linux中的维护模式:系统管理员指南Apr 26, 2025 am 12:20 AM

维护模式在Linux系统管理中扮演关键角色,帮助进行系统修复、升级和配置变更。1.进入维护模式可以通过GRUB菜单选择或使用命令“sudosystemctlisolaterescue.target”。2.在维护模式下,可以执行文件系统修复和系统更新等操作。3.高级用法包括重置root密码等任务。4.常见错误如无法进入维护模式或挂载文件系统,可通过检查GRUB配置和使用fsck命令修复。

Linux中的维护模式:何时以及为什么使用它Linux中的维护模式:何时以及为什么使用它Apr 25, 2025 am 12:15 AM

使用Linux维护模式的时机和原因:1)系统启动问题时,2)进行重大系统更新或升级时,3)执行文件系统维护时。维护模式提供安全、控制的环境,确保操作的安全性和效率,减少对用户的影响,并增强系统的安全性。

Linux:基本命令和操作Linux:基本命令和操作Apr 24, 2025 am 12:20 AM

Linux中不可或缺的命令包括:1.ls:列出目录内容;2.cd:改变工作目录;3.mkdir:创建新目录;4.rm:删除文件或目录;5.cp:复制文件或目录;6.mv:移动或重命名文件或目录。这些命令通过与内核交互执行操作,帮助用户高效管理文件和系统。

Linux操作:管理文件,目录和权限Linux操作:管理文件,目录和权限Apr 23, 2025 am 12:19 AM

在Linux中,文件和目录管理使用ls、cd、mkdir、rm、cp、mv命令,权限管理使用chmod、chown、chgrp命令。1.文件和目录管理命令如ls-l列出详细信息,mkdir-p递归创建目录。2.权限管理命令如chmod755file设置文件权限,chownuserfile改变文件所有者,chgrpgroupfile改变文件所属组。这些命令基于文件系统结构和用户、组系统,通过系统调用和元数据实现操作和控制。

Linux中的维护模式是什么?解释了Linux中的维护模式是什么?解释了Apr 22, 2025 am 12:06 AM

MaintenancemodeInuxisAspecialBootenvironmentforforcalsystemmaintenancetasks.itallowsadMinistratorStoperFormTaskSlikerSettingPassingPassingPasswords,RepairingFilesystems,andRecoveringFrombootFailuresFailuresFailuresInamInimAlenimalenimalenrenmentrent.ToEnterMainterMainterMaintErmaintErmaintEncemememodeBoode,Interlecttheboo

Linux:深入研究其基本部分Linux:深入研究其基本部分Apr 21, 2025 am 12:03 AM

Linux的核心组件包括内核、文件系统、Shell、用户空间与内核空间、设备驱动程序以及性能优化和最佳实践。1)内核是系统的核心,管理硬件、内存和进程。2)文件系统组织数据,支持多种类型如ext4、Btrfs和XFS。3)Shell是用户与系统交互的命令中心,支持脚本编写。4)用户空间与内核空间分离,确保系统稳定性。5)设备驱动程序连接硬件与操作系统。6)性能优化包括调整系统配置和遵循最佳实践。

Linux体系结构:揭示5个基本组件Linux体系结构:揭示5个基本组件Apr 20, 2025 am 12:04 AM

Linux系统的五个基本组件是:1.内核,2.系统库,3.系统实用程序,4.图形用户界面,5.应用程序。内核管理硬件资源,系统库提供预编译函数,系统实用程序用于系统管理,GUI提供可视化交互,应用程序利用这些组件实现功能。

See all articles

热AI工具

Undresser.AI Undress

Undresser.AI Undress

人工智能驱动的应用程序,用于创建逼真的裸体照片

AI Clothes Remover

AI Clothes Remover

用于从照片中去除衣服的在线人工智能工具。

Undress AI Tool

Undress AI Tool

免费脱衣服图片

Clothoff.io

Clothoff.io

AI脱衣机

Video Face Swap

Video Face Swap

使用我们完全免费的人工智能换脸工具轻松在任何视频中换脸!

热工具

Atom编辑器mac版下载

Atom编辑器mac版下载

最流行的的开源编辑器

Dreamweaver CS6

Dreamweaver CS6

视觉化网页开发工具

EditPlus 中文破解版

EditPlus 中文破解版

体积小,语法高亮,不支持代码提示功能

Dreamweaver Mac版

Dreamweaver Mac版

视觉化网页开发工具

SublimeText3 英文版

SublimeText3 英文版

推荐:为Win版本,支持代码提示!