搜索
首页后端开发php教程服务器搭建2
服务器搭建2
WBOYWBOYWBOYWBOYWBOYWBOYWBOYWBOYWBOYWBOYWBOYWBOYWB
WBOYWBOYWBOYWBOYWBOYWBOYWBOYWBOYWBOYWBOYWBOYWBOYWB
Aug 08, 2016 am 09:18 AM
nginxpcrerootzlib

<code><span>1.</span>将nginx安装包拷贝到/opt/nginx目录下,修改权限,解压缩,同时编译安装.
root@iZ25n0utdnmZ:/opt/nginx<span># chmod 777 nginx-1.9.3.tar.gz </span>
root@iZ25n0utdnmZ:/opt/nginx<span># ls -l</span>
total <span>848</span>
-rwxrwxrwx <span>1</span> root root <span>864430</span> Aug  <span>3</span><span>18</span>:<span>37</span> nginx-<span>1.9</span><span>.3</span>.tar.gz
root@iZ25n0utdnmZ:/opt/nginx<span># tar -zxvf nginx-1.9.3.tar.gz </span>
root@iZ25n0utdnmZ:/opt/nginx/nginx-<span>1.9</span><span>.3</span><span># ./configure</span>
......(很多输出)......
checking <span>for</span> PCRE <span>library</span><span>in</span> /usr/include/pcre/ <span>...</span> not found
checking <span>for</span> PCRE <span>library</span><span>in</span> /usr/pkg/ <span>...</span> not found
checking <span>for</span> PCRE <span>library</span><span>in</span> /opt/local/ <span>...</span> not found

./configure: error: the HTTP rewrite module requires the PCRE library.
You can either disable the module by using --without-http_rewrite_module
option, or install the PCRE <span>library</span> into the system, or build the PCRE <span>library</span>
statically from the <span>source</span> with nginx by using --with-pcre=<path> option.
提示缺少pcre,下载pcre并拷贝到/opt/pcre目录下,修改权限,解压缩,同时编译安装,
root@iZ25n0utdnmZ:/opt/pcre<span># chmod 777 pcre-8.37.tar.gz </span>
root@iZ25n0utdnmZ:/opt/pcre<span># ls -l</span>
total <span>1996</span>
-rwxrwxrwx <span>1</span> root root <span>2041593</span> Aug  <span>5</span><span>18</span>:<span>31</span> pcre-<span>8.37</span>.tar.gz
root@iZ25n0utdnmZ:/opt/pcre<span># tar -zxvf pcre-8.37.tar.gz </span>
root@iZ25n0utdnmZ:/opt/pcre/pcre-<span>8.37</span><span># ./configure</span>
root@iZ25n0utdnmZ:/opt/pcre/pcre-<span>8.37</span><span># make</span>
root@iZ25n0utdnmZ:/opt/pcre/pcre-<span>8.37</span><span># make install</span>
安装完pcre后,继续安装nginx.
root@iZ25n0utdnmZ:/opt/nginx/nginx-<span>1.9</span><span>.3</span><span># ./configure</span>
......(很多输出)......
checking <span>for</span> sha1 <span>in</span> system md <span>library</span><span>...</span> not found
checking <span>for</span> sha1 <span>in</span> system OpenSSL crypto <span>library</span><span>...</span> not found
checking <span>for</span> zlib <span>library</span><span>...</span> not found

./configure: error: the HTTP gzip module requires the zlib library.
You can either disable the module by using --without-http_gzip_module
option, or install the zlib <span>library</span> into the system, or build the zlib <span>library</span>
statically from the <span>source</span> with nginx by using --with-zlib=<path> option.
提示缺少zlib,下载zlib并拷贝到/zlib/zlib目录下,修改权限,解压缩,同时编译安装,
root@iZ25n0utdnmZ:/opt/zlib<span># chmod 777 zlib-1.2.8.tar.gz </span>
root@iZ25n0utdnmZ:/opt/zlib<span># ls -l</span>
total <span>560</span>
-rwxrwxrwx <span>1</span> root root <span>571091</span> Aug  <span>5</span><span>18</span>:<span>39</span> zlib-<span>1.2</span><span>.8</span>.tar.gz
root@iZ25n0utdnmZ:/opt/zlib<span># tar -zxvf zlib-1.2.8.tar.gz </span>
root@iZ25n0utdnmZ:/opt/zlib/zlib-<span>1.2</span><span>.8</span><span># ./configure</span>
root@iZ25n0utdnmZ:/opt/zlib/zlib-<span>1.2</span><span>.8</span><span># make </span>
root@iZ25n0utdnmZ:/opt/zlib/zlib-<span>1.2</span><span>.8</span><span># make install</span>
安装完zlib后,继续安装nginx.
root@iZ25n0utdnmZ:/opt/nginx/nginx-<span>1.9</span><span>.3</span><span># ./configure</span>
Configuration summary
  + using system PCRE <span>library</span>
  + OpenSSL <span>library</span> is not used
  + using builtin md5 code
  + sha1 <span>library</span> is not found
  + using system zlib <span>library</span>  nginx path prefix: <span>"/usr/local/nginx"</span>
  nginx binary file: <span>"/usr/local/nginx/sbin/nginx"</span>
  nginx configuration prefix: <span>"/usr/local/nginx/conf"</span>
  nginx configuration file: <span>"/usr/local/nginx/conf/nginx.conf"</span>
  nginx pid file: <span>"/usr/local/nginx/logs/nginx.pid"</span>
  nginx error log file: <span>"/usr/local/nginx/logs/error.log"</span>
  nginx http access log file: <span>"/usr/local/nginx/logs/access.log"</span>
  nginx http client request body temporary files: <span>"client_body_temp"</span>
  nginx http proxy temporary files: <span>"proxy_temp"</span>
  nginx http fastcgi temporary files: <span>"fastcgi_temp"</span>
  nginx http uwsgi temporary files: <span>"uwsgi_temp"</span>
  nginx http scgi temporary files: <span>"scgi_temp"</span>
root@iZ25n0utdnmZ:/opt/nginx/nginx-<span>1.9</span><span>.3</span><span># make</span>
root@iZ25n0utdnmZ:/opt/nginx/nginx-<span>1.9</span><span>.3</span><span># make install</span>
注意:ginx默认是在安在/usr/local/nginx下.


<span>2.</span>启动,重启和停止nginx.
root@iZ25n0utdnmZ:/usr/local/nginx/sbin<span># ./nginx </span>
root@iZ25n0utdnmZ:/usr/local/nginx/sbin<span># ./nginx -s reload</span>
root@iZ25n0utdnmZ:/usr/local/nginx/sbin<span># ./nginx -s stop</span><span>3.</span>nginx和tomcat集成配置.
打开nginx的配置文件nginx.conf,在其中加入如下配置:参考配置<span>1.</span>conf.
location ~ \.mvc {
    proxy_pass http://<span>101.201</span><span>.89</span><span>.5</span>:<span>8080</span>;
}
其中重要的配置如下:
server {
    listen       <span>80</span>;
    server_name  localhost;

    location ~ \.mvc {
        proxy_pass http://<span>101.201</span><span>.89</span><span>.5</span>:<span>8080</span>;
    }
}
这段配置的意思是:服务器监听<span>80</span>端口,当有以.mvc结尾的请求时,服务器将请求交给代理处理.其余配置先不做详细介绍.
注意可以使用nginx -t指令校验配置文件配置的是否正确.
root@iZ25n0utdnmZ:/usr/local/nginx/sbin<span># ./nginx -t</span>
nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful


<span>4.</span>nginx和tomcat负载均衡配置.
打开nginx的配置文件nginx.conf,在其中加入如下配置:参考配置<span>2.</span>conf.
upstream myserver {
    server <span>101.201</span><span>.89</span><span>.5</span>:<span>8080</span> weight=<span>1</span>;
        server <span>101.201</span><span>.89</span><span>.5</span>:<span>8081</span> weight=<span>1</span>;
}

server {
    listen       <span>80</span>;
    server_name  localhost;

    location ~ \.mvc {
        proxy_pass http://myserver;
    }
}
这段配置的意思是:服务器监听<span>80</span>端口,当有以.mvc结尾的请求时,服务器将请求交给代理处理,而代理指向的是一个服务器列表,通过upstream配置,
通过名字myserver匹配,在服务器列表中有两个服务器,端口分别是<span>8080</span>,<span>8081</span>,权重都是<span>1</span>,即nginx会将发过来的请求按<span>1</span>:<span>1</span>的比例交给两个服务器处理,
注意:如果某个服务器瘫痪了或者根本不存在,也不会影响业务,另一个服务器会处理所有请求.
另一个tomcat的server.xml文件配置需要修改的地方如下:
将<span>8005</span>改为<span>8006</span>:<server port="<span">"8006" shutdown=<span>"SHUTDOWN"</span>>
将<span>8080</span>改为<span>8081</span>:<connector port="<span">"8081" protocol=<span>"HTTP/1.1"</span> c>"20000" redirectPort=<span>"8443"</span> />
将<span>8009</span>改为<span>8010</span>:<connector port="<span">"8010" protocol=<span>"AJP/1.3"</span> redirectPort=<span>"8443"</span> /> 
如果两个服务都正常运行,可以通过记录log测试两个服务分别处理了不同的请求,如下:
log4j.appender.file.File=/log/tomcat1/aplay-web.log
log4j.appender.file.File=/log/tomcat2/aplay-web.log





</connector></connector></server></path></path></code>

版权声明：本文为博主原创文章，未经博主允许不得转载。

以上就介绍了服务器搭建2，包括了方面的内容，希望对PHP教程有兴趣的朋友有所帮助。

声明
本文内容由网友自发贡献，版权归原作者所有，本站不承担相应法律责任。如您发现有涉嫌抄袭侵权的内容，请联系admin@php.cn
相关文章
内存飙升！记一次nginx拦截爬虫内存飙升！记一次nginx拦截爬虫Mar 30, 2023 pm 04:35 PM

本篇文章给大家带来了关于nginx的相关知识，其中主要介绍了nginx拦截爬虫相关的，感兴趣的朋友下面一起来看一下吧，希望对大家有帮助。

nginx限流模块源码分析nginx限流模块源码分析May 11, 2023 pm 06:16 PM

高并发系统有三把利器：缓存、降级和限流；限流的目的是通过对并发访问/请求进行限速来保护系统，一旦达到限制速率则可以拒绝服务（定向到错误页）、排队等待（秒杀）、降级（返回兜底数据或默认数据）；高并发系统常见的限流有：限制总并发数（数据库连接池）、限制瞬时并发数（如nginx的limit_conn模块，用来限制瞬时并发连接数）、限制时间窗口内的平均速率（nginx的limit_req模块，用来限制每秒的平均速率）；另外还可以根据网络连接数、网络流量、cpu或内存负载等来限流。1.限流算法最简单粗暴的

nginx+rsync+inotify怎么配置实现负载均衡nginx+rsync+inotify怎么配置实现负载均衡May 11, 2023 pm 03:37 PM

实验环境前端nginx：ip192.168.6.242，对后端的wordpress网站做反向代理实现复杂均衡后端nginx：ip192.168.6.36，192.168.6.205都部署wordpress，并使用相同的数据库1、在后端的两个wordpress上配置rsync+inotify，两服务器都开启rsync服务，并且通过inotify分别向对方同步数据下面配置192.168.6.205这台服务器vim/etc/rsyncd.confuid=nginxgid=nginxport=873ho

nginx php403错误怎么解决nginx php403错误怎么解决Nov 23, 2022 am 09:59 AM

nginx php403错误的解决办法：1、修改文件权限或开启selinux；2、修改php-fpm.conf，加入需要的文件扩展名；3、修改php.ini内容为“cgi.fix_pathinfo = 0”；4、重启php-fpm即可。

如何解决跨域？常见解决方案浅析如何解决跨域？常见解决方案浅析Apr 25, 2023 pm 07:57 PM

跨域是开发中经常会遇到的一个场景，也是面试中经常会讨论的一个问题。掌握常见的跨域解决方案及其背后的原理，不仅可以提高我们的开发效率，还能在面试中表现的更加

nginx部署react刷新404怎么办nginx部署react刷新404怎么办Jan 03, 2023 pm 01:41 PM

nginx部署react刷新404的解决办法：1、修改Nginx配置为“server {listen 80;server_name https://www.xxx.com;location / {root xxx;index index.html index.htm;...}”；2、刷新路由，按当前路径去nginx加载页面即可。

Linux系统下如何为Nginx安装多版本PHPLinux系统下如何为Nginx安装多版本PHPMay 11, 2023 pm 07:34 PM

linux版本：64位centos6.4nginx版本：nginx1.8.0php版本：php5.5.28&php5.4.44注意假如php5.5是主版本已经安装在/usr/local/php目录下，那么再安装其他版本的php再指定不同安装目录即可。安装php#wgethttp://cn2.php.net/get/php-5.4.44.tar.gz/from/this/mirror#tarzxvfphp-5.4.44.tar.gz#cdphp-5.4.44#./configure--pr

nginx怎么禁止访问phpnginx怎么禁止访问phpNov 22, 2022 am 09:52 AM

nginx禁止访问php的方法：1、配置nginx，禁止解析指定目录下的指定程序；2、将“location ~^/images/.*\.(php|php5|sh|pl|py)${deny all...}”语句放置在server标签内即可。

See all articles

热AI工具

Undresser.AI Undress

Undresser.AI Undress

人工智能驱动的应用程序，用于创建逼真的裸体照片

AI Clothes Remover

AI Clothes Remover

用于从照片中去除衣服的在线人工智能工具。

Undress AI Tool

Undress AI Tool

免费脱衣服图片

Clothoff.io

Clothoff.io

AI脱衣机

AI Hentai Generator

AI Hentai Generator

免费生成ai无尽的。

显示更多

热门文章

R.E.P.O.能量晶体解释及其做什么（黄色晶体）
3 周前By尊渡假赌尊渡假赌尊渡假赌
R.E.P.O.最佳图形设置
3 周前By尊渡假赌尊渡假赌尊渡假赌
刺客信条阴影：贝壳谜语解决方案
1 周前ByDDD
R.E.P.O.如果您听不到任何人，如何修复音频
3 周前By尊渡假赌尊渡假赌尊渡假赌
在哪里可以找到原子中的起重机控制钥匙卡
1 周前ByDDD
显示更多

热工具

Dreamweaver CS6

Dreamweaver CS6

视觉化网页开发工具

记事本++7.3.1

记事本++7.3.1

好用且免费的代码编辑器

安全考试浏览器

安全考试浏览器

Safe Exam Browser是一个安全的浏览器环境，用于安全地进行在线考试。该软件将任何计算机变成一个安全的工作站。它控制对任何实用工具的访问，并防止学生使用未经授权的资源。

SublimeText3 英文版

SublimeText3 英文版

推荐：为Win版本，支持代码提示！

ZendStudio 13.5.1 Mac

ZendStudio 13.5.1 Mac

功能强大的PHP集成开发环境

显示更多

热门话题

gmail邮箱登陆入口在哪里
7425
15
CakePHP 教程
1359
52
steam的账户名称是什么格式
76
11
win11激活密钥永久
27
19
显示更多