全自動電腦剝線機如何使用？

全自動電腦剝線機操作繁瑣，不少人對此一籌莫展。 php小編子墨特此帶來詳細的機器使用指南，從開機、送料到剝線，手把手教你輕鬆上手。如果你也對全自動電腦剝線機的操作方法感興趣，那就快快繼續閱讀吧！

一、全自動電腦剝線機如何使用？

全自動電腦剝線機是一種線束加工設備，使用時請注意三點：確保工作電源符合機器的要求。

依照機器性能選擇加工不同的線纜，否則會造成加工不良已經不可預知的機器故障請定期給刀架、線輪以及軸承部分進行加潤滑油，確保能夠長期穩定的使用

二、電腦剝線機的故障解決？

1、顯示出現「Err01」 ：電線切幾根自動停機，出線輪的間隙過大。

解決方法：出線輪先夾住一條電線，調整出線輪間隙旋鈕往下旋，旋至出線輪處的斷線燈滅，再向下旋2格數字。

2、按運轉一次馬上停機顯示「Err02」：線截面相對太粗，速度太快。

解決方法：調節速度變慢再試；電壓不足，需加獨立的穩壓電源；刀頭感測器有灰塵或刀頭感測定位鐵片變位，需清理或鐵片重新定位。

3、運作無聲出現「Err02」：保險管斷。

解決方法：更換再試，如果又斷，需更換其中一塊驅動板。

三、電腦全自動剝線機暫停時間怎麼調？

電腦全自動剝線機的暫停時間調節方法可能會因不同的機型和品牌而有所不同。一般而言，您可以透過以下步驟進行調整：

1. 查閱說明書：首先，您需要查閱剝線機的說明書，以了解具體的操作方法和調節方式。說明書通常會提供詳細的指導和步驟。

2. 進入設定介面：啟動剝線機，並找到相關的設定介面。這些介面可能位於機器的控制面板或是液晶顯示器上。

3. 尋找暫停時間選項：在設定介面中，尋找暫停時間調節選項。這通常會在剝線機的工作參數或高級設定中找到。有些機型可能會將暫停時間稱為「剝線間隔」或類似的名稱。

4. 調節暫停時間：依照您的需求，選擇適當的暫停時間。這個時間將決定剝線機在完成一次剝線後進行停頓的時間長度。您可以根據實際剝線需求進行調整。

5. 儲存設定：完成暫停時間調節後，依照說明書上的指導，將設定儲存。這通常需要按下確認鍵或其他指定的按鍵。

四、全自動電腦剝線機長度不穩定是什麼故障？

1、可能是送線的機構有問題，送線速度不穩定引起的。

2、也可能是設定參數有問題造成的。

3、送線的夾具有問題，造成送線長度不穩定。

五、全自動電腦剝線機不剪線不不前進怎麼調？

1、將刀口活動部位加機油，再試（一般每運轉8小時加油一次）。

2、將速度調慢，再試。

3、檢查導線的規格是否在本型號機型的請允許範圍以內。

4、刀片是否變鈍。

切線時切口傾斜

1、線材本身太彎，需理直。

2、線材口沒有正對刀口中心。放線架有卡滯現象，導致輸入線出現打滑現象。

部分線芯過長

六、電腦剝線機調試方法？

電腦剝線機是一種電子線材加工的機器，它的功能主要有裁線剝皮，電腦剝線機因為是電腦控制和程序，所以操作起來比較方便，蘇州興達機械是一家專業生產電腦剝線機，端子機的廠家，剝線機有XD-515,XD-200等電腦全自動剝線機；調試方法：插好電源，啟動機器，液晶顯示器上有種參數，你直接按照上面顯示參數設定就可以，例如，線長，剝皮長度，線徑刀值一目了然，我們用他們剝線機3年了還運行比較好；

七、全自動多功能電腦剝線機後剝不脫皮怎麼回事？

刀口沒有完全重合起來,就是零位開關感應到的時候兩個刀片之間還有縫隙,解決方法就是調一下零位開關的遮光片

八、全自動電腦絎縫機故障排除？

全自動電腦絎縫機故障的排除方法：

一：正常絎縫工作進行時出現絎縫機主軸運轉時不穩定(針距長短不穩定)；

二：正常工作縫製時快慢正常工作縫製時快慢不均衡；

三：電腦絎縫機變頻器顯示CAU；

四：電腦絎縫機變頻器顯示資料增減幅度為50至150；

五：設備正常縫製時不定時會有劃破表層布料的情況發生；

故障排除有以下幾種方式：

1：F6測試主軸轉速；

2：電腦絎縫機變頻器顯示資料增減幅度為每檔50~150或顯示CAU ；

3: Add a power regulator;

9. How to choose a computer wire stripping machine that suits you?

The function of computer wire stripping machine

The computer wire stripping machine is a device used to strip the insulation layer of wires. It can help users strip wires quickly and efficiently, improve work efficiency and reduce labor costs.

The key factors in choosing a computer wire stripping machine

When choosing a computer wire stripping machine that suits you, you need to consider the following key factors:

Wire stripping range: Different computer wire stripping machines are suitable for wires of different specifications and materials. Choose the model with appropriate wire stripping range according to your needs. Wire stripping accuracy: The precision of wire stripping is crucial to the quality of work. It is necessary to choose a computer wire stripping machine with high stripping accuracy, stability and reliability. Operation convenience: Considering the user-friendly interface and ease of operation of the equipment, training costs can be reduced and work efficiency improved. Safety performance: Safety is an important consideration when choosing a computer wire stripper, and it is necessary to ensure that the equipment has complete safety protection devices. After-sales service: Consider the after-sales service level of the equipment manufacturer, including maintenance, spare parts supply, etc.

Common types of computer wire stripping machines

According to their structure and working principle, common computer wire stripping machines can be divided into manual wire stripping machines, automatic wire stripping machines and semi-automatic wire stripping machines.

Manual wire stripping machine: Simple to operate, suitable for users with small amounts of wire stripping, but the work efficiency is low. Automatic wire stripping machine: suitable for users with large amounts of wire stripping and high requirements for stripping accuracy. It has high work efficiency, but the price is high. Semi-automatic wire stripping machine: combines the advantages of manual and automatic, suitable for users with medium wire stripping volume, and has high cost performance.

Common brand recommendations

Common computer wire stripping machine brands on the market include Jindu, Jiawei, Enke, etc. The products of these brands have certain advantages in terms of performance, quality and after-sales service, and can be used as a reference for selection.

When choosing a computer wire stripping machine, you need to consider factors such as wire stripping range, wire stripping accuracy, ease of operation, safety performance and after-sales service according to your own needs and budget, and choose a cost-effective one that suits your needs. equipment.

Thanks for reading this article, I hope it can help you better choose a computer wire stripping machine, improve work efficiency and reduce costs.

10. How to adjust the multiple stages of the fully automatic multi-functional wire stripping machine?

1. How to use the fully automatic wire stripping machine! 1. The wire is inserted from the wire inlet, passes through the wire inlet wheel, passes through the conduit and is placed on the knife edge;

2. Adjust the gap between the wire inlet wheels. Use the "wire inlet wheel gap adjustment wheel" to adjust the gap between the two wheels to be smaller than the wire that needs to be stripped. outer diameter, and ensure normal wire stripping;

3. Outgoing wire wheel gap adjustment: Use the "outgoing wire wheel gap adjustment wheel" to adjust the gap between the two wheels to be less than the outer diameter of the wire to be stripped, and adjust the disconnection indicator light to turn on and off. When in the critical state, rotate half a turn in the larger direction. If there are still knots in the wire and the machine stops, just adjust the gap a little smaller. 2. Precautions for safe use! In order to ensure that you can use the computer wire stripper safely and correctly, please read this instruction manual carefully before use. 1. In order to stabilize the working voltage of the machine, users are kindly requested to choose a power supply voltage regulator to avoid excessive voltage and burning out of the machine. 2. When in use, the machine should be placed on a flat and stable surface to avoid falling and damaging the machine. 3. Please do not use the machine near areas with strong electromagnetic fields to avoid interference to the machine.

4. Do not place any objects on the machine during use, and do not allow it to be close to corrosive chemicals. The working environment must be kept dry, ventilated, and dust-free. The working room temperature is: 0–35°C.

5. If the machine has unsatisfactory stripping results or malfunctions of varying degrees during use, please read the faults and troubleshooting methods in this instruction manual. If you still cannot solve the problem, please call our technical service hotline for maintenance. Method, for your own safety, please do not disassemble the machine for maintenance.

以上是全自動電腦剝線機如何使用？的詳細內容。更多資訊請關注PHP中文網其他相關文章！