很多朋友会经常用到oracle 11g RAC的命令,今天我也用到了,同时也整理了一些常用的命令,以备不时之需
1)、检查集群状态:[grid@rac02 ~]$ crsctl check cluster
CRS-4537: Cluster Ready Services is online
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online
2)、所有 Oracle 实例 —(数据库状态):
[grid@rac02 ~]$ srvctl status database -d racdb
Instance racdb1 is running on node rac01
Instance racdb2 is running on node rac02
3)、检查单个实例状态:
[grid@rac02 ~]$ srvctl status instance -d racdb -i racdb1
Instance racdb1 is running on node rac01
4)、节点应用程序状态:
[grid@rac02 ~]$ srvctl status nodeapps
VIP rac01-vip is enabled
VIP rac01-vip is running on node: rac01
VIP rac02-vip is enabled
VIP rac02-vip is running on node: rac02
Network is enabled
Network is running on node: rac01
Network is running on node: rac02
GSD is disabled
GSD is not running on node: rac01
GSD is not running on node: rac02
ONS is enabled
ONS daemon is running on node: rac01
ONS daemon is running on node: rac02
eONS is enabled
eONS daemon is running on node: rac01
eONS daemon is running on node: rac02
5)、列出所有的配置数据库:
[grid@rac02 ~]$ srvctl config database
racdb
6)、数据库配置:
[grid@rac02 ~]$ srvctl config database -d racdb -a
Database unique name: racdb
Database name: racdb
Oracle home: /u01/app/oracle/product/11.2.0/dbhome_1
Oracle user: oracle
Spfile: +RACDB_DATA/racdb/spfileracdb.ora
Domain: xzxj.edu.cn
Start options: open
Stop options: immediate
Database role: PRIMARY
Management policy: AUTOMATIC
Server pools: racdb
Database instances: racdb1,racdb2
Disk Groups: RACDB_DATA,FRA
Services:
Database is enabled
Database is administrator managed
7)、ASM状态以及ASM配置:
[grid@rac02 ~]$ srvctl status asm
ASM is running on rac01,rac02
[grid@rac02 ~]$ srvctl config asm -a
ASM home: /u01/app/11.2.0/grid
ASM listener: LISTENER
ASM is enabled.
8)、TNS监听器状态以及配置:
[grid@rac02 ~]$ srvctl status listener
Listener LISTENER is enabled
Listener LISTENER is running on node(s): rac01,rac02
[grid@rac02 ~]$ srvctl config listener -a
Name: LISTENER
Network: 1, Owner: grid
Home:
/u01/app/11.2.0/grid on node(s) rac02,rac01
End points: TCP:1521
9)、SCAN状态以及配置:
[grid@rac02 ~]$ srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is running on node rac02
[grid@rac02 ~]$ srvctl config scan
SCAN name: rac-scan.xzxj.edu.cn, Network: 1/192.168.1.0/255.255.255.0/eth0
SCAN VIP name: scan1, IP: /rac-scan.xzxj.edu.cn/192.168.1.55
10)、VIP各个节点的状态以及配置:
[grid@rac02 ~]$ srvctl status vip -n rac01
VIP rac01-vip is enabled
VIP rac01-vip is running on node: rac01
[grid@rac02 ~]$ srvctl status vip -n rac02
VIP rac02-vip is enabled
VIP rac02-vip is running on node: rac02
[grid@rac02 ~]$ srvctl config vip -n rac01
VIP exists.:rac01
VIP exists.: /rac01-vip/192.168.1.53/255.255.255.0/eth0
[grid@rac02 ~]$ srvctl config vip -n rac02
VIP exists.:rac02
VIP exists.: /rac02-vip/192.168.1.54/255.255.255.0/eth0
11)、节点应用程序配置 —(VIP、GSD、ONS、监听器)
[grid@rac02 ~]$ srvctl config nodeapps -a -g -s -l
-l option has been deprecated and will be ignored.
VIP exists.:rac01
VIP exists.: /rac01-vip/192.168.1.53/255.255.255.0/eth0
VIP exists.:rac02
VIP exists.: /rac02-vip/192.168.1.54/255.255.255.0/eth0
GSD exists.
ONS daemon exists. Local port 6100, remote port 6200
Name: LISTENER
Network: 1, Owner: grid
Home:
/u01/app/11.2.0/grid on node(s) rac02,rac01
End points: TCP:1521
12)、验证所有集群节点间的时钟同步:
[grid@rac02 ~]$ cluvfy comp clocksync -verbose
Verifying Clock Synchronization across the cluster nodes
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
Check: CTSS Resource running on all nodes
Node Name Status
------------------------------------ ------------------------
rac02 passed
Result: CTSS resource check passed
Querying CTSS for time offset on all nodes...
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name State
------------------------------------ ------------------------
rac02 Active
CTSS is in Active state. Proceeding with check of clock time offsets on all nodes...
Reference Time Offset Limit: 1000.0 msecs
Check: Reference Time Offset
Node Name Time Offset Status
------------ ------------------------ ------------------------
rac02 0.0 passed
Time offset is within the specified limits on the following set of nodes:
"[rac02]"
Result: Check of clock time offsets passed
Oracle Cluster Time Synchronization Services check passed
Verification of Clock Synchronization across the cluster nodes was successful.
13)、集群中所有正在运行的实例 — (SQL):
SELECT inst_id , instance_number inst_no , instance_name inst_name , parallel , status ,
database_status db_status , active_state state , host_name host FROM gv$instance ORDER BY inst_id;
14)、所有数据库文件及它们所在的 ASM 磁盘组 — (SQL):
15)、ASM 磁盘卷:
16)、启动和停止集群:
以下操作需用root用户执行。
(1)、在本地服务器上停止Oracle Clusterware 系统:
[root@rac01 ~]# /u01/app/11.2.0/grid/bin/crsctl stop cluster
注:在运行“crsctl stop cluster”命令之后,如果 Oracle Clusterware 管理的
资源中有任何一个还在运行,则整个命令失败。使用 -f 选项无条件地停止所有资源并
停止 Oracle Clusterware 系统。
另请注意,可通过指定 -all 选项在集群中所有服务器上停止 Oracle Clusterware
系统。如下所示,在rac01和rac02上停止oracle clusterware系统:
[root@rac02 ~]# /u01/app/11.2.0/grid/bin/crsctl stop cluster –all
在本地服务器上启动oralce clusterware系统:
[root@rac01 ~]# /u01/app/11.2.0/grid/bin/crsctl start cluster
注:可通过指定 -all 选项在集群中所有服务器上启动 Oracle Clusterware 系统。
[root@rac02 ~]# /u01/app/11.2.0/grid/bin/crsctl start cluster –all
还可以通过列出服务器(各服务器之间以空格分隔)在集群中一个或多个指定的
服务器上启动 Oracle Clusterware 系统:
[root@rac01 ~]# /u01/app/11.2.0/grid/bin/crsctl start cluster -n rac01 rac02
使用 SRVCTL 启动/停止所有实例:
[oracle@rac01 ~]#srvctl stop database -d racdb
[oracle@rac01 ~]#srvctl start database -d racdb

MySQL使用的是GPL许可证。1)GPL许可证允许自由使用、修改和分发MySQL,但修改后的分发需遵循GPL。2)商业许可证可避免公开修改,适合需要保密的商业应用。

选择InnoDB而不是MyISAM的情况包括:1)需要事务支持,2)高并发环境,3)需要高数据一致性;反之,选择MyISAM的情况包括:1)主要是读操作,2)不需要事务支持。InnoDB适合需要高数据一致性和事务处理的应用,如电商平台,而MyISAM适合读密集型且无需事务的应用,如博客系统。

在MySQL中,外键的作用是建立表与表之间的关系,确保数据的一致性和完整性。外键通过引用完整性检查和级联操作维护数据的有效性,使用时需注意性能优化和避免常见错误。

MySQL中有四种主要的索引类型:B-Tree索引、哈希索引、全文索引和空间索引。1.B-Tree索引适用于范围查询、排序和分组,适合在employees表的name列上创建。2.哈希索引适用于等值查询,适合在MEMORY存储引擎的hash_table表的id列上创建。3.全文索引用于文本搜索,适合在articles表的content列上创建。4.空间索引用于地理空间查询,适合在locations表的geom列上创建。

toCreateAnIndexinMysql,usethecReateIndexStatement.1)forasingLecolumn,使用“ createIndexIdx_lastNameEnemployees(lastName); 2)foracompositeIndex,使用“ createIndexIndexIndexIndexIndexDx_nameOmplayees(lastName,firstName,firstName);” 3)forauniqe instex,creationexexexexex,

MySQL和SQLite的主要区别在于设计理念和使用场景:1.MySQL适用于大型应用和企业级解决方案,支持高性能和高并发;2.SQLite适合移动应用和桌面软件,轻量级且易于嵌入。

MySQL中的索引是数据库表中一列或多列的有序结构,用于加速数据检索。1)索引通过减少扫描数据量提升查询速度。2)B-Tree索引利用平衡树结构,适合范围查询和排序。3)创建索引使用CREATEINDEX语句,如CREATEINDEXidx_customer_idONorders(customer_id)。4)复合索引可优化多列查询,如CREATEINDEXidx_customer_orderONorders(customer_id,order_date)。5)使用EXPLAIN分析查询计划,避

在MySQL中使用事务可以确保数据一致性。1)通过STARTTRANSACTION开始事务,执行SQL操作后用COMMIT提交或ROLLBACK回滚。2)使用SAVEPOINT可以设置保存点,允许部分回滚。3)性能优化建议包括缩短事务时间、避免大规模查询和合理使用隔离级别。


热AI工具

Undresser.AI Undress
人工智能驱动的应用程序,用于创建逼真的裸体照片

AI Clothes Remover
用于从照片中去除衣服的在线人工智能工具。

Undress AI Tool
免费脱衣服图片

Clothoff.io
AI脱衣机

Video Face Swap
使用我们完全免费的人工智能换脸工具轻松在任何视频中换脸!

热门文章

热工具

SublimeText3 Mac版
神级代码编辑软件(SublimeText3)

mPDF
mPDF是一个PHP库,可以从UTF-8编码的HTML生成PDF文件。原作者Ian Back编写mPDF以从他的网站上“即时”输出PDF文件,并处理不同的语言。与原始脚本如HTML2FPDF相比,它的速度较慢,并且在使用Unicode字体时生成的文件较大,但支持CSS样式等,并进行了大量增强。支持几乎所有语言,包括RTL(阿拉伯语和希伯来语)和CJK(中日韩)。支持嵌套的块级元素(如P、DIV),

适用于 Eclipse 的 SAP NetWeaver 服务器适配器
将Eclipse与SAP NetWeaver应用服务器集成。

SublimeText3 Linux新版
SublimeText3 Linux最新版

EditPlus 中文破解版
体积小,语法高亮,不支持代码提示功能