redis怎麼組成集群

簡單說明

2018十月Redis 發布了穩定版本的5.0 版本，推出了各種新特性，其中一點是放棄Ruby的叢集方式，改為使用C語言編寫的redis-cli的方式，使叢集的建構方式複雜度大大降低。關於叢集的更新可以在Redis5 的版本說明中看到，如下：

The cluster manager was ported from Ruby (redis-trib.rb) to C code inside redis-cli. check `redis-cli --cluster help ` for more info.

可以查看Redis官網查看叢集建立方式，連接如下

https://redis.io/topics/ cluster-tutorial

以下步驟是在一台Linux 伺服器上建置有6個節點的Redis叢集。

操作步驟

建立目錄

新目錄：/root/software/redis

下載原始碼並解壓縮編譯

wget http://download.redis.io/releases/redis-5.0.0.tar.gz
tar xzf redis-5.0.0.tar.gz
cd redis-5.0.0
make

建立6個Redis設定檔

6個設定檔不能在同一個目錄，這裡我們定義如下：

/root/software/redis/redis-cluster-conf/7001/redis.conf
/root/software/redis/redis-cluster-conf/7002/redis.conf
/root/software/redis/redis-cluster-conf/7003/redis.conf
/root/software/redis/redis-cluster-conf/7004/redis.conf
/root/software/redis/redis-cluster-conf/7005/redis.conf
/root/software/redis/redis-cluster-conf/7006/redis.conf

設定檔的內容為：

port 7001  #端口
cluster-enabled yes #启用集群模式
cluster-config-file nodes.conf
cluster-node-timeout 5000 #超时时间
appendonly yes
daemonize yes #后台运行
protected-mode no #非保护模式
pidfile  /var/run/redis_7001.pid

其中port 與pidfile 需要隨著資料夾的不同調增

#啟動節點

/root/software/redis/redis-5.0.0/src/redis-server  /root/software/redis/redis-cluster-conf/7001/redis.conf
/root/software/redis/redis-5.0.0/src/redis-server  /root/software/redis/redis-cluster-conf/7002/redis.conf
/root/software/redis/redis-5.0.0/src/redis-server  /root/software/redis/redis-cluster-conf/7003/redis.conf
/root/software/redis/redis-5.0.0/src/redis-server  /root/software/redis/redis-cluster-conf/7004/redis.conf
/root/software/redis/redis-5.0.0/src/redis-server  /root/software/redis/redis-cluster-conf/7005/redis.conf
/root/software/redis/redis-5.0.0/src/redis-server  /root/software/redis/redis-cluster-conf/7006/redis.conf

#啟動叢集

#

/root/software/redis/redis-5.0.0/src/redis-cli --cluster create 192.168.2.40:7001 192.168.2.40:7002 192.168.2.40:7003 192.168.2.40:7004 192.168.2.40:7005 192.168.2.40:7006 --cluster-replicas 1

啟動後，可看到成功訊息，如下：

>>> Performing hash slots allocation on 6 nodes...
Master[0] -> Slots 0 - 5460
Master[1] -> Slots 5461 - 10922
Master[2] -> Slots 10923 - 16383
Adding replica 192.168.2.40:7004 to 192.168.2.40:7001
Adding replica 192.168.2.40:7005 to 192.168.2.40:7002
Adding replica 192.168.2.40:7006 to 192.168.2.40:7003
>>> Trying to optimize slaves allocation for anti-affinity
[WARNING] Some slaves are in the same host as their master
M: 191c645200a8b4d267f71e3354c8248dbb533dde 192.168.2.40:7001
   slots:[0-5460] (5461 slots) master
M: 400a08d4e5a534c1b609988105d3e045395fbd12 192.168.2.40:7002
   slots:[5461-10922] (5462 slots) master
M: 684f6aa0fbccda295ce6818a8c01ee7255a7b002 192.168.2.40:7003
   slots:[10923-16383] (5461 slots) master
S: f2701549ae98315b432d73b49d139ee77d5685b4 192.168.2.40:7004
   replicates 684f6aa0fbccda295ce6818a8c01ee7255a7b002
S: 9fdc1e375436767ab815cbddd3df674f3bc2ca99 192.168.2.40:7005
   replicates 191c645200a8b4d267f71e3354c8248dbb533dde
S: e7742888ed85b37cff4a98e861e99bb16e8bae2c 192.168.2.40:7006
   replicates 400a08d4e5a534c1b609988105d3e045395fbd12
Can I set the above configuration? (type 'yes' to accept): yes
>>> Nodes configuration updated
>>> Assign a different config epoch to each node
>>> Sending CLUSTER MEET messages to join the cluster
Waiting for the cluster to join
....
>>> Performing Cluster Check (using node 192.168.2.40:7001)
M: 191c645200a8b4d267f71e3354c8248dbb533dde 192.168.2.40:7001
   slots:[0-5460] (5461 slots) master
   1 additional replica(s)
M: 684f6aa0fbccda295ce6818a8c01ee7255a7b002 192.168.2.40:7003
   slots:[10923-16383] (5461 slots) master
   1 additional replica(s)
S: 9fdc1e375436767ab815cbddd3df674f3bc2ca99 192.168.2.40:7005
   slots: (0 slots) slave
   replicates 191c645200a8b4d267f71e3354c8248dbb533dde
S: e7742888ed85b37cff4a98e861e99bb16e8bae2c 192.168.2.40:7006
   slots: (0 slots) slave
   replicates 400a08d4e5a534c1b609988105d3e045395fbd12
M: 400a08d4e5a534c1b609988105d3e045395fbd12 192.168.2.40:7002
   slots:[5461-10922] (5462 slots) master
   1 additional replica(s)
S: f2701549ae98315b432d73b49d139ee77d5685b4 192.168.2.40:7004
   slots: (0 slots) slave
   replicates 684f6aa0fbccda295ce6818a8c01ee7255a7b002
[OK] All nodes agree about slots configuration.
>>> Check for open slots...
>>> Check slots coverage...
[OK] All 16384 slots covered.

至此，Reids叢集建置完成。

以上是redis怎麼組成集群的詳細內容。更多資訊請關注PHP中文網其他相關文章！