Android ListView運作原理完全解析，帶你從原始碼的角度徹底理解
- 高洛峰原創
- 2016-12-13 16:33:221148瀏覽
在Android所有常用的原生控制當中，用法最複雜的應該就是ListView了，它專門用來處理那種內容元素很多，手機螢幕無法顯示出所有內容的情況。 ListView可以使用清單的形式來展示內容，超出螢幕部分的內容只需要透過手指滑動就可以移動到螢幕內了。
另外ListView還有一個非常神奇的功能，我相信大家應該都體驗過，即使在ListView中加載非常非常多的數據，比如達到成百上千條甚至更多，ListView都不會發生OOM或是崩潰，而且隨著我們手指滑動來瀏覽更多資料時，程式所佔用的記憶體竟然都不會跟著成長。那麼ListView是怎麼實現這麼神奇的功能的呢？當初我就抱著學習的心態花了很長時間把ListView的源碼通讀了一遍，基本上了解了它的工作原理，在感嘆Google大神能夠寫出如此精妙代碼的同時我也有所敬畏，因為ListView的代碼量比較大，複雜度也很高，很難用文字表達清楚，於是我就放棄了把它寫成一篇部落格的想法。那麼現在回想起來這件事我已經腸子都悔青了，因為沒過幾個月時間我就把當初梳理清晰的源碼又忘的一干二淨。於是現在我又重新定下心來再次把ListView的源碼重讀了一遍，那麼這次我一定要把它寫成一篇博客，分享給大家的同時也當成我自己的筆記吧。
首先我們先來看看ListView的繼承結構，如下圖所示：
可以看到，ListView的繼承結構還是相當複雜的，它是直接繼承自的AbsListView，而sListView有兩個子實作類，一個是ListView，另一個是GridView，因此我們從這一點就可以猜出來，ListView和GridView在工作原理和實作上都是有很多共同點的。然後AbsListView又繼承自AdapterView，AdapterView繼承自ViewGroup，後面就是我們所熟知的了。先把ListView的繼承結構了解一下，待會兒有助於我們更清楚分析程式碼。
Android ListView運作原理完全解析，帶你從原始碼的角度徹底理解
Adapter相信大家都不會陌生，我們平時使用ListView的時候一定都會用到它。那麼話說回來大家有沒有仔細想過，為什麼需要Adapter這個東西呢？總是覺得有了Adapter，ListView的使用變得比其它控制複雜得多。那麼這裡我們就先來學習Adapter到底起到了什麼樣的一個作用。
其實說到底，控制項就是為了互動和展示資料用的，只不過ListView更加特殊，它是為了展示很多很多資料用的，但是ListView只承擔互動和展示工作而已，至於這些資料來自哪裡，ListView是不關心的。因此，我們能設想到的最基本的ListView工作模式就是要有一個ListView控制項和一個資料來源。
不過如果真的讓ListView和資料來源直接打交道的話，那ListView要做的適配工作就非常繁雜了。因為資料來源這個概念太模糊了，我們只知道它包含了很多資料而已，至於這個資料來源到底是什麼樣類型，並沒有嚴格的定義，有可能是數組，也有可能是集合，甚至有可能是資料庫表中查詢出來的遊標。所以說如果ListView真的去為每一種資料來源都進行適配操作的話，一是擴展性會比較差，內建了幾種適配就只有幾種適配，不能動態進行添加。二是超出了它本身應該負責的工作範圍，不再是僅僅承擔互動和展示工作就可以了，這樣ListView就會變得比較臃腫。
那麼顯然Android開發團隊是不會允許這種事情發生的，所以就有了Adapter這樣一個機制的出現。顧名思義，Adapter是適配器的意思，它在ListView和資料來源之間起到了一個橋樑的作用，ListView並不會直接和資料來源打交道，而是會藉助Adapter這個橋樑來去存取真正的資料來源，與之前不同的是，Adapter的介面都是統一的，因此ListView不用再去擔心任何適合方面的問題。而Adapter又是一個介面(interface)，它可以去實現各種各樣的子類，每個子類別都能透過自己的邏輯來去完成特定的功能，以及與特定資料來源的適配操作，比如說ArrayAdapter可以用於數組和List類型的資料來源適配，SimpleCursorAdapter可以用於遊標類型的資料來源適配，這樣就非常巧妙地把資料來源適配困難的問題解決掉了，並且還擁有相當不錯的擴展性。簡單的原理示意圖如下：
當然Android ListView運作原理完全解析，帶你從原始碼的角度徹底理解不隻隻有資料來源適配這一點，還有一個非常非常重要的方法也需要我們在Adapter當中去重寫，就是getView()方法，這個在下面的文章中還會詳細講到。
RecycleBin機制
那麼在開始分析ListView的源碼之前，還有一個東西是我們提前需要了解的，就是RecycleBin機制，這個機制也是ListView能夠實現成百上千條數據都不會OOM最重要的一個原因。其實RecycleBin的程式碼不多，只有300行左右，它是寫在AbsListView中的一個內部類，所以所有繼承自AbsListView的子類，也就是ListView和GridView，都可以使用這個機制。那我們來看看RecycleBin中的主要程式碼，如下所示：
/**
* The RecycleBin facilitates reuse of views across layouts. The RecycleBin
* has two levels of storage: ActiveViews and ScrapViews. ActiveViews are
* those views which were onscreen at the start of a layout. By
* construction, they are displaying current information. At the end of
* layout, all views in ActiveViews are demoted to ScrapViews. ScrapViews
* are old views that could potentially be used by the adapter to avoid
* allocating views unnecessarily.
*
* @see android.widget.AbsListView#setRecyclerListener(android.widget.AbsListView.RecyclerListener)
* @see android.widget.AbsListView.RecyclerListener
*/
class RecycleBin {
private RecyclerListener mRecyclerListener;
/**
* The position of the first view stored in mActiveViews.
*/
private int mFirstActivePosition;
/**
* Views that were on screen at the start of layout. This array is
* populated at the start of layout, and at the end of layout all view
* in mActiveViews are moved to mScrapViews. Views in mActiveViews
* represent a contiguous range of Views, with position of the first
* view store in mFirstActivePosition.
*/
private View[] mActiveViews = new View[0];
/**
* Unsorted views that can be used by the adapter as a convert view.
*/
private ArrayList<View>[] mScrapViews;
private int mViewTypeCount;
private ArrayList<View> mCurrentScrap;
/**
* Fill ActiveViews with all of the children of the AbsListView.
*
* @param childCount
* The minimum number of views mActiveViews should hold
* @param firstActivePosition
* The position of the first view that will be stored in
* mActiveViews
*/
void fillActiveViews(int childCount, int firstActivePosition) {
if (mActiveViews.length < childCount) {
mActiveViews = new View[childCount];
}
mFirstActivePosition = firstActivePosition;
final View[] activeViews = mActiveViews;
for (int i = 0; i < childCount; i++) {
View child = getChildAt(i);
AbsListView.LayoutParams lp = (AbsListView.LayoutParams) child.getLayoutParams();
// Don't put header or footer views into the scrap heap
if (lp != null && lp.viewType != ITEM_VIEW_TYPE_HEADER_OR_FOOTER) {
// Note: We do place AdapterView.ITEM_VIEW_TYPE_IGNORE in
// active views.
// However, we will NOT place them into scrap views.
activeViews[i] = child;
}
}
}
/**
* Get the view corresponding to the specified position. The view will
* be removed from mActiveViews if it is found.
*
* @param position
* The position to look up in mActiveViews
* @return The view if it is found, null otherwise
*/
View getActiveView(int position) {
int index = position - mFirstActivePosition;
final View[] activeViews = mActiveViews;
if (index >= 0 && index < activeViews.length) {
final View match = activeViews[index];
activeViews[index] = null;
return match;
}
return null;
}
/**
* Put a view into the ScapViews list. These views are unordered.
*
* @param scrap
* The view to add
*/
void addScrapView(View scrap) {
AbsListView.LayoutParams lp = (AbsListView.LayoutParams) scrap.getLayoutParams();
if (lp == null) {
return;
}
// Don't put header or footer views or views that should be ignored
// into the scrap heap
int viewType = lp.viewType;
if (!shouldRecycleViewType(viewType)) {
if (viewType != ITEM_VIEW_TYPE_HEADER_OR_FOOTER) {
removeDetachedView(scrap, false);
}
return;
}
if (mViewTypeCount == 1) {
dispatchFinishTemporaryDetach(scrap);
mCurrentScrap.add(scrap);
} else {
dispatchFinishTemporaryDetach(scrap);
mScrapViews[viewType].add(scrap);
}
if (mRecyclerListener != null) {
mRecyclerListener.onMovedToScrapHeap(scrap);
}
}
/**
* @return A view from the ScrapViews collection. These are unordered.
*/
View getScrapView(int position) {
ArrayList<View> scrapViews;
if (mViewTypeCount == 1) {
scrapViews = mCurrentScrap;
int size = scrapViews.size();
if (size > 0) {
return scrapViews.remove(size - 1);
} else {
return null;
}
} else {
int whichScrap = mAdapter.getItemViewType(position);
if (whichScrap >= 0 && whichScrap < mScrapViews.length) {
scrapViews = mScrapViews[whichScrap];
int size = scrapViews.size();
if (size > 0) {
return scrapViews.remove(size - 1);
}
}
}
return null;
}
public void setViewTypeCount(int viewTypeCount) {
if (viewTypeCount < 1) {
throw new IllegalArgumentException("Can't have a viewTypeCount < 1");
}
// noinspection unchecked
ArrayList<View>[] scrapViews = new ArrayList[viewTypeCount];
for (int i = 0; i < viewTypeCount; i++) {
scrapViews[i] = new ArrayList<View>();
}
mViewTypeCount = viewTypeCount;
mCurrentScrap = scrapViews[0];
mScrapViews = scrapViews;
}
}這裡的RecycleBin程式碼並不全，我只是把最主要的幾個方法提了出來。那我們先來對這幾個方法進行簡單解讀，這對後面分析ListView的工作原理將會有很大的幫助。
fillActiveViews() 這個方法接收兩個參數，第一個參數表示要儲存的view的數量，第二個參數表示ListView中第一個可見元素的position值。 RecycleBin當中使用mActiveViews這個陣列來儲存View，呼叫這個方法後就會根據傳入的參數來將ListView中的指定元素儲存到mActiveViews陣列當中。
getActiveView() 這個方法和fillActiveViews()是對應的，用於從mActiveViews數組當中取得資料。此方法接收一個position參數，表示元素在ListView當中的位置，方法內部會自動將position值轉換成mActiveViews陣列對應的下標值。要注意的是，mActiveViews當中所儲存的View，一旦被取得了之後就會從mActiveViews當中移除，下次取得同樣位置的View將會傳回null，也就是說mActiveViews不能被重複利用。
addScrapView() 用於將一個廢棄的View進行緩存，該方法接收一個View參數，當有某個View確定要廢棄掉的時候(比如滾動出了屏幕)，就應該調用這個方法來對View進行緩存，RecycleBin當中使用mScrapViews和mCurrentScrap這兩個List來儲存廢棄View。
getScrapView 用來從廢棄快取中取出一個View，這些廢棄快取中的View是沒有順序可言的，因此getScrapView()方法中的演算法也非常簡單，就是直接從mCurrentScrap當中取得尾部的一個scrap view進行返回。
setViewTypeCount() 我們都知道Adapter當中可以重寫一個getViewTypeCount()來表示ListView中有幾種類型的資料項，而setViewTypeCount()方法的功能就是為每種類型的資料項都單獨啟用一個RecycleBin快取機制。實際上，getViewTypeCount()方法通常情況下使用的並不是很多，所以我們只要知道RecycleBin當中有這樣一個功能就行了。
了解了RecycleBin中的主要方法以及它們的用處之後，下面就可以開始來分析ListView的工作原理了，這裡我將還是按照以前分析源碼的方式來進行，即跟著主線執行流程來逐步閱讀並點到即止，不然的話要是把ListView所有的程式碼都貼出來，那麼這篇文章將會很長很長了。
第一次Layout
View的執行流程無非就分為三步，onMeasure()用於測量View的大小，onLayout()用於確定View的佈局，onDraw()用於將View繪製到介面上。而在ListView當中，onMeasure()並沒有什麼特殊的地方，因為它終歸是一個View，佔用的空間最多並且通常也就是整個螢幕。 onDraw()在ListView當中也沒有什麼意義，因為ListView本身並不負責繪製，而是由ListView當中的子元素來進行繪製的。那麼ListView大部分的神奇功能其實都是在onLayout()方法中進行的了，因此我們這篇文章也是主要分析的這個方法裡的內容。
如果你到ListView原始碼中去找一找，你會發現ListView中是沒有onLayout()這個方法的，這是因為這個方法是在ListView的父類AbsListView中實現的，代碼如下所示：
/**
* Subclasses should NOT override this method but {@link #layoutChildren()}
* instead.
*/
@Override
protected void onLayout(boolean changed, int l, int t, int r, int b) {
super.onLayout(changed, l, t, r, b);
mInLayout = true;
if (changed) {
int childCount = getChildCount();
for (int i = 0; i < childCount; i++) {
getChildAt(i).forceLayout();
}
mRecycler.markChildrenDirty();
}
layoutChildren();
mInLayout = false;
}可以看到，onLayout()方法中并没有做什么复杂的逻辑操作，主要就是一个判断，如果ListView的大小或者位置发生了变化，那么changed变量就会变成true，此时会要求所有的子布局都强制进行重绘。除此之外倒没有什么难理解的地方了，不过我们注意到，在第16行调用了layoutChildren()这个方法，从方法名上我们就可以猜出这个方法是用来进行子元素布局的，不过进入到这个方法当中你会发现这是个空方法，没有一行代码。这当然是可以理解的了，因为子元素的布局应该是由具体的实现类来负责完成的，而不是由父类完成。那么进入ListView的layoutChildren()方法，代码如下所示：
@Override
protected void layoutChildren() {
final boolean blockLayoutRequests = mBlockLayoutRequests;
if (!blockLayoutRequests) {
mBlockLayoutRequests = true;
} else {
return;
}
try {
super.layoutChildren();
invalidate();
if (mAdapter == null) {
resetList();
invokeOnItemScrollListener();
return;
}
int childrenTop = mListPadding.top;
int childrenBottom = getBottom() - getTop() - mListPadding.bottom;
int childCount = getChildCount();
int index = 0;
int delta = 0;
View sel;
View oldSel = null;
View oldFirst = null;
View newSel = null;
View focusLayoutRestoreView = null;
// Remember stuff we will need down below
switch (mLayoutMode) {
case LAYOUT_SET_SELECTION:
index = mNextSelectedPosition - mFirstPosition;
if (index >= 0 && index < childCount) {
newSel = getChildAt(index);
}
break;
case LAYOUT_FORCE_TOP:
case LAYOUT_FORCE_BOTTOM:
case LAYOUT_SPECIFIC:
case LAYOUT_SYNC:
break;
case LAYOUT_MOVE_SELECTION:
default:
// Remember the previously selected view
index = mSelectedPosition - mFirstPosition;
if (index >= 0 && index < childCount) {
oldSel = getChildAt(index);
}
// Remember the previous first child
oldFirst = getChildAt(0);
if (mNextSelectedPosition >= 0) {
delta = mNextSelectedPosition - mSelectedPosition;
}
// Caution: newSel might be null
newSel = getChildAt(index + delta);
}
boolean dataChanged = mDataChanged;
if (dataChanged) {
handleDataChanged();
}
// Handle the empty set by removing all views that are visible
// and calling it a day
if (mItemCount == 0) {
resetList();
invokeOnItemScrollListener();
return;
} else if (mItemCount != mAdapter.getCount()) {
throw new IllegalStateException("The content of the adapter has changed but "
+ "ListView did not receive a notification. Make sure the content of "
+ "your adapter is not modified from a background thread, but only "
+ "from the UI thread. [in ListView(" + getId() + ", " + getClass()
+ ") with Adapter(" + mAdapter.getClass() + ")]");
}
setSelectedPositionInt(mNextSelectedPosition);
// Pull all children into the RecycleBin.
// These views will be reused if possible
final int firstPosition = mFirstPosition;
final RecycleBin recycleBin = mRecycler;
// reset the focus restoration
View focusLayoutRestoreDirectChild = null;
// Don't put header or footer views into the Recycler. Those are
// already cached in mHeaderViews;
if (dataChanged) {
for (int i = 0; i < childCount; i++) {
recycleBin.addScrapView(getChildAt(i));
if (ViewDebug.TRACE_RECYCLER) {
ViewDebug.trace(getChildAt(i),
ViewDebug.RecyclerTraceType.MOVE_TO_SCRAP_HEAP, index, i);
}
}
} else {
recycleBin.fillActiveViews(childCount, firstPosition);
}
// take focus back to us temporarily to avoid the eventual
// call to clear focus when removing the focused child below
// from messing things up when ViewRoot assigns focus back
// to someone else
final View focusedChild = getFocusedChild();
if (focusedChild != null) {
// TODO: in some cases focusedChild.getParent() == null
// we can remember the focused view to restore after relayout if the
// data hasn't changed, or if the focused position is a header or footer
if (!dataChanged || isDirectChildHeaderOrFooter(focusedChild)) {
focusLayoutRestoreDirectChild = focusedChild;
// remember the specific view that had focus
focusLayoutRestoreView = findFocus();
if (focusLayoutRestoreView != null) {
// tell it we are going to mess with it
focusLayoutRestoreView.onStartTemporaryDetach();
}
}
requestFocus();
}
// Clear out old views
detachAllViewsFromParent();
switch (mLayoutMode) {
case LAYOUT_SET_SELECTION:
if (newSel != null) {
sel = fillFromSelection(newSel.getTop(), childrenTop, childrenBottom);
} else {
sel = fillFromMiddle(childrenTop, childrenBottom);
}
break;
case LAYOUT_SYNC:
sel = fillSpecific(mSyncPosition, mSpecificTop);
break;
case LAYOUT_FORCE_BOTTOM:
sel = fillUp(mItemCount - 1, childrenBottom);
adjustViewsUpOrDown();
break;
case LAYOUT_FORCE_TOP:
mFirstPosition = 0;
sel = fillFromTop(childrenTop);
adjustViewsUpOrDown();
break;
case LAYOUT_SPECIFIC:
sel = fillSpecific(reconcileSelectedPosition(), mSpecificTop);
break;
case LAYOUT_MOVE_SELECTION:
sel = moveSelection(oldSel, newSel, delta, childrenTop, childrenBottom);
break;
default:
if (childCount == 0) {
if (!mStackFromBottom) {
final int position = lookForSelectablePosition(0, true);
setSelectedPositionInt(position);
sel = fillFromTop(childrenTop);
} else {
final int position = lookForSelectablePosition(mItemCount - 1, false);
setSelectedPositionInt(position);
sel = fillUp(mItemCount - 1, childrenBottom);
}
} else {
if (mSelectedPosition >= 0 && mSelectedPosition < mItemCount) {
sel = fillSpecific(mSelectedPosition,
oldSel == null ? childrenTop : oldSel.getTop());
} else if (mFirstPosition < mItemCount) {
sel = fillSpecific(mFirstPosition,
oldFirst == null ? childrenTop : oldFirst.getTop());
} else {
sel = fillSpecific(0, childrenTop);
}
}
break;
}
// Flush any cached views that did not get reused above
recycleBin.scrapActiveViews();
if (sel != null) {
// the current selected item should get focus if items
// are focusable
if (mItemsCanFocus && hasFocus() && !sel.hasFocus()) {
final boolean focusWasTaken = (sel == focusLayoutRestoreDirectChild &&
focusLayoutRestoreView.requestFocus()) || sel.requestFocus();
if (!focusWasTaken) {
// selected item didn't take focus, fine, but still want
// to make sure something else outside of the selected view
// has focus
final View focused = getFocusedChild();
if (focused != null) {
focused.clearFocus();
}
positionSelector(sel);
} else {
sel.setSelected(false);
mSelectorRect.setEmpty();
}
} else {
positionSelector(sel);
}
mSelectedTop = sel.getTop();
} else {
if (mTouchMode > TOUCH_MODE_DOWN && mTouchMode < TOUCH_MODE_SCROLL) {
View child = getChildAt(mMotionPosition - mFirstPosition);
if (child != null) positionSelector(child);
} else {
mSelectedTop = 0;
mSelectorRect.setEmpty();
}
// even if there is not selected position, we may need to restore
// focus (i.e. something focusable in touch mode)
if (hasFocus() && focusLayoutRestoreView != null) {
focusLayoutRestoreView.requestFocus();
}
}
// tell focus view we are done mucking with it, if it is still in
// our view hierarchy.
if (focusLayoutRestoreView != null
&& focusLayoutRestoreView.getWindowToken() != null) {
focusLayoutRestoreView.onFinishTemporaryDetach();
}
mLayoutMode = LAYOUT_NORMAL;
mDataChanged = false;
mNeedSync = false;
setNextSelectedPositionInt(mSelectedPosition);
updateScrollIndicators();
if (mItemCount > 0) {
checkSelectionChanged();
}
invokeOnItemScrollListener();
} finally {
if (!blockLayoutRequests) {
mBlockLayoutRequests = false;
}
}
}这段代码比较长，我们挑重点的看。首先可以确定的是，ListView当中目前还没有任何子View，数据都还是由Adapter管理的，并没有展示到界面上，因此第19行getChildCount()方法得到的值肯定是0。接着在第81行会根据dataChanged这个布尔型的值来判断执行逻辑，dataChanged只有在数据源发生改变的情况下才会变成true，其它情况都是false，因此这里会进入到第90行的执行逻辑，调用RecycleBin的fillActiveViews()方法。按理来说，调用fillActiveViews()方法是为了将ListView的子View进行缓存的，可是目前ListView中还没有任何的子View，因此这一行暂时还起不了任何作用。
接下来在第114行会根据mLayoutMode的值来决定布局模式，默认情况下都是普通模式LAYOUT_NORMAL，因此会进入到第140行的default语句当中。而下面又会紧接着进行两次if判断，childCount目前是等于0的，并且默认的布局顺序是从上往下，因此会进入到第145行的fillFromTop()方法，我们跟进去瞧一瞧：
/**
* Fills the list from top to bottom, starting with mFirstPosition
*
* @param nextTop The location where the top of the first item should be
* drawn
*
* @return The view that is currently selected
*/
private View fillFromTop(int nextTop) {
mFirstPosition = Math.min(mFirstPosition, mSelectedPosition);
mFirstPosition = Math.min(mFirstPosition, mItemCount - 1);
if (mFirstPosition < 0) {
mFirstPosition = 0;
}
return fillDown(mFirstPosition, nextTop);
}从这个方法的注释中可以看出，它所负责的主要任务就是从mFirstPosition开始，自顶至底去填充ListView。而这个方法本身并没有什么逻辑，就是判断了一下mFirstPosition值的合法性，然后调用fillDown()方法，那么我们就有理由可以猜测，填充ListView的操作是在fillDown()方法中完成的。进入fillDown()方法，代码如下所示：
/**
* Fills the list from pos down to the end of the list view.
*
* @param pos The first position to put in the list
*
* @param nextTop The location where the top of the item associated with pos
* should be drawn
*
* @return The view that is currently selected, if it happens to be in the
* range that we draw.
*/
private View fillDown(int pos, int nextTop) {
View selectedView = null;
int end = (getBottom() - getTop()) - mListPadding.bottom;
while (nextTop < end && pos < mItemCount) {
// is this the selected item?
boolean selected = pos == mSelectedPosition;
View child = makeAndAddView(pos, nextTop, true, mListPadding.left, selected);
nextTop = child.getBottom() + mDividerHeight;
if (selected) {
selectedView = child;
}
pos++;
}
return selectedView;
}可以看到，这里使用了一个while循环来执行重复逻辑，一开始nextTop的值是第一个子元素顶部距离整个ListView顶部的像素值，pos则是刚刚传入的mFirstPosition的值，而end是ListView底部减去顶部所得的像素值，mItemCount则是Adapter中的元素数量。因此一开始的情况下nextTop必定是小于end值的，并且pos也是小于mItemCount值的。那么每执行一次while循环，pos的值都会加1，并且nextTop也会增加，当nextTop大于等于end时，也就是子元素已经超出当前屏幕了，或者pos大于等于mItemCount时，也就是所有Adapter中的元素都被遍历结束了，就会跳出while循环。
那么while循环当中又做了什么事情呢？值得让人留意的就是第18行调用的makeAndAddView()方法，进入到这个方法当中，代码如下所示：
/**
* Obtain the view and add it to our list of children. The view can be made
* fresh, converted from an unused view, or used as is if it was in the
* recycle bin.
*
* @param position Logical position in the list
* @param y Top or bottom edge of the view to add
* @param flow If flow is true, align top edge to y. If false, align bottom
* edge to y.
* @param childrenLeft Left edge where children should be positioned
* @param selected Is this position selected?
* @return View that was added
*/
private View makeAndAddView(int position, int y, boolean flow, int childrenLeft,
boolean selected) {
View child;
if (!mDataChanged) {
// Try to use an exsiting view for this position
child = mRecycler.getActiveView(position);
if (child != null) {
// Found it -- we're using an existing child
// This just needs to be positioned
setupChild(child, position, y, flow, childrenLeft, selected, true);
return child;
}
}
// Make a new view for this position, or convert an unused view if possible
child = obtainView(position, mIsScrap);
// This needs to be positioned and measured
setupChild(child, position, y, flow, childrenLeft, selected, mIsScrap[0]);
return child;
}这里在第19行尝试从RecycleBin当中快速获取一个active view，不过很遗憾的是目前RecycleBin当中还没有缓存任何的View，所以这里得到的值肯定是null。那么取得了null之后就会继续向下运行，到第28行会调用obtainView()方法来再次尝试获取一个View，这次的obtainView()方法是可以保证一定返回一个View的，于是下面立刻将获取到的View传入到了setupChild()方法当中。那么obtainView()内部到底是怎么工作的呢？我们先进入到这个方法里面看一下：
/**
* Get a view and have it show the data associated with the specified
* position. This is called when we have already discovered that the view is
* not available for reuse in the recycle bin. The only choices left are
* converting an old view or making a new one.
*
* @param position
* The position to display
* @param isScrap
* Array of at least 1 boolean, the first entry will become true
* if the returned view was taken from the scrap heap, false if
* otherwise.
*
* @return A view displaying the data associated with the specified position
*/
View obtainView(int position, boolean[] isScrap) {
isScrap[0] = false;
View scrapView;
scrapView = mRecycler.getScrapView(position);
View child;
if (scrapView != null) {
child = mAdapter.getView(position, scrapView, this);
if (child != scrapView) {
mRecycler.addScrapView(scrapView);
if (mCacheColorHint != 0) {
child.setDrawingCacheBackgroundColor(mCacheColorHint);
}
} else {
isScrap[0] = true;
dispatchFinishTemporaryDetach(child);
}
} else {
child = mAdapter.getView(position, null, this);
if (mCacheColorHint != 0) {
child.setDrawingCacheBackgroundColor(mCacheColorHint);
}
}
return child;
}obtainView()方法中的代码并不多，但却包含了非常非常重要的逻辑，不夸张的说，整个ListView中最重要的内容可能就在这个方法里了。那么我们还是按照执行流程来看，在第19行代码中调用了RecycleBin的getScrapView()方法来尝试获取一个废弃缓存中的View，同样的道理，这里肯定是获取不到的，getScrapView()方法会返回一个null。这时该怎么办呢？没有关系，代码会执行到第33行，调用mAdapter的getView()方法来去获取一个View。那么mAdapter是什么呢？当然就是当前ListView关联的适配器了。而getView()方法又是什么呢？还用说吗，这个就是我们平时使用ListView时最最经常重写的一个方法了，这里getView()方法中传入了三个参数，分别是position，null和this。
那么我们平时写ListView的Adapter时，getView()方法通常会怎么写呢？这里我举个简单的例子：
@Override
public View getView(int position, View convertView, ViewGroup parent) {
Fruit fruit = getItem(position);
View view;
if (convertView == null) {
view = LayoutInflater.from(getContext()).inflate(resourceId, null);
} else {
view = convertView;
}
ImageView fruitImage = (ImageView) view.findViewById(R.id.fruit_image);
TextView fruitName = (TextView) view.findViewById(R.id.fruit_name);
fruitImage.setImageResource(fruit.getImageId());
fruitName.setText(fruit.getName());
return view;
}getView()方法接受的三个参数，第一个参数position代表当前子元素的的位置，我们可以通过具体的位置来获取与其相关的数据。第二个参数convertView，刚才传入的是null，说明没有convertView可以利用，因此我们会调用LayoutInflater的inflate()方法来去加载一个布局。接下来会对这个view进行一些属性和值的设定，最后将view返回。
那么这个View也会作为obtainView()的结果进行返回，并最终传入到setupChild()方法当中。其实也就是说，第一次layout过程当中，所有的子View都是调用LayoutInflater的inflate()方法加载出来的，这样就会相对比较耗时，但是不用担心，后面就不会再有这种情况了，那么我们继续往下看：
/**
* Add a view as a child and make sure it is measured (if necessary) and
* positioned properly.
*
* @param child The view to add
* @param position The position of this child
* @param y The y position relative to which this view will be positioned
* @param flowDown If true, align top edge to y. If false, align bottom
* edge to y.
* @param childrenLeft Left edge where children should be positioned
* @param selected Is this position selected?
* @param recycled Has this view been pulled from the recycle bin? If so it
* does not need to be remeasured.
*/
private void setupChild(View child, int position, int y, boolean flowDown, int childrenLeft,
boolean selected, boolean recycled) {
final boolean isSelected = selected && shouldShowSelector();
final boolean updateChildSelected = isSelected != child.isSelected();
final int mode = mTouchMode;
final boolean isPressed = mode > TOUCH_MODE_DOWN && mode < TOUCH_MODE_SCROLL &&
mMotionPosition == position;
final boolean updateChildPressed = isPressed != child.isPressed();
final boolean needToMeasure = !recycled || updateChildSelected || child.isLayoutRequested();
// Respect layout params that are already in the view. Otherwise make some up...
// noinspection unchecked
AbsListView.LayoutParams p = (AbsListView.LayoutParams) child.getLayoutParams();
if (p == null) {
p = new AbsListView.LayoutParams(ViewGroup.LayoutParams.MATCH_PARENT,
ViewGroup.LayoutParams.WRAP_CONTENT, 0);
}
p.viewType = mAdapter.getItemViewType(position);
if ((recycled && !p.forceAdd) || (p.recycledHeaderFooter &&
p.viewType == AdapterView.ITEM_VIEW_TYPE_HEADER_OR_FOOTER)) {
attachViewToParent(child, flowDown ? -1 : 0, p);
} else {
p.forceAdd = false;
if (p.viewType == AdapterView.ITEM_VIEW_TYPE_HEADER_OR_FOOTER) {
p.recycledHeaderFooter = true;
}
addViewInLayout(child, flowDown ? -1 : 0, p, true);
}
if (updateChildSelected) {
child.setSelected(isSelected);
}
if (updateChildPressed) {
child.setPressed(isPressed);
}
if (needToMeasure) {
int childWidthSpec = ViewGroup.getChildMeasureSpec(mWidthMeasureSpec,
mListPadding.left + mListPadding.right, p.width);
int lpHeight = p.height;
int childHeightSpec;
if (lpHeight > 0) {
childHeightSpec = MeasureSpec.makeMeasureSpec(lpHeight, MeasureSpec.EXACTLY);
} else {
childHeightSpec = MeasureSpec.makeMeasureSpec(0, MeasureSpec.UNSPECIFIED);
}
child.measure(childWidthSpec, childHeightSpec);
} else {
cleanupLayoutState(child);
}
final int w = child.getMeasuredWidth();
final int h = child.getMeasuredHeight();
final int childTop = flowDown ? y : y - h;
if (needToMeasure) {
final int childRight = childrenLeft + w;
final int childBottom = childTop + h;
child.layout(childrenLeft, childTop, childRight, childBottom);
} else {
child.offsetLeftAndRight(childrenLeft - child.getLeft());
child.offsetTopAndBottom(childTop - child.getTop());
}
if (mCachingStarted && !child.isDrawingCacheEnabled()) {
child.setDrawingCacheEnabled(true);
}
}setupChild()方法当中的代码虽然比较多，但是我们只看核心代码的话就非常简单了，刚才调用obtainView()方法获取到的子元素View，这里在第40行调用了addViewInLayout()方法将它添加到了ListView当中。那么根据fillDown()方法中的while循环，会让子元素View将整个ListView控件填满然后就跳出，也就是说即使我们的Adapter中有一千条数据，ListView也只会加载第一屏的数据，剩下的数据反正目前在屏幕上也看不到，所以不会去做多余的加载工作，这样就可以保证ListView中的内容能够迅速展示到屏幕上。
那么到此为止，第一次Layout过程结束。
第二次Layout
虽然我在源码中并没有找出具体的原因，但如果你自己做一下实验的话就会发现，即使是一个再简单的View，在展示到界面上之前都会经历至少两次onMeasure()和两次onLayout()的过程。其实这只是一个很小的细节，平时对我们影响并不大，因为不管是onMeasure()或者onLayout()几次，反正都是执行的相同的逻辑，我们并不需要进行过多关心。但是在ListView中情况就不一样了，因为这就意味着layoutChildren()过程会执行两次，而这个过程当中涉及到向ListView中添加子元素，如果相同的逻辑执行两遍的话，那么ListView中就会存在一份重复的数据了。因此ListView在layoutChildren()过程当中做了第二次Layout的逻辑处理，非常巧妙地解决了这个问题，下面我们就来分析一下第二次Layout的过程。
其实第二次Layout和第一次Layout的基本流程是差不多的，那么我们还是从layoutChildren()方法开始看起：
@Override
protected void layoutChildren() {
final boolean blockLayoutRequests = mBlockLayoutRequests;
if (!blockLayoutRequests) {
mBlockLayoutRequests = true;
} else {
return;
}
try {
super.layoutChildren();
invalidate();
if (mAdapter == null) {
resetList();
invokeOnItemScrollListener();
return;
}
int childrenTop = mListPadding.top;
int childrenBottom = getBottom() - getTop() - mListPadding.bottom;
int childCount = getChildCount();
int index = 0;
int delta = 0;
View sel;
View oldSel = null;
View oldFirst = null;
View newSel = null;
View focusLayoutRestoreView = null;
// Remember stuff we will need down below
switch (mLayoutMode) {
case LAYOUT_SET_SELECTION:
index = mNextSelectedPosition - mFirstPosition;
if (index >= 0 && index < childCount) {
newSel = getChildAt(index);
}
break;
case LAYOUT_FORCE_TOP:
case LAYOUT_FORCE_BOTTOM:
case LAYOUT_SPECIFIC:
case LAYOUT_SYNC:
break;
case LAYOUT_MOVE_SELECTION:
default:
// Remember the previously selected view
index = mSelectedPosition - mFirstPosition;
if (index >= 0 && index < childCount) {
oldSel = getChildAt(index);
}
// Remember the previous first child
oldFirst = getChildAt(0);
if (mNextSelectedPosition >= 0) {
delta = mNextSelectedPosition - mSelectedPosition;
}
// Caution: newSel might be null
newSel = getChildAt(index + delta);
}
boolean dataChanged = mDataChanged;
if (dataChanged) {
handleDataChanged();
}
// Handle the empty set by removing all views that are visible
// and calling it a day
if (mItemCount == 0) {
resetList();
invokeOnItemScrollListener();
return;
} else if (mItemCount != mAdapter.getCount()) {
throw new IllegalStateException("The content of the adapter has changed but "
+ "ListView did not receive a notification. Make sure the content of "
+ "your adapter is not modified from a background thread, but only "
+ "from the UI thread. [in ListView(" + getId() + ", " + getClass()
+ ") with Adapter(" + mAdapter.getClass() + ")]");
}
setSelectedPositionInt(mNextSelectedPosition);
// Pull all children into the RecycleBin.
// These views will be reused if possible
final int firstPosition = mFirstPosition;
final RecycleBin recycleBin = mRecycler;
// reset the focus restoration
View focusLayoutRestoreDirectChild = null;
// Don't put header or footer views into the Recycler. Those are
// already cached in mHeaderViews;
if (dataChanged) {
for (int i = 0; i < childCount; i++) {
recycleBin.addScrapView(getChildAt(i));
if (ViewDebug.TRACE_RECYCLER) {
ViewDebug.trace(getChildAt(i),
ViewDebug.RecyclerTraceType.MOVE_TO_SCRAP_HEAP, index, i);
}
}
} else {
recycleBin.fillActiveViews(childCount, firstPosition);
}
// take focus back to us temporarily to avoid the eventual
// call to clear focus when removing the focused child below
// from messing things up when ViewRoot assigns focus back
// to someone else
final View focusedChild = getFocusedChild();
if (focusedChild != null) {
// TODO: in some cases focusedChild.getParent() == null
// we can remember the focused view to restore after relayout if the
// data hasn't changed, or if the focused position is a header or footer
if (!dataChanged || isDirectChildHeaderOrFooter(focusedChild)) {
focusLayoutRestoreDirectChild = focusedChild;
// remember the specific view that had focus
focusLayoutRestoreView = findFocus();
if (focusLayoutRestoreView != null) {
// tell it we are going to mess with it
focusLayoutRestoreView.onStartTemporaryDetach();
}
}
requestFocus();
}
// Clear out old views
detachAllViewsFromParent();
switch (mLayoutMode) {
case LAYOUT_SET_SELECTION:
if (newSel != null) {
sel = fillFromSelection(newSel.getTop(), childrenTop, childrenBottom);
} else {
sel = fillFromMiddle(childrenTop, childrenBottom);
}
break;
case LAYOUT_SYNC:
sel = fillSpecific(mSyncPosition, mSpecificTop);
break;
case LAYOUT_FORCE_BOTTOM:
sel = fillUp(mItemCount - 1, childrenBottom);
adjustViewsUpOrDown();
break;
case LAYOUT_FORCE_TOP:
mFirstPosition = 0;
sel = fillFromTop(childrenTop);
adjustViewsUpOrDown();
break;
case LAYOUT_SPECIFIC:
sel = fillSpecific(reconcileSelectedPosition(), mSpecificTop);
break;
case LAYOUT_MOVE_SELECTION:
sel = moveSelection(oldSel, newSel, delta, childrenTop, childrenBottom);
break;
default:
if (childCount == 0) {
if (!mStackFromBottom) {
final int position = lookForSelectablePosition(0, true);
setSelectedPositionInt(position);
sel = fillFromTop(childrenTop);
} else {
final int position = lookForSelectablePosition(mItemCount - 1, false);
setSelectedPositionInt(position);
sel = fillUp(mItemCount - 1, childrenBottom);
}
} else {
if (mSelectedPosition >= 0 && mSelectedPosition < mItemCount) {
sel = fillSpecific(mSelectedPosition,
oldSel == null ? childrenTop : oldSel.getTop());
} else if (mFirstPosition < mItemCount) {
sel = fillSpecific(mFirstPosition,
oldFirst == null ? childrenTop : oldFirst.getTop());
} else {
sel = fillSpecific(0, childrenTop);
}
}
break;
}
// Flush any cached views that did not get reused above
recycleBin.scrapActiveViews();
if (sel != null) {
// the current selected item should get focus if items
// are focusable
if (mItemsCanFocus && hasFocus() && !sel.hasFocus()) {
final boolean focusWasTaken = (sel == focusLayoutRestoreDirectChild &&
focusLayoutRestoreView.requestFocus()) || sel.requestFocus();
if (!focusWasTaken) {
// selected item didn't take focus, fine, but still want
// to make sure something else outside of the selected view
// has focus
final View focused = getFocusedChild();
if (focused != null) {
focused.clearFocus();
}
positionSelector(sel);
} else {
sel.setSelected(false);
mSelectorRect.setEmpty();
}
} else {
positionSelector(sel);
}
mSelectedTop = sel.getTop();
} else {
if (mTouchMode > TOUCH_MODE_DOWN && mTouchMode < TOUCH_MODE_SCROLL) {
View child = getChildAt(mMotionPosition - mFirstPosition);
if (child != null) positionSelector(child);
} else {
mSelectedTop = 0;
mSelectorRect.setEmpty();
}
// even if there is not selected position, we may need to restore
// focus (i.e. something focusable in touch mode)
if (hasFocus() && focusLayoutRestoreView != null) {
focusLayoutRestoreView.requestFocus();
}
}
// tell focus view we are done mucking with it, if it is still in
// our view hierarchy.
if (focusLayoutRestoreView != null
&& focusLayoutRestoreView.getWindowToken() != null) {
focusLayoutRestoreView.onFinishTemporaryDetach();
}
mLayoutMode = LAYOUT_NORMAL;
mDataChanged = false;
mNeedSync = false;
setNextSelectedPositionInt(mSelectedPosition);
updateScrollIndicators();
if (mItemCount > 0) {
checkSelectionChanged();
}
invokeOnItemScrollListener();
} finally {
if (!blockLayoutRequests) {
mBlockLayoutRequests = false;
}
}
}同样还是在第19行，调用getChildCount()方法来获取子View的数量，只不过现在得到的值不会再是0了，而是ListView中一屏可以显示的子View数量，因为我们刚刚在第一次Layout过程当中向ListView添加了这么多的子View。下面在第90行调用了RecycleBin的fillActiveViews()方法，这次效果可就不一样了，因为目前ListView中已经有子View了，这样所有的子View都会被缓存到RecycleBin的mActiveViews数组当中，后面将会用到它们。
接下来将会是非常非常重要的一个操作，在第113行调用了detachAllViewsFromParent()方法。这个方法会将所有ListView当中的子View全部清除掉，从而保证第二次Layout过程不会产生一份重复的数据。那有的朋友可能会问了，这样把已经加载好的View又清除掉，待会还要再重新加载一遍，这不是严重影响效率吗？不用担心，还记得我们刚刚调用了RecycleBin的fillActiveViews()方法来缓存子View吗，待会儿将会直接使用这些缓存好的View来进行加载，而并不会重新执行一遍inflate过程，因此效率方面并不会有什么明显的影响。
那么我们接着看，在第141行的判断逻辑当中，由于不再等于0了，因此会进入到else语句当中。而else语句中又有三个逻辑判断，第一个逻辑判断不成立，因为默认情况下我们没有选中任何子元素，mSelectedPosition应该等于-1。第二个逻辑判断通常是成立的，因为mFirstPosition的值一开始是等于0的，只要adapter中的数据大于0条件就成立。那么进入到fillSpecific()方法当中，代码如下所示：
/**
* Put a specific item at a specific location on the screen and then build
* up and down from there.
*
* @param position The reference view to use as the starting point
* @param top Pixel offset from the top of this view to the top of the
* reference view.
*
* @return The selected view, or null if the selected view is outside the
* visible area.
*/
private View fillSpecific(int position, int top) {
boolean tempIsSelected = position == mSelectedPosition;
View temp = makeAndAddView(position, top, true, mListPadding.left, tempIsSelected);
// Possibly changed again in fillUp if we add rows above this one.
mFirstPosition = position;
View above;
View below;
final int dividerHeight = mDividerHeight;
if (!mStackFromBottom) {
above = fillUp(position - 1, temp.getTop() - dividerHeight);
// This will correct for the top of the first view not touching the top of the list
adjustViewsUpOrDown();
below = fillDown(position + 1, temp.getBottom() + dividerHeight);
int childCount = getChildCount();
if (childCount > 0) {
correctTooHigh(childCount);
}
} else {
below = fillDown(position + 1, temp.getBottom() + dividerHeight);
// This will correct for the bottom of the last view not touching the bottom of the list
adjustViewsUpOrDown();
above = fillUp(position - 1, temp.getTop() - dividerHeight);
int childCount = getChildCount();
if (childCount > 0) {
correctTooLow(childCount);
}
}
if (tempIsSelected) {
return temp;
} else if (above != null) {
return above;
} else {
return below;
}
}fillSpecific()这算是一个新方法了，不过其实它和fillUp()、fillDown()方法功能也是差不多的，主要的区别在于，fillSpecific()方法会优先将指定位置的子View先加载到屏幕上，然后再加载该子View往上以及往下的其它子View。那么由于这里我们传入的position就是第一个子View的位置，于是fillSpecific()方法的作用就基本上和fillDown()方法是差不多的了，这里我们就不去关注太多它的细节，而是将精力放在makeAndAddView()方法上面。再次回到makeAndAddView()方法，代码如下所示：
/**
* Obtain the view and add it to our list of children. The view can be made
* fresh, converted from an unused view, or used as is if it was in the
* recycle bin.
*
* @param position Logical position in the list
* @param y Top or bottom edge of the view to add
* @param flow If flow is true, align top edge to y. If false, align bottom
* edge to y.
* @param childrenLeft Left edge where children should be positioned
* @param selected Is this position selected?
* @return View that was added
*/
private View makeAndAddView(int position, int y, boolean flow, int childrenLeft,
boolean selected) {
View child;
if (!mDataChanged) {
// Try to use an exsiting view for this position
child = mRecycler.getActiveView(position);
if (child != null) {
// Found it -- we're using an existing child
// This just needs to be positioned
setupChild(child, position, y, flow, childrenLeft, selected, true);
return child;
}
}
// Make a new view for this position, or convert an unused view if possible
child = obtainView(position, mIsScrap);
// This needs to be positioned and measured
setupChild(child, position, y, flow, childrenLeft, selected, mIsScrap[0]);
return child;
}仍然还是在第19行尝试从RecycleBin当中获取Active View，然而这次就一定可以获取到了，因为前面我们调用了RecycleBin的fillActiveViews()方法来缓存子View。那么既然如此，就不会再进入到第28行的obtainView()方法，而是会直接进入setupChild()方法当中，这样也省去了很多时间，因为如果在obtainView()方法中又要去infalte布局的话，那么ListView的初始加载效率就大大降低了。
注意在第23行，setupChild()方法的最后一个参数传入的是true，这个参数表明当前的View是之前被回收过的，那么我们再次回到setupChild()方法当中：
/**
* Add a view as a child and make sure it is measured (if necessary) and
* positioned properly.
*
* @param child The view to add
* @param position The position of this child
* @param y The y position relative to which this view will be positioned
* @param flowDown If true, align top edge to y. If false, align bottom
* edge to y.
* @param childrenLeft Left edge where children should be positioned
* @param selected Is this position selected?
* @param recycled Has this view been pulled from the recycle bin? If so it
* does not need to be remeasured.
*/
private void setupChild(View child, int position, int y, boolean flowDown, int childrenLeft,
boolean selected, boolean recycled) {
final boolean isSelected = selected && shouldShowSelector();
final boolean updateChildSelected = isSelected != child.isSelected();
final int mode = mTouchMode;
final boolean isPressed = mode > TOUCH_MODE_DOWN && mode < TOUCH_MODE_SCROLL &&
mMotionPosition == position;
final boolean updateChildPressed = isPressed != child.isPressed();
final boolean needToMeasure = !recycled || updateChildSelected || child.isLayoutRequested();
// Respect layout params that are already in the view. Otherwise make some up...
// noinspection unchecked
AbsListView.LayoutParams p = (AbsListView.LayoutParams) child.getLayoutParams();
if (p == null) {
p = new AbsListView.LayoutParams(ViewGroup.LayoutParams.MATCH_PARENT,
ViewGroup.LayoutParams.WRAP_CONTENT, 0);
}
p.viewType = mAdapter.getItemViewType(position);
if ((recycled && !p.forceAdd) || (p.recycledHeaderFooter &&
p.viewType == AdapterView.ITEM_VIEW_TYPE_HEADER_OR_FOOTER)) {
attachViewToParent(child, flowDown ? -1 : 0, p);
} else {
p.forceAdd = false;
if (p.viewType == AdapterView.ITEM_VIEW_TYPE_HEADER_OR_FOOTER) {
p.recycledHeaderFooter = true;
}
addViewInLayout(child, flowDown ? -1 : 0, p, true);
}
if (updateChildSelected) {
child.setSelected(isSelected);
}
if (updateChildPressed) {
child.setPressed(isPressed);
}
if (needToMeasure) {
int childWidthSpec = ViewGroup.getChildMeasureSpec(mWidthMeasureSpec,
mListPadding.left + mListPadding.right, p.width);
int lpHeight = p.height;
int childHeightSpec;
if (lpHeight > 0) {
childHeightSpec = MeasureSpec.makeMeasureSpec(lpHeight, MeasureSpec.EXACTLY);
} else {
childHeightSpec = MeasureSpec.makeMeasureSpec(0, MeasureSpec.UNSPECIFIED);
}
child.measure(childWidthSpec, childHeightSpec);
} else {
cleanupLayoutState(child);
}
final int w = child.getMeasuredWidth();
final int h = child.getMeasuredHeight();
final int childTop = flowDown ? y : y - h;
if (needToMeasure) {
final int childRight = childrenLeft + w;
final int childBottom = childTop + h;
child.layout(childrenLeft, childTop, childRight, childBottom);
} else {
child.offsetLeftAndRight(childrenLeft - child.getLeft());
child.offsetTopAndBottom(childTop - child.getTop());
}
if (mCachingStarted && !child.isDrawingCacheEnabled()) {
child.setDrawingCacheEnabled(true);
}
}可以看到，setupChild()方法的最后一个参数是recycled，然后在第32行会对这个变量进行判断，由于recycled现在是true，所以会执行attachViewToParent()方法，而第一次Layout过程则是执行的else语句中的addViewInLayout()方法。这两个方法最大的区别在于，如果我们需要向ViewGroup中添加一个新的子View，应该调用addViewInLayout()方法，而如果是想要将一个之前detach的View重新attach到ViewGroup上，就应该调用attachViewToParent()方法。那么由于前面在layoutChildren()方法当中调用了detachAllViewsFromParent()方法，这样ListView中所有的子View都是处于detach状态的，所以这里attachViewToParent()方法是正确的选择。
经历了这样一个detach又attach的过程，ListView中所有的子View又都可以正常显示出来了，那么第二次Layout过程结束。
滑动加载更多数据
经历了两次Layout过程，虽说我们已经可以在ListView中看到内容了，然而关于ListView最神奇的部分我们却还没有接触到，因为目前ListView中只是加载并显示了第一屏的数据而已。比如说我们的Adapter当中有1000条数据，但是第一屏只显示了10条，ListView中也只有10个子View而已，那么剩下的990是怎样工作并显示到界面上的呢？这就要看一下ListView滑动部分的源码了，因为我们是通过手指滑动来显示更多数据的。
由于滑动部分的机制是属于通用型的，即ListView和GridView都会使用同样的机制，因此这部分代码就肯定是写在AbsListView当中的了。那么监听触控事件是在onTouchEvent()方法当中进行的，我们就来看一下AbsListView中的这个方法：
@Override
public boolean onTouchEvent(MotionEvent ev) {
if (!isEnabled()) {
// A disabled view that is clickable still consumes the touch
// events, it just doesn't respond to them.
return isClickable() || isLongClickable();
}
final int action = ev.getAction();
View v;
int deltaY;
if (mVelocityTracker == null) {
mVelocityTracker = VelocityTracker.obtain();
}
mVelocityTracker.addMovement(ev);
switch (action & MotionEvent.ACTION_MASK) {
case MotionEvent.ACTION_DOWN: {
mActivePointerId = ev.getPointerId(0);
final int x = (int) ev.getX();
final int y = (int) ev.getY();
int motionPosition = pointToPosition(x, y);
if (!mDataChanged) {
if ((mTouchMode != TOUCH_MODE_FLING) && (motionPosition >= 0)
&& (getAdapter().isEnabled(motionPosition))) {
// User clicked on an actual view (and was not stopping a
// fling). It might be a
// click or a scroll. Assume it is a click until proven
// otherwise
mTouchMode = TOUCH_MODE_DOWN;
// FIXME Debounce
if (mPendingCheckForTap == null) {
mPendingCheckForTap = new CheckForTap();
}
postDelayed(mPendingCheckForTap, ViewConfiguration.getTapTimeout());
} else {
if (ev.getEdgeFlags() != 0 && motionPosition < 0) {
// If we couldn't find a view to click on, but the down
// event was touching
// the edge, we will bail out and try again. This allows
// the edge correcting
// code in ViewRoot to try to find a nearby view to
// select
return false;
}
if (mTouchMode == TOUCH_MODE_FLING) {
// Stopped a fling. It is a scroll.
createScrollingCache();
mTouchMode = TOUCH_MODE_SCROLL;
mMotionCorrection = 0;
motionPosition = findMotionRow(y);
reportScrollStateChange(OnScrollListener.SCROLL_STATE_TOUCH_SCROLL);
}
}
}
if (motionPosition >= 0) {
// Remember where the motion event started
v = getChildAt(motionPosition - mFirstPosition);
mMotionViewOriginalTop = v.getTop();
}
mMotionX = x;
mMotionY = y;
mMotionPosition = motionPosition;
mLastY = Integer.MIN_VALUE;
break;
}
case MotionEvent.ACTION_MOVE: {
final int pointerIndex = ev.findPointerIndex(mActivePointerId);
final int y = (int) ev.getY(pointerIndex);
deltaY = y - mMotionY;
switch (mTouchMode) {
case TOUCH_MODE_DOWN:
case TOUCH_MODE_TAP:
case TOUCH_MODE_DONE_WAITING:
// Check if we have moved far enough that it looks more like a
// scroll than a tap
startScrollIfNeeded(deltaY);
break;
case TOUCH_MODE_SCROLL:
if (PROFILE_SCROLLING) {
if (!mScrollProfilingStarted) {
Debug.startMethodTracing("AbsListViewScroll");
mScrollProfilingStarted = true;
}
}
if (y != mLastY) {
deltaY -= mMotionCorrection;
int incrementalDeltaY = mLastY != Integer.MIN_VALUE ? y - mLastY : deltaY;
// No need to do all this work if we're not going to move
// anyway
boolean atEdge = false;
if (incrementalDeltaY != 0) {
atEdge = trackMotionScroll(deltaY, incrementalDeltaY);
}
// Check to see if we have bumped into the scroll limit
if (atEdge && getChildCount() > 0) {
// Treat this like we're starting a new scroll from the
// current
// position. This will let the user start scrolling back
// into
// content immediately rather than needing to scroll
// back to the
// point where they hit the limit first.
int motionPosition = findMotionRow(y);
if (motionPosition >= 0) {
final View motionView = getChildAt(motionPosition - mFirstPosition);
mMotionViewOriginalTop = motionView.getTop();
}
mMotionY = y;
mMotionPosition = motionPosition;
invalidate();
}
mLastY = y;
}
break;
}
break;
}
case MotionEvent.ACTION_UP: {
switch (mTouchMode) {
case TOUCH_MODE_DOWN:
case TOUCH_MODE_TAP:
case TOUCH_MODE_DONE_WAITING:
final int motionPosition = mMotionPosition;
final View child = getChildAt(motionPosition - mFirstPosition);
if (child != null && !child.hasFocusable()) {
if (mTouchMode != TOUCH_MODE_DOWN) {
child.setPressed(false);
}
if (mPerformClick == null) {
mPerformClick = new PerformClick();
}
final AbsListView.PerformClick performClick = mPerformClick;
performClick.mChild = child;
performClick.mClickMotionPosition = motionPosition;
performClick.rememberWindowAttachCount();
mResurrectToPosition = motionPosition;
if (mTouchMode == TOUCH_MODE_DOWN || mTouchMode == TOUCH_MODE_TAP) {
final Handler handler = getHandler();
if (handler != null) {
handler.removeCallbacks(mTouchMode == TOUCH_MODE_DOWN ? mPendingCheckForTap
: mPendingCheckForLongPress);
}
mLayoutMode = LAYOUT_NORMAL;
if (!mDataChanged && mAdapter.isEnabled(motionPosition)) {
mTouchMode = TOUCH_MODE_TAP;
setSelectedPositionInt(mMotionPosition);
layoutChildren();
child.setPressed(true);
positionSelector(child);
setPressed(true);
if (mSelector != null) {
Drawable d = mSelector.getCurrent();
if (d != null && d instanceof TransitionDrawable) {
((TransitionDrawable) d).resetTransition();
}
}
postDelayed(new Runnable() {
public void run() {
child.setPressed(false);
setPressed(false);
if (!mDataChanged) {
post(performClick);
}
mTouchMode = TOUCH_MODE_REST;
}
}, ViewConfiguration.getPressedStateDuration());
} else {
mTouchMode = TOUCH_MODE_REST;
}
return true;
} else if (!mDataChanged && mAdapter.isEnabled(motionPosition)) {
post(performClick);
}
}
mTouchMode = TOUCH_MODE_REST;
break;
case TOUCH_MODE_SCROLL:
final int childCount = getChildCount();
if (childCount > 0) {
if (mFirstPosition == 0
&& getChildAt(0).getTop() >= mListPadding.top
&& mFirstPosition + childCount < mItemCount
&& getChildAt(childCount - 1).getBottom() <= getHeight()
- mListPadding.bottom) {
mTouchMode = TOUCH_MODE_REST;
reportScrollStateChange(OnScrollListener.SCROLL_STATE_IDLE);
} else {
final VelocityTracker velocityTracker = mVelocityTracker;
velocityTracker.computeCurrentVelocity(1000, mMaximumVelocity);
final int initialVelocity = (int) velocityTracker
.getYVelocity(mActivePointerId);
if (Math.abs(initialVelocity) > mMinimumVelocity) {
if (mFlingRunnable == null) {
mFlingRunnable = new FlingRunnable();
}
reportScrollStateChange(OnScrollListener.SCROLL_STATE_FLING);
mFlingRunnable.start(-initialVelocity);
} else {
mTouchMode = TOUCH_MODE_REST;
reportScrollStateChange(OnScrollListener.SCROLL_STATE_IDLE);
}
}
} else {
mTouchMode = TOUCH_MODE_REST;
reportScrollStateChange(OnScrollListener.SCROLL_STATE_IDLE);
}
break;
}
setPressed(false);
// Need to redraw since we probably aren't drawing the selector
// anymore
invalidate();
final Handler handler = getHandler();
if (handler != null) {
handler.removeCallbacks(mPendingCheckForLongPress);
}
if (mVelocityTracker != null) {
mVelocityTracker.recycle();
mVelocityTracker = null;
}
mActivePointerId = INVALID_POINTER;
if (PROFILE_SCROLLING) {
if (mScrollProfilingStarted) {
Debug.stopMethodTracing();
mScrollProfilingStarted = false;
}
}
break;
}
case MotionEvent.ACTION_CANCEL: {
mTouchMode = TOUCH_MODE_REST;
setPressed(false);
View motionView = this.getChildAt(mMotionPosition - mFirstPosition);
if (motionView != null) {
motionView.setPressed(false);
}
clearScrollingCache();
final Handler handler = getHandler();
if (handler != null) {
handler.removeCallbacks(mPendingCheckForLongPress);
}
if (mVelocityTracker != null) {
mVelocityTracker.recycle();
mVelocityTracker = null;
}
mActivePointerId = INVALID_POINTER;
break;
}
case MotionEvent.ACTION_POINTER_UP: {
onSecondaryPointerUp(ev);
final int x = mMotionX;
final int y = mMotionY;
final int motionPosition = pointToPosition(x, y);
if (motionPosition >= 0) {
// Remember where the motion event started
v = getChildAt(motionPosition - mFirstPosition);
mMotionViewOriginalTop = v.getTop();
mMotionPosition = motionPosition;
}
mLastY = y;
break;
}
}
return true;
}这个方法中的代码就非常多了，因为它所处理的逻辑也非常多，要监听各种各样的触屏事件。但是我们目前所关心的就只有手指在屏幕上滑动这一个事件而已，对应的是ACTION_MOVE这个动作，那么我们就只看这部分代码就可以了。
可以看到，ACTION_MOVE这个case里面又嵌套了一个switch语句，是根据当前的TouchMode来选择的。那这里我可以直接告诉大家，当手指在屏幕上滑动时，TouchMode是等于TOUCH_MODE_SCROLL这个值的，至于为什么那又要牵扯到另外的好几个方法，这里限于篇幅原因就不再展开讲解了，喜欢寻根究底的朋友们可以自己去源码里找一找原因。
这样的话，代码就应该会走到第78行的这个case里面去了，在这个case当中并没有什么太多需要注意的东西，唯一一点非常重要的就是第92行调用的trackMotionScroll()方法，相当于我们手指只要在屏幕上稍微有一点点移动，这个方法就会被调用，而如果是正常在屏幕上滑动的话，那么这个方法就会被调用很多次。那么我们进入到这个方法中瞧一瞧，代码如下所示：
boolean trackMotionScroll(int deltaY, int incrementalDeltaY) {
final int childCount = getChildCount();
if (childCount == 0) {
return true;
}
final int firstTop = getChildAt(0).getTop();
final int lastBottom = getChildAt(childCount - 1).getBottom();
final Rect listPadding = mListPadding;
final int spaceAbove = listPadding.top - firstTop;
final int end = getHeight() - listPadding.bottom;
final int spaceBelow = lastBottom - end;
final int height = getHeight() - getPaddingBottom() - getPaddingTop();
if (deltaY < 0) {
deltaY = Math.max(-(height - 1), deltaY);
} else {
deltaY = Math.min(height - 1, deltaY);
}
if (incrementalDeltaY < 0) {
incrementalDeltaY = Math.max(-(height - 1), incrementalDeltaY);
} else {
incrementalDeltaY = Math.min(height - 1, incrementalDeltaY);
}
final int firstPosition = mFirstPosition;
if (firstPosition == 0 && firstTop >= listPadding.top && deltaY >= 0) {
// Don't need to move views down if the top of the first position
// is already visible
return true;
}
if (firstPosition + childCount == mItemCount && lastBottom <= end && deltaY <= 0) {
// Don't need to move views up if the bottom of the last position
// is already visible
return true;
}
final boolean down = incrementalDeltaY < 0;
final boolean inTouchMode = isInTouchMode();
if (inTouchMode) {
hideSelector();
}
final int headerViewsCount = getHeaderViewsCount();
final int footerViewsStart = mItemCount - getFooterViewsCount();
int start = 0;
int count = 0;
if (down) {
final int top = listPadding.top - incrementalDeltaY;
for (int i = 0; i < childCount; i++) {
final View child = getChildAt(i);
if (child.getBottom() >= top) {
break;
} else {
count++;
int position = firstPosition + i;
if (position >= headerViewsCount && position < footerViewsStart) {
mRecycler.addScrapView(child);
}
}
}
} else {
final int bottom = getHeight() - listPadding.bottom - incrementalDeltaY;
for (int i = childCount - 1; i >= 0; i--) {
final View child = getChildAt(i);
if (child.getTop() <= bottom) {
break;
} else {
start = i;
count++;
int position = firstPosition + i;
if (position >= headerViewsCount && position < footerViewsStart) {
mRecycler.addScrapView(child);
}
}
}
}
mMotionViewNewTop = mMotionViewOriginalTop + deltaY;
mBlockLayoutRequests = true;
if (count > 0) {
detachViewsFromParent(start, count);
}
offsetChildrenTopAndBottom(incrementalDeltaY);
if (down) {
mFirstPosition += count;
}
invalidate();
final int absIncrementalDeltaY = Math.abs(incrementalDeltaY);
if (spaceAbove < absIncrementalDeltaY || spaceBelow < absIncrementalDeltaY) {
fillGap(down);
}
if (!inTouchMode && mSelectedPosition != INVALID_POSITION) {
final int childIndex = mSelectedPosition - mFirstPosition;
if (childIndex >= 0 && childIndex < getChildCount()) {
positionSelector(getChildAt(childIndex));
}
}
mBlockLayoutRequests = false;
invokeOnItemScrollListener();
awakenScrollBars();
return false;
}这个方法接收两个参数，deltaY表示从手指按下时的位置到当前手指位置的距离，incrementalDeltaY则表示据上次触发event事件手指在Y方向上位置的改变量，那么其实我们就可以通过incrementalDeltaY的正负值情况来判断用户是向上还是向下滑动的了。如第34行代码所示，如果incrementalDeltaY小于0，说明是向下滑动，否则就是向上滑动。
下面将会进行一个边界值检测的过程，可以看到，从第43行开始，当ListView向下滑动的时候，就会进入一个for循环当中，从上往下依次获取子View，第47行当中，如果该子View的bottom值已经小于top值了，就说明这个子View已经移出屏幕了，所以会调用RecycleBin的addScrapView()方法将这个View加入到废弃缓存当中，并将count计数器加1，计数器用于记录有多少个子View被移出了屏幕。那么如果是ListView向上滑动的话，其实过程是基本相同的，只不过变成了从下往上依次获取子View，然后判断该子View的top值是不是大于bottom值了，如果大于的话说明子View已经移出了屏幕，同样把它加入到废弃缓存中，并将计数器加1。
接下来在第76行，会根据当前计数器的值来进行一个detach操作，它的作用就是把所有移出屏幕的子View全部detach掉，在ListView的概念当中，所有看不到的View就没有必要为它进行保存，因为屏幕外还有成百上千条数据等着显示呢，一个好的回收策略才能保证ListView的高性能和高效率。紧接着在第78行调用了offsetChildrenTopAndBottom()方法，并将incrementalDeltaY作为参数传入，这个方法的作用是让ListView中所有的子View都按照传入的参数值进行相应的偏移，这样就实现了随着手指的拖动，ListView的内容也会随着滚动的效果。
然后在第84行会进行判断，如果ListView中最后一个View的底部已经移入了屏幕，或者ListView中第一个View的顶部移入了屏幕，就会调用fillGap()方法，那么因此我们就可以猜出fillGap()方法是用来加载屏幕外数据的，进入到这个方法中瞧一瞧，如下所示：
/** * Fills the gap left open by a touch-scroll. During a touch scroll, * children that remain on screen are shifted and the other ones are * discarded. The role of this method is to fill the gap thus created by * performing a partial layout in the empty space. * * @param down * true if the scroll is going down, false if it is going up */ abstract void fillGap(boolean down);
OK，AbsListView中的fillGap()是一个抽象方法，那么我们立刻就能够想到，它的具体实现肯定是在ListView中完成的了。回到ListView当中，fillGap()方法的代码如下所示：
void fillGap(boolean down) {
final int count = getChildCount();
if (down) {
final int startOffset = count > 0 ? getChildAt(count - 1).getBottom() + mDividerHeight :
getListPaddingTop();
fillDown(mFirstPosition + count, startOffset);
correctTooHigh(getChildCount());
} else {
final int startOffset = count > 0 ? getChildAt(0).getTop() - mDividerHeight :
getHeight() - getListPaddingBottom();
fillUp(mFirstPosition - 1, startOffset);
correctTooLow(getChildCount());
}
}down参数用于表示ListView是向下滑动还是向上滑动的，可以看到，如果是向下滑动的话就会调用fillDown()方法，而如果是向上滑动的话就会调用fillUp()方法。那么这两个方法我们都已经非常熟悉了，内部都是通过一个循环来去对ListView进行填充，所以这两个方法我们就不看了，但是填充ListView会通过调用makeAndAddView()方法来完成，又是makeAndAddView()方法，但这次的逻辑再次不同了，所以我们还是回到这个方法瞧一瞧：
/**
* Obtain the view and add it to our list of children. The view can be made
* fresh, converted from an unused view, or used as is if it was in the
* recycle bin.
*
* @param position Logical position in the list
* @param y Top or bottom edge of the view to add
* @param flow If flow is true, align top edge to y. If false, align bottom
* edge to y.
* @param childrenLeft Left edge where children should be positioned
* @param selected Is this position selected?
* @return View that was added
*/
private View makeAndAddView(int position, int y, boolean flow, int childrenLeft,
boolean selected) {
View child;
if (!mDataChanged) {
// Try to use an exsiting view for this position
child = mRecycler.getActiveView(position);
if (child != null) {
// Found it -- we're using an existing child
// This just needs to be positioned
setupChild(child, position, y, flow, childrenLeft, selected, true);
return child;
}
}
// Make a new view for this position, or convert an unused view if possible
child = obtainView(position, mIsScrap);
// This needs to be positioned and measured
setupChild(child, position, y, flow, childrenLeft, selected, mIsScrap[0]);
return child;
}不管怎么说，这里首先仍然是会尝试调用RecycleBin的getActiveView()方法来获取子布局，只不过肯定是获取不到的了，因为在第二次Layout过程中我们已经从mActiveViews中获取过了数据，而根据RecycleBin的机制，mActiveViews是不能够重复利用的，因此这里返回的值肯定是null。
既然getActiveView()方法返回的值是null，那么就还是会走到第28行的obtainView()方法当中，代码如下所示：
/**
* Get a view and have it show the data associated with the specified
* position. This is called when we have already discovered that the view is
* not available for reuse in the recycle bin. The only choices left are
* converting an old view or making a new one.
*
* @param position
* The position to display
* @param isScrap
* Array of at least 1 boolean, the first entry will become true
* if the returned view was taken from the scrap heap, false if
* otherwise.
*
* @return A view displaying the data associated with the specified position
*/
View obtainView(int position, boolean[] isScrap) {
isScrap[0] = false;
View scrapView;
scrapView = mRecycler.getScrapView(position);
View child;
if (scrapView != null) {
child = mAdapter.getView(position, scrapView, this);
if (child != scrapView) {
mRecycler.addScrapView(scrapView);
if (mCacheColorHint != 0) {
child.setDrawingCacheBackgroundColor(mCacheColorHint);
}
} else {
isScrap[0] = true;
dispatchFinishTemporaryDetach(child);
}
} else {
child = mAdapter.getView(position, null, this);
if (mCacheColorHint != 0) {
child.setDrawingCacheBackgroundColor(mCacheColorHint);
}
}
return child;
}这里在第19行会调用RecyleBin的getScrapView()方法来尝试从废弃缓存中获取一个View，那么废弃缓存有没有View呢？当然有，因为刚才在trackMotionScroll()方法中我们就已经看到了，一旦有任何子View被移出了屏幕，就会将它加入到废弃缓存中，而从obtainView()方法中的逻辑来看，一旦有新的数据需要显示到屏幕上，就会尝试从废弃缓存中获取View。所以它们之间就形成了一个生产者和消费者的模式，那么ListView神奇的地方也就在这里体现出来了，不管你有任意多条数据需要显示，ListView中的子View其实来来回回就那么几个，移出屏幕的子View会很快被移入屏幕的数据重新利用起来，因而不管我们加载多少数据都不会出现OOM的情况，甚至内存都不会有所增加。
那么另外还有一点是需要大家留意的，这里获取到了一个scrapView，然后我们在第22行将它作为第二个参数传入到了Adapter的getView()方法当中。那么第二个参数是什么意思呢？我们再次看一下一个简单的getView()方法示例：
@Override
public View getView(int position, View convertView, ViewGroup parent) {
Fruit fruit = getItem(position);
View view;
if (convertView == null) {
view = LayoutInflater.from(getContext()).inflate(resourceId, null);
} else {
view = convertView;
}
ImageView fruitImage = (ImageView) view.findViewById(R.id.fruit_image);
TextView fruitName = (TextView) view.findViewById(R.id.fruit_name);
fruitImage.setImageResource(fruit.getImageId());
fruitName.setText(fruit.getName());
return view;
}第二个参数就是我们最熟悉的convertView呀，难怪平时我们在写getView()方法是要判断一下convertView是不是等于null，如果等于null才调用inflate()方法来加载布局，不等于null就可以直接利用convertView，因为convertView就是我们之间利用过的View，只不过被移出屏幕后进入到了废弃缓存中，现在又重新拿出来使用而已。然后我们只需要把convertView中的数据更新成当前位置上应该显示的数据，那么看起来就好像是全新加载出来的一个布局一样，这背后的道理你是不是已经完全搞明白了？
之后的代码又都是我们熟悉的流程了，从缓存中拿到子View之后再调用setupChild()方法将它重新attach到ListView当中，因为缓存中的View也是之前从ListView中detach掉的，这部分代码就不再重复进行分析了。
为了方便大家理解，这里我再附上一张图解说明：
那么到目前为止，我们就把ListView的整个工作流程代码基本分析结束了，文章比较长，希望大家可以理解清楚