如果採用RPM套件安裝,安裝路徑應在 /etc/httpd目錄下。
(學習教學建議:apache)
apache設定檔:/etc/httpd/conf/httpd.conf 可以修改相關的存取路徑及設定
Apache模組路徑:/usr/sbin/apachectl 啟動模組
web目錄:/var/www/html 專案的儲存路徑
如果採用原始程式碼安裝,一般預設安裝在/usr/local/apache2目錄下。
啟動apache報錯訊息,很大程度要檢查是不是連接埠被佔用了,因為預設apache啟動的是80埠。像nginx預設頁是開啟80埠。
報錯訊息如下:
[root@localhost ~]# service httpd restart Redirecting to /bin/systemctl restart httpd.service Job for httpd.service failed because the control process exited with error code. See "systemctl status httpd.service" and "journalctl -xe" for details. [root@localhost ~]# service httpd status Redirecting to /bin/systemctl status httpd.service ● httpd.service - The Apache HTTP Server Loaded: loaded (/usr/lib/systemd/system/httpd.service; disabled; vendor preset: disabled) Active: failed (Result: exit-code) since 三 2018-12-05 14:42:42 CST; 11s ago Docs: man:httpd(8) man:apachectl(8) Process: 3640 ExecStop=/bin/kill -WINCH ${MAINPID} (code=exited, status=1/FAILURE) Process: 3639 ExecStart=/usr/sbin/httpd $OPTIONS -DFOREGROUND (code=exited, status=1/FAILURE) Main PID: 3639 (code=exited, status=1/FAILURE) 12月 05 14:42:42 localhost.localdomain httpd[3639]: (98)Address already in use: AH00072: make_sock: could not bind to address [::]:80 12月 05 14:42:42 localhost.localdomain httpd[3639]: (98)Address already in use: AH00072: make_sock: could not bind to address 0.0.0.0:80 12月 05 14:42:42 localhost.localdomain httpd[3639]: no listening sockets available, shutting down 12月 05 14:42:42 localhost.localdomain httpd[3639]: AH00015: Unable to open logs 12月 05 14:42:42 localhost.localdomain systemd[1]: httpd.service: main process exited, code=exited, status=1/FAILURE 12月 05 14:42:42 localhost.localdomain kill[3640]: kill: cannot find process "" 12月 05 14:42:42 localhost.localdomain systemd[1]: httpd.service: control process exited, code=exited status=1 12月 05 14:42:42 localhost.localdomain systemd[1]: Failed to start The Apache HTTP Server. 12月 05 14:42:42 localhost.localdomain systemd[1]: Unit httpd.service entered failed state. 12月 05 14:42:42 localhost.localdomain systemd[1]: httpd.service failed. [root@localhost ~]#
可以看到Address already in use錯誤,修改apache的連接埠。
編輯/etc/httpd/conf/httpd.conf
#再重新啟動即可。
以上是在linux系統下apache的預設安裝路徑在哪的詳細內容。更多資訊請關注PHP中文網其他相關文章!

Apache的性能和靈活性使其在Web服務器中脫穎而出。 1)性能優勢體現在高效處理和可擴展性,通過多進程和多線程模型實現。 2)靈活性源於模塊化設計和配置的靈活性,允許根據需求加載模塊並調整服務器行為。

當 Apache 80 端口被佔用時,解決方法如下:找出佔用該端口的進程並關閉它。檢查防火牆設置以確保 Apache 未被阻止。如果以上方法無效,請重新配置 Apache 使用不同的端口。重啟 Apache 服務。

Apache 無法啟動,原因可能有以下幾點:配置文件語法錯誤。與其他應用程序端口衝突。權限問題。內存不足。進程死鎖。守護進程故障。 SELinux 權限問題。防火牆問題。軟件衝突。

要在 Apache 中設置 CGI 目錄,需要執行以下步驟:創建 CGI 目錄,如 "cgi-bin",並授予 Apache 寫入權限。在 Apache 配置文件中添加 "ScriptAlias" 指令塊,將 CGI 目錄映射到 "/cgi-bin" URL。重啟 Apache。

有 3 種方法可在 Apache 服務器上查看版本:通過命令行(apachectl -v 或 apache2ctl -v)、檢查服務器狀態頁(http://<服務器IP或域名>/server-status)或查看 Apache 配置文件(ServerVersion: Apache/<版本號>)。

要重啟 Apache 服務器,請按照以下步驟操作:Linux/macOS:運行 sudo systemctl restart apache2。 Windows:運行 net stop Apache2.4 然後 net start Apache2.4。運行 netstat -a | findstr 80 檢查服務器狀態。

要從 Apache 中刪除多餘的 ServerName 指令,可以採取以下步驟:識別並刪除多餘的 ServerName 指令。重新啟動 Apache 使更改生效。檢查配置文件驗證更改。測試服務器確保問題已解決。

啟動 Apache 的步驟如下:安裝 Apache(命令:sudo apt-get install apache2 或從官網下載)啟動 Apache(Linux:sudo systemctl start apache2;Windows:右鍵“Apache2.4”服務並選擇“啟動”)檢查是否已啟動(Linux:sudo systemctl status apache2;Windows:查看服務管理器中“Apache2.4”服務的狀態)啟用開機自動啟動(可選,Linux:sudo systemctl


熱AI工具

Undresser.AI Undress
人工智慧驅動的應用程序,用於創建逼真的裸體照片

AI Clothes Remover
用於從照片中去除衣服的線上人工智慧工具。

Undress AI Tool
免費脫衣圖片

Clothoff.io
AI脫衣器

AI Hentai Generator
免費產生 AI 無盡。

熱門文章

熱工具

SAP NetWeaver Server Adapter for Eclipse
將Eclipse與SAP NetWeaver應用伺服器整合。

Atom編輯器mac版下載
最受歡迎的的開源編輯器

ZendStudio 13.5.1 Mac
強大的PHP整合開發環境

VSCode Windows 64位元 下載
微軟推出的免費、功能強大的一款IDE編輯器

禪工作室 13.0.1
強大的PHP整合開發環境