電腦本地連線不見了怎麼恢復？

當電腦上的本地連線突然消失，令人不知所措。這個問題困擾了許多用戶，導致網路連線中斷。今天，php小編柚子將詳細探討本地連線消失的原因和解決方案。透過閱讀以下內容，您將了解如何快速恢復本機連接，解決網路連接問題，讓您的裝置重新正常運作。

一、電腦本地連線不見了怎麼恢復？

1、本地連線不見了（被設定隱藏如何恢復），滑鼠右鍵任務列－屬性。

2、調出工作列和選單屬性－自訂。

3、設定本地連線總是顯示。

4、還可以右鍵網上鄰居——屬性。

5、開啟網路連線。

6、右鍵本地連線——屬性。

7、在本機連線屬性對話方塊中，勾選連線後在通知區域顯示圖示。

8、另外，還可以右鍵我的電腦——裝置管理員。

9、重新掃描偵測硬體改動，如果是驅動問題，重新安裝網路卡驅動即可。

二、電腦本地連線不見瞭如何恢復？

電腦的本地連線突然消失，主要是電腦的網路卡或網路卡驅動出現問題。你可以使用以下的方法檢查解決：點擊桌面右鍵選擇打開，展開到下，展開右邊的查看一下有沒有網卡設備，或者網卡設備驅動有沒有出現嘆號，如果找不到網卡設備，可以點擊上方的圖標，掃描一下（通常如果是網卡驅動丟失或誤刪，掃描一下就會提示找到新硬體）如果掃描到網卡，就重新安裝一下網卡驅動器即可。

如果有顯示有網卡，但本地連接沒有的話，點擊網絡適配器下相應的網卡右鍵選擇，然後重啟電腦重新安裝一次網卡就可以了。如果以上的方法都試過了還是不行的話，那你的網路卡很可能就壞掉了。嘗試新增獨立網路卡解決。

三、電腦本地連線不見了.怎麼辦？

1，網卡損壞了解決方法：一般只有更換網卡或添加獨立網卡可以解決。

2，網路卡驅動未安裝的。可以下載個驅動精靈偵測一下，到時會有需要安裝的驅動程式提示。

3，找到裝置管理器，找到本地連接的網絡，更新一下網卡驅動的設定。或未啟用，把網卡設定也是可以的。

四、電腦本地連線不見了怎麼辦？

本地連線不見了（被設定隱藏如何恢復），滑鼠右鍵任務列－屬性。

2、調出工作列和選單屬性－自訂。

3、設定本地連線總是顯示。

4、還可以右鍵網上鄰居——屬性。

5、開啟網路連線。

6、右鍵本地連線——屬性。

7、在本機連線屬性對話方塊中，勾選連線後在通知區域顯示圖示。

8、另外，還可以右鍵我的電腦——裝置管理員。

9、重新掃描偵測硬體改動，如果是驅動問題，重新安裝網路卡驅動即可。

五、電腦本地連線突然消失不見了怎麼恢復？

電腦的本地連線突然消失，主要是電腦的網路卡或網路卡驅動出現問題。你可以使用以下的方法檢查解決：點擊桌面右鍵選擇打開，展開到下，展開右邊的查看一下有沒有網卡設備，或者網卡設備驅動有沒有出現嘆號，如果找不到網卡設備，可以點擊上方的圖標，掃描一下（通常如果是網卡驅動丟失或誤刪，掃描一下就會提示找到新硬體）如果掃描到網卡，就重新安裝一下網卡驅動器即可。

如果有顯示有網卡，但本地連接沒有的話，點擊網絡適配器下相應的網卡右鍵選擇，然後重啟電腦重新安裝一次網卡就可以了。如果以上的方法都試過了還是不行的話，那你的網路卡很可能就壞掉了。嘗試新增獨立網路卡解決。

六、電腦設定網路本地連線

電腦設定網路本地連線

網路設定的重要性

在現代社會中，電腦已經成為了我們生活中不可或缺的一部分。無論是工作還是娛樂，我們都需要依賴網路來獲取資訊、進行溝通等。然而，要確保我們電腦的網路連線暢通無阻，就需要進行電腦設定網路本地連線。

網路設定是指針對電腦的網路連線進行配置、調整和最佳化，以確保我們能夠順利地與網路進行通訊。在進行網路設定之前，我們需要了解電腦的網路本地連線是什麼。

網路本地連線的概念

網路本地連線是指電腦與區域網路或廣域網路之間建立的連線。它是透過網路線或無線網路設備將電腦與路由器或數據機相連，以實現與網際網路的通訊。網路本地連接起到了電子設備與網路之間的橋樑作用。

To configure Network Local Connection, we need to perform the following steps:

1. Selection of network adapter

Before setting up Network Local Connection, we need to confirm that the network adapter of the computer is correct. Normally, the computer will automatically select the appropriate network adapter, but sometimes we also need to set it manually.

2. Network protocol configuration

Network protocol is a specification that determines how our computers communicate with the Internet. When setting up the network, we need to select the appropriate network protocol and configure the corresponding parameters. Common network protocols include TCP/IP protocol, DNS protocol, etc.

3. IP address configuration

The IP address is the unique identifier of our computer on the network. When setting up the network, we need to assign a suitable IP address to the computer. IP addresses are usually provided by a network service provider or dynamically assigned by a DHCP server.

4. Subnet mask setting

A subnet mask is an identifier used to divide a network. When setting up the network, we need to set an appropriate subnet mask to ensure that the computer and other devices can communicate normally.

5. Configuration of gateway and DNS server

Gateway and DNS server are important parts of the communication between the computer and the Internet. When setting up the network, we need to configure the computer's gateway and DNS server addresses to ensure that the computer can access the Internet normally.

Network settings are a very important part of computer use. Only by ensuring that the network settings are correct can the computer communicate with the Internet smoothly. If the network settings are incorrect, it may cause problems such as unstable network connection and inability to access the Internet.

Correctly setting up the local network connection on the computer can improve the network speed and stability of our computers, and improve our work efficiency and quality of life.

Summary:

Setting up a local network connection on your computer is an important step to ensure smooth communication between your computer and the Internet. By properly configuring the computer's network adapter, network protocol, IP address, subnet mask, gateway, and DNS server, we can ensure that the computer can communicate with the Internet smoothly. The correctness of the network settings directly affects the network speed and stability of the computer. Therefore, we should pay attention to the network settings and follow the correct setting steps to improve our work efficiency and quality of life.

7. What should I do if the local connection is missing (local connection is disabled)?

1. Click the network connection icon in the taskbar in the lower right corner and select "Network and Sharing Center" in the pop-up menu.

2. After opening the Network and Sharing Center window, click "Change Adapter Settings" on the left.

3. In the window that opens, all available network connection methods of the computer are displayed (such as local connection, broadband connection, wireless network connection, etc.). You will find that local area connection is disabled.

4. Right-click the local area connection icon and select "Enable" in the drop-down menu.

5. It only takes a short time to wait for the system to enable local connection.

6. After enabling local connection, return to the Network and Sharing Center window and it will show that the computer is in local connection status.

8. The local connection is missing. Is there any solution for the local connection?

Method 1:

If you cannot access the Internet normally and there is a problem that the local connection is lost, you should consider the driver problem. The network card driver is not installed or is damaged, which may cause the local connection to be lost.

1. On our computer desktop, right-click this computer and select Manage. After entering the management interface, click Device Manager.

2. In the second step, after entering the device manager, click on the network adapter and check whether the network card driver "Realtek PCle GBE Family Controller" has a yellow exclamation mark and whether it is disabled.

3. If a yellow exclamation mark appears on the network card driver, right-click the mouse to update the driver. You can also update it through some driver software. If the network card driver is disabled, just enable it.

Method 2:

If you can access the Internet normally, but the local area connection icon is not displayed:

Open Start - Network Connections - Show All Connections, find the "Local Area Connection" icon, right-click - Properties, and select " "Show the icon in the notification area after connecting" can solve the problem of missing local connection.

9. How to connect the computer to the desktop computer locally?

1. Step 1. Find the "Network Connection" icon on the desktop, open it, and then click the "Create a New Connection" button on the network task on the left.

2. Step 2. Then the New Connection Wizard window pops up. Click Next. On the next window, select "Connect to the Internet" and click Next.

3. Step 3. Continue to select the "Options from Internet Service Provider (ISP) List" option on the window and click Next.

4. Step 4. Finally, the completion of the new connection wizard window is displayed. Click "Finish" to complete the creation of the new local connection.

5. Of course, after creating a local connection, you need to perform some gateway and dns settings to connect to the network. There is an INTERNET access icon in the lower right corner of the screen to set it up.

10. The local connection disappears after being disabled. How can I find the local connection?

Network Center - Change adapters on the left - Local Area Connection and Wireless Connection. If it is not there, right-click on My Computer - Device Manager - Device List - Network Adapter to see if it is there. It is usually red? or yellow! .

以上是電腦本地連線不見了怎麼恢復？的詳細內容。更多資訊請關注PHP中文網其他相關文章！