이 글은 Asp.net 경영정보시스템의 데이터 통계 기능 구현 방법을 주로 소개하고 있으니 필요한 분들은 참고하시면 됩니다.
데이터 통계는 직장에서 리더들에게 통계 데이터를 보고할 때 꼭 필요한 기능입니다. 진행 데이터가 필요할 때 유용합니다.
제 생각에는 통계 모듈은 다음 기능을 구현해야 합니다.
일반적으로 사용되는 쿼리의 통계 결과를 표시할 수 있습니다.
표시되는 결과는 표 형식이나 그래픽 형식일 수 있습니다. 그래프이며 다양한 형태로 표시할 수 있습니다(막대 차트, 꺾은선형 차트, 파이 차트, 방사형 차트, 누적 막대 차트 등):
통계 쿼리 결과, 숫자나 백분율을 클릭하면 자세한 데이터가 표시됩니다.
-
쿼리 조건, 필터링 조건, 그룹화 조건, 정렬 등을 자유롭게 결합할 수 있습니다.
통계 결과를 실시간으로 미리 볼 수 있는 것이 가장 좋습니다. 다음 번에 통계 쿼리 결과를 직접 호출하여 표시할 수 있도록 저장됩니다.
저장된 쿼리 통계의 경우 다음 호출 시 유연한 필터링 방법에 따라 쿼리 결과를 필터링할 수 있습니다. 인터페이스는 간단하고 직관적이어야 하며 컴퓨터에 능숙하지 않은 운영자도 사용하기 쉽습니다.
일부 복잡한 쿼리의 경우 백그라운드에서 직접 Sql을 작성하거나 Sp를 호출하여 데이터를 내보낼 수 있습니다
-
......
실제 환경에서의 구현 및 적용은 다음과 같습니다. 학생 취업 시스템이므로 학생들은 각기 다른 시기에 졸업 목적지를 등록하므로 통계는 각기 다른 기한을 기준으로 합니다. 다르다. 데이터 테이블에는 100개가 넘는 필드가 있습니다(모든 필드에 통계가 필요한 것은 아닙니다).
먼저, 다양한 시간 구분에 따라 데이터를 반환할 수 있는 테이블 반환 함수를 데이터베이스에 구축합니다. 테이블은 뷰 역할도 하며 매개변수 테이블의 값은 반환 결과에 직접 포함됩니다.
ALTER FUNCTION [dbo].[Get.............] ( @gxsj datetime ) RETURNS TABLE AS RETURN ( select t1.*, dbo.depacode.xymc, CASE t1.xldm WHEN '01' THEN '博士' WHEN '11' THEN '硕士' WHEN '25' THEN '双学位' WHEN '31' THEN '本科' WHEN '41' THEN '专科' WHEN '61' THEN '高职' ELSE '' END AS xlmc, CASE WHEN LEFT(t1.sydqdm, 2) IN ('11', '12', '13', '21', '31', '32', '33', '35', '37', '44', '46', '71', '81', '82') THEN '东部' WHEN LEFT(t1.sydqdm, 2) IN ('14', '22', '23', '34', '36', '41', '42', '43') THEN '中部' WHEN LEFT(t1.sydqdm, 2) IN ('15', '45', '51', '50', '52', '53', '54', '61', '62', '65', '63', '64') THEN '西部' ELSE '' END AS sydq, sydq.dwdqmc AS sysf, CASE WHEN LEFT(t1.dwdqdm, 2) IN ('11', '12', '13', '21', '31', '32', '33', '35', '37', '44', '46', '71', '81', '82') THEN '东部' WHEN LEFT(t1.dwdqdm, 2) IN ('14', '22', '23', '34', '36', '41', '42', '43') THEN '中部' WHEN LEFT(t1.dwdqdm, 2) IN ('15', '45', '51', '50', '52', '53', '54', '61', '62', '65', '63', '64') THEN '西部' ELSE '' END AS dwdq, dwdq.dwdqmc AS dwsf, dbo.Entcode.hyname, dbo.hydygx.hymldm, dbo.hydygx.hyml, CASE t1.xbdm WHEN 1 THEN '男' WHEN 2 THEN '女' ELSE '男' END AS xbmc, [mzdmb].[nation] AS mzmc, [EjByqxdmb].[Ejbyqxmc], dbo.byqxdygx.jybbyqx, t1.gn500 AS jybdwxzdm, CASE t1.knslbdm WHEN '7' THEN '就业困难、家庭困难和残疾' WHEN '6' THEN '家庭困难和残疾' WHEN '5' THEN '就业困难和残疾' WHEN '4' THEN '残疾' WHEN '3' THEN '就业和家庭困难' WHEN '2' THEN '家庭困难' WHEN '1' THEN '就业困难' ELSE '非困难生' END AS Knslb from [table] as t1 LEFT OUTER JOIN dbo.depacode ON t1.xydm = dbo.depacode.xydm LEFT OUTER JOIN dbo.dwdq AS sydq ON LEFT(t1.sydqdm, 2) + '0000' = sydq.dwdqdm LEFT OUTER JOIN dbo.dwdq AS dwdq ON LEFT(t1.dwdqdm, 2) + '0000' = dwdq.dwdqdm LEFT OUTER JOIN dbo.Entcode ON t1.hylb = dbo.Entcode.hycode LEFT OUTER JOIN dbo.hydygx ON t1.hylb = dbo.hydygx.hydldm LEFT OUTER JOIN [mzdmb] ON t1.mzdm = [mzdmb].[mzdm] LEFT OUTER JOIN [EjByqxdmb] ON t1.byqx2 = [EjByqxdmb].[Ejbyqxdm] LEFT OUTER JOIN dbo.byqxdygx ON t1.byqx = dbo.byqxdygx.shbyqx AND t1.dwxzdm = dbo.byqxdygx.shdwxzdm where [gxsj] <= dateadd(day,1,@gxsj) and HisId in (SELECT TOP 1 HisId FROM [table] WHERE [gxsj] <= dateadd(day,1,@gxsj) and xsxh = t1.xsxh and bynf = t1.bynf and t1.byqx not in ('08','05','11') ORDER BY [gxsj] DESC) )따라서
를 사용하여 마감일인 8월 25일에 대한 데이터를 쿼리할 수 있습니다.
다음 단계는 인터페이스 디자인입니다. jquery-ui의 dropabledragable 컨트롤을 사용합니다. 필드는 인터페이스에 정렬되어 있으며 해당 필드로 직접 드래그하여 통계를 수행할 수 있습니다.
표시 필드는 그룹화 필드 외에도 특정 값을 기반으로 통계 필터링을 수행하여 다중 그룹화 통계 기능을 제공할 수 있습니다.
select * from [get...]('2016-8-25')
보시다시피 맨 위 열은 데이터 필터링이고, 그 다음에는 시스템에서 저장한 쿼리가 있습니다(테이블 쿼리와 그래픽 쿼리로 구분됩니다). 저장된 쿼리를 클릭하면 바로 가져옵니다. 쿼리 결과를 확인하거나 저장된 쿼리를 삭제할 수 있습니다. 아래는 사용자 정의 쿼리이고, 위는 조건 행과 드래그 앤 드롭이 가능한 필드입니다. 필드를 그룹화 열로 드래그하면 필드 이름이 표시됩니다. 표시된 데이터의 통계를 그룹화하고 필터링할 수도 있습니다. 다음은 소계 및 합계 표시 여부, 차트 표시 방법에 대한 몇 가지 옵션입니다.
통계를 표 형식으로 표시합니다. 팝업 상자에서 각 값을 클릭하면 하단에 쿼리 조건이 저장되어 그래픽으로 표시됩니다.
그래픽 표시. :
다음은 InquireHelper.cs 핵심 클래스입니다.
Field 엔터티 클래스(부분)
[Serializable] [XmlInclude(typeof(BYNF_InquireField))] [XmlInclude(typeof(Count_InquireField))] [XmlInclude(typeof(XYMC_InquireField))] [XmlInclude(typeof(ZYMC_InquireField))] [XmlInclude(typeof(SZBJ_InquireField))] [XmlInclude(typeof(FDY_InquireField))] [XmlInclude(typeof(XL_InquireField))] [XmlInclude(typeof(SYDQ_InquireField))] [XmlInclude(typeof(SYSF_InquireField))] [XmlInclude(typeof(DWDQ_InquireField))] [XmlInclude(typeof(DWSF_InquireField))] [XmlInclude(typeof(HYML_InquireField))] [XmlInclude(typeof(HYDL_InquireField))] [XmlInclude(typeof(XBMC_InquireField))] [XmlInclude(typeof(MZMC_InquireField))] [XmlInclude(typeof(BYQX_InquireField))] [XmlInclude(typeof(KNSLB_InquireField))] [XmlInclude(typeof(ZYDKL_InquireField))] [XmlInclude(typeof(DWXZ_InquireField))] [XmlInclude(typeof(EJBYQXMC_InquireField))] [XmlInclude(typeof(GZ_InquireField))] [XmlInclude(typeof(WYJE_InquireField))] public abstract class InquireFieldBase { public InquireFieldBase() { FieldItems = this.GetInquireItemsByInquireType(); } [XmlAttribute] public int FieldDisplayOrder { get; set; } [XmlAttribute] public string FieldName { get; set; } [XmlAttribute] public string DbName { get; set; } [XmlAttribute] public bool IsAggregate { get; set; } [XmlAttribute] public InquireHelper.FieldType FieldType { get; set; } //用于highchart统计 [XmlAttribute] public bool IsNameField { get; set; } //用于统计输出数据 [XmlAttribute] public bool IsPercent { get; set; } [XmlIgnore] public List<string> FieldItems { get; set; } public List<string> FieldValue { get; set; } public bool? OrderByAsc { get; set; } } [Serializable] public class BYNF_InquireField : InquireFieldBase { public BYNF_InquireField() { FieldDisplayOrder = 1; FieldName = "毕业年份"; DbName = "BYNF"; } } [Serializable] public class XYMC_InquireField : InquireFieldBase { public XYMC_InquireField() { FieldDisplayOrder = 5; FieldName = "学院名称"; DbName = "XYMC"; } } [Serializable] public class ZYMC_InquireField : InquireFieldBase { public ZYMC_InquireField() { FieldDisplayOrder = 6; FieldName = "专业名称"; DbName = "ZYMC"; } } [Serializable] public class SZBJ_InquireField : InquireFieldBase { public SZBJ_InquireField() { FieldDisplayOrder = 7; FieldName = "所在班级"; DbName = "SZBJ"; } } [Serializable] public class FDY_InquireField : InquireFieldBase { public FDY_InquireField() { FieldDisplayOrder = 8; FieldName = "辅导员"; DbName = "FDY"; } } [Serializable] public class XL_InquireField : InquireFieldBase { public XL_InquireField() { FieldDisplayOrder = 9; FieldName = "学历"; DbName = "XLMC"; } } [Serializable] public class SYDQ_InquireField : InquireFieldBase { public SYDQ_InquireField() { FieldDisplayOrder = 10; FieldName = "生源地区"; DbName = "SYDQ"; } } [Serializable] public class SYSF_InquireField : InquireFieldBase { public SYSF_InquireField() { FieldDisplayOrder = 11; FieldName = "生源省份"; DbName = "SYSF"; } } [Serializable] public class DWDQ_InquireField : InquireFieldBase { public DWDQ_InquireField() { FieldDisplayOrder = 12; FieldName = "单位地区"; DbName = "DWDQ"; } } [Serializable] public class DWSF_InquireField : InquireFieldBase { public DWSF_InquireField() { FieldDisplayOrder = 13; FieldName = "单位省份"; DbName = "DWSF"; } }Control 클래스
public static class InquireHelper { public static List<InquireFieldBase> GetSubInquireList() { var inquires = new List<InquireFieldBase>(); var subTypeQuery = from t in Assembly.GetExecutingAssembly().GetTypes() where IsSubClassOf(t, typeof(InquireFieldBase)) select t; foreach (var type in subTypeQuery) { InquireFieldBase obj = CreateObject(type.FullName) as InquireFieldBase; if (obj != null) { inquires.Add(obj); } } return inquires; } static bool IsSubClassOf(Type type, Type baseType) { var b = type.BaseType; while (b != null) { if (b.Equals(baseType)) { return true; } b = b.BaseType; } return false; } /// <summary> /// 创建对象(当前程序集) /// </summary> /// <param name="typeName">类型名</param> /// <returns>创建的对象,失败返回 null</returns> public static object CreateObject(string typeName) { object obj = null; try { Type objType = Type.GetType(typeName, true); obj = Activator.CreateInstance(objType); } catch (Exception ex) { } return obj; } public static List<InquireFieldBase> BindCondition(this List<InquireFieldBase> conditions, string conditionName, List<string> values) { var condition = conditions.FirstOrDefault(c => c.GetType().Name == conditionName && c.FieldType == FieldType.ConditionField); if (condition == null) { condition = CreateObject("BLL." + conditionName) as InquireFieldBase; condition.FieldType = FieldType.ConditionField; conditions.Add(condition); } condition.FieldValue = values; return conditions; } //public static List<InquireFieldBase> BindCondition(this List<InquireFieldBase> conditions, string conditionName, string range1, string range2) //{ // var condition = conditions.FirstOrDefault(c => c.GetType().Name == conditionName && c.FieldType == FieldType.ConditionField); // if (!string.IsNullOrEmpty(range2)&&!string.IsNullOrEmpty(range1)) // { // if (condition == null) // { // condition = CreateObject("BLL." + conditionName) as InquireFieldBase; // condition.FieldType = FieldType.ConditionField; // conditions.Add(condition); // } // condition.FieldValue = string.Concat(condition.DbName, // " between to_date('", range1, "', 'yyyy-mm-dd hh24:mi:ss') and to_date('", range2, // "', 'yyyy-mm-dd hh24:mi:ss')"); // } // return conditions; //} public static DataTable GetDataTable(StatisticsInquire inquire) { var inquireCond = new List<string>(); inquire.InquireFields.Where(f => f.FieldType == InquireHelper.FieldType.GroupField).ToList() .ForEach(f => { if (!f.IsAggregate) { inquireCond.Add(string.Concat(f.DbName, " AS ", f.FieldName)); } }); inquire.InquireFields.Where(f => f.FieldType == FieldType.DisplayField).ToList().ToList() .ForEach(f => { if (f.IsAggregate) { inquireCond.Add(string.Concat(f.DbName, " AS ", f.FieldName)); } else { if (f.IsPercent) { inquireCond.Add(string.Concat("ltrim(Convert(numeric(9,2), SUM(CASE WHEN ", f.DbName, " IN ('", string.Join("', '", f.FieldValue), "') THEN 1 ELSE 0 END)*100.0/Count(*))) + '%' AS '", f.FieldName, ":", string.Join(",", f.FieldValue).SubStr(60), "(%)'")); } else { inquireCond.Add(string.Concat("SUM(CASE WHEN ", f.DbName, " IN ('", string.Join("', '", f.FieldValue) , "') THEN 1 ELSE 0 END) AS '", f.FieldName, ":", string.Join(",", f.FieldValue).SubStr(60), "'")); } } }); var whereCond = new List<string>(); inquire.InquireFields.Where(f => f.FieldType == InquireHelper.FieldType.ConditionField).ToList() .ForEach(f => { whereCond.Add(string.Concat(f.DbName, " IN ('", string.Join("','", f.FieldValue), "')")); }); var groupCond = new List<string>(); inquire.InquireFields.Where(f => f.FieldType == InquireHelper.FieldType.GroupField).ToList() .ForEach(f => { groupCond.Add(f.DbName); }); var orderbyCond = new List<string>(); inquire.InquireFields.Where(f => f.FieldType == InquireHelper.FieldType.OrderByField).ToList() .ForEach(f => { orderbyCond.Add(string.Concat(f.DbName, " ", f.OrderByAsc.GetValueOrDefault() ? "ASC" : "DESC")); }); var sqlStr = string.Concat("SELECT ", string.Join(", ", inquireCond), " FROM GetStudentStatusByGxsj('", inquire.StatisticsDate , "')", whereCond.Any() ? " WHERE " : string.Empty, string.Join(" AND ", whereCond), groupCond.Any() ? " GROUP BY " : string.Empty, (inquire.ShowSubSummary || inquire.ShowSummary) ? string.Concat("rollup(", string.Join(", ", groupCond), ")") : string.Join(", ", groupCond), orderbyCond.Any() ? " ORDER BY " : string.Empty, string.Join(", ", orderbyCond)); var dt = DBUtility.DbHelperSql.Query(sqlStr).Tables[0]; if (!inquire.ShowSubSummary) { if (inquire.ShowSummary) { var col = inquire.InquireFields.Where(f => f.FieldType == InquireHelper.FieldType.GroupField).Count(); for(int i = dt.Rows.Count - 2; i >=0 ; i -- ){ if (dt.Rows[i][col - 1].ToString() == "") { dt.Rows.RemoveAt(i); //dt.Rows.Remove[dt.Rows[i]); } } } } else { var col = inquire.InquireFields.Where(f => f.FieldType == InquireHelper.FieldType.GroupField).Count(); for (int i = 0; i < dt.Rows.Count - 1; i++) { for (int j = 1; j < col; j++) { if (dt.Rows[i][j].ToString() == "") { dt.Rows[i][j] = "小计"; break; } } } } if (inquire.ShowSubSummary || inquire.ShowSummary) { dt.Rows[dt.Rows.Count - 1][0] = "合计"; } return dt; } public static string SubStr(this string str, int maxLength) { if (str.Length > maxLength) { return str.Substring(0, maxLength - 1); } else { return str; } } public static string ToSerializableXML<T>(this T t) { XmlSerializer mySerializer = new XmlSerializer(typeof(T)); StringWriter sw = new StringWriter(); mySerializer.Serialize(sw, t); return sw.ToString(); } public static T ToEntity<T>(this string xmlString) { var xs = new XmlSerializer(typeof(T)); var srReader = new StringReader(xmlString); var steplist = (T)xs.Deserialize(srReader); return steplist; } public enum FieldType { DisplayField, GroupField, ConditionField, OrderByField } private static ConcurrentDictionary<InquireFieldBase, List<string>> _inquireItems = new ConcurrentDictionary<InquireFieldBase,List<string>>(); public static List<string> GetInquireItemsByInquireType(this InquireFieldBase inquireField) { List<string> inquireItems; if (_inquireItems.TryGetValue(inquireField, out inquireItems)) { return inquireItems; } switch (inquireField.GetType().Name) { case "XYMC_InquireField": inquireItems = new BLL.depacode().GetModelList("").OrderBy(d => d.xydm).Select(d => d.xymc).ToList(); break; case "ZYMC_InquireField": inquireItems = new BLL.profcode().GetModelList("").OrderBy(d => d.xydm).ThenBy(d => d.zydm).Select(d => d.zymc).ToList(); break; case "SZBJ_InquireField": inquireItems = DbHelperSql.Query("select distinct szbj from jbdate order by szbj").Tables[0].AsEnumerable().Select(b => b["szbj"].ToString()).ToList(); break; case "FDY_InquireField": inquireItems = new BLL.DepaUser().GetModelList("").OrderBy(d => d.XYDM).ThenBy(y => y.YHXM).Select(d => d.YHXM).ToList(); break; case "XL_InquireField": inquireItems = new[] { "博士", "硕士", "双学位", "本科", "专科", "高职" }.ToList(); break; case "SYDQ_InquireField": inquireItems = new[] { "东部", "中部", "西部" }.ToList(); break; case "SYSF_InquireField": inquireItems = DbHelperSql.Query("select [Name] from [Sydqdm] where RIGHT([code], 4) = '0000' order by code").Tables[0].AsEnumerable().Select(b => b["Name"].ToString()).ToList(); break; case "DWDQ_InquireField": inquireItems = new[] { "东部", "中部", "西部" }.ToList(); break; case "DWSF_InquireField": inquireItems = DbHelperSql.Query("select [Name] from [Sydqdm] where RIGHT([code], 4) = '0000' order by code").Tables[0].AsEnumerable().Select(b => b["Name"].ToString()).ToList(); break; case "HYML_InquireField": inquireItems = DbHelperSql.Query("select distinct hyml from [hydygx]").Tables[0].AsEnumerable().Select(b => b["hyml"].ToString()).ToList(); break; case "HYDL_InquireField": inquireItems = DbHelperSql.Query("select hydl from [hydygx] order by hydldm").Tables[0].AsEnumerable().Select(b => b["hydl"].ToString()).ToList(); break; case "XBMC_InquireField": inquireItems = new[] { "男", "女" }.ToList(); break; case "MZMC_InquireField": inquireItems = DbHelperSql.Query("select nation from [mzdmb] where nation in (select nation from jbdate) order by mzdm").Tables[0].AsEnumerable().Select(b => b["nation"].ToString()).ToList(); break; case "BYQX_InquireField": inquireItems = new BLL.Byqxdmb().GetModelList("").OrderBy(d => d.Byqxdm).Select(d => d.Byqxmc).ToList(); break; case "KNSLB_InquireField": inquireItems = new[] { "就业困难、家庭困难和残疾", "家庭困难和残疾", "就业困难和残疾", "残疾", "就业和家庭困难", "家庭困难", "就业困难", "非困难生" }.ToList(); break; case "ZYDKL_InquireField": inquireItems = new[] { "专业对口", "专业相关", "不对口", "未填写" }.ToList(); break; case "DWXZ_InquireField": inquireItems = new BLL.Dwxz().GetModelList("").OrderBy(d => d.dwxzdm).Select(d => d.dwxzmc).ToList(); break; case "EJBYQXMC_InquireField": inquireItems = new BLL.EjByqxdmb().GetModelList("").OrderBy(d => d.Ejbyqxdm).Select(d => d.Ejbyqxmc).ToList(); break; } if (inquireItems != null) { _inquireItems[inquireField] = inquireItems; return inquireItems; } return new List<string>(); } } [Serializable] public class StatisticsInquire { public List<InquireFieldBase> InquireFields { get; set; } [XmlAttribute] public bool ShowSummary { get; set; } [XmlAttribute] public bool ShowSubSummary { get; set; } [XmlAttribute] public string StatisticsDate { get; set; } [XmlAttribute] public HighChart.ChartType ChartType { get; set; } }
실제 사용중인데, 여전히 매우 편리합니다.
향후 버전에서 제공될 것으로 예상되는 기능:
위 내용은 Asp.net을 사용하여 정보 관리 시스템의 데이터 통계 기능 구현의 상세 내용입니다. 자세한 내용은 PHP 중국어 웹사이트의 기타 관련 기사를 참조하세요!

C# .NET 개발을 시작하려면 다음과 같은 것이 필요합니다. 1. C#의 기본 지식과 .NET 프레임 워크의 핵심 개념을 이해하십시오. 2. 변수, 데이터 유형, 제어 구조, 기능 및 클래스의 기본 개념을 마스터하십시오. 3. LINQ 및 비동기 프로그래밍과 같은 C#의 고급 기능을 배우십시오. 4. 일반적인 오류에 대한 디버깅 기술 및 성능 최적화 방법에 익숙해 지십시오. 이러한 단계를 통해 C#.NET의 세계를 점차적으로 침투하고 효율적인 응용 프로그램을 작성할 수 있습니다.

C#과 .NET의 관계는 분리 할 수 없지만 같은 것은 아닙니다. C#은 프로그래밍 언어이며 .NET은 개발 플랫폼입니다. C#은 코드를 작성하고 .NET의 중간 언어 (IL)로 컴파일하고 .NET 런타임 (CLR)에 의해 실행되는 데 사용됩니다.

C#.NET은 여러 응용 프로그램 개발을 지원하는 강력한 도구 및 라이브러리를 제공하기 때문에 여전히 중요합니다. 1) C#은 .NET 프레임 워크를 결합하여 개발 효율적이고 편리하게 만듭니다. 2) C#의 타입 안전 및 쓰레기 수집 메커니즘은 장점을 향상시킵니다. 3) .NET은 크로스 플랫폼 실행 환경과 풍부한 API를 제공하여 개발 유연성을 향상시킵니다.

C#.NETISVERSATILEFORBOTHWEBBANDDESKTOPDEVENTROMMENT.1) FORWEB, useASP.NETFORRICHINTERFACES.3) FORDESKTOP.3) USEXAMARINFORCROSS-PLATFORMDEEVENTRIMMENT, LINABILEDEV, MACODEDEV, and MACODEDOWS, 및 MACODEDOWS.

C# 및 .NET는 지속적인 업데이트 및 최적화를 통해 신흥 기술의 요구에 적응합니다. 1) C# 9.0 및 .NET5는 레코드 유형 및 성능 최적화를 소개합니다. 2) .NETCORE는 클라우드 네이티브 및 컨테이너화 된 지원을 향상시킵니다. 3) ASP.NETCORE는 최신 웹 기술과 통합됩니다. 4) ML.NET는 기계 학습 및 인공 지능을 지원합니다. 5) 비동기 프로그래밍 및 모범 사례는 성능을 향상시킵니다.

C#.netissuitable forenterprise-levelapplications는 richlibraries, androbustperformance, 그러나 itmaynotbeidealforcross-platformdevelopmentorwhenrawspeediscritical, wherelanguagesslikerustorthightordogrordogrognegrognegrognegrognecross-platformdevelopmentor.

.NET에서 C#의 프로그래밍 프로세스에는 다음 단계가 포함됩니다. 1) C# 코드 작성, 2) 중간 언어 (IL)로 컴파일하고 .NET 런타임 (CLR)에 의해 실행됩니다. .NET에서 C#의 장점은 현대적인 구문, 강력한 유형 시스템 및 .NET 프레임 워크와의 긴밀한 통합으로 데스크탑 응용 프로그램에서 웹 서비스에 이르기까지 다양한 개발 시나리오에 적합합니다.

C#은 Microsoft가 개발 한 최신 객체 지향 프로그래밍 언어이며 .NET 프레임 워크의 일부로 개발되었습니다. 1.C#은 캡슐화, 상속 및 다형성을 포함한 객체 지향 프로그래밍 (OOP)을 지원합니다. 2. C#의 비동기 프로그래밍은 응용 프로그램 응답 성을 향상시키기 위해 비동기 및 키워드를 기다리는 키워드를 통해 구현됩니다. 3. LINQ를 사용하여 데이터 컬렉션을 간결하게 처리하십시오. 4. 일반적인 오류에는 NULL 참조 예외 및 인덱스 외 예외가 포함됩니다. 디버깅 기술에는 디버거 사용 및 예외 처리가 포함됩니다. 5. 성능 최적화에는 StringBuilder 사용 및 불필요한 포장 및 Unboxing을 피하는 것이 포함됩니다.


핫 AI 도구

Undresser.AI Undress
사실적인 누드 사진을 만들기 위한 AI 기반 앱

AI Clothes Remover
사진에서 옷을 제거하는 온라인 AI 도구입니다.

Undress AI Tool
무료로 이미지를 벗다

Clothoff.io
AI 옷 제거제

AI Hentai Generator
AI Hentai를 무료로 생성하십시오.

인기 기사

뜨거운 도구

메모장++7.3.1
사용하기 쉬운 무료 코드 편집기

ZendStudio 13.5.1 맥
강력한 PHP 통합 개발 환경

VSCode Windows 64비트 다운로드
Microsoft에서 출시한 강력한 무료 IDE 편집기

맨티스BT
Mantis는 제품 결함 추적을 돕기 위해 설계된 배포하기 쉬운 웹 기반 결함 추적 도구입니다. PHP, MySQL 및 웹 서버가 필요합니다. 데모 및 호스팅 서비스를 확인해 보세요.

SecList
SecLists는 최고의 보안 테스터의 동반자입니다. 보안 평가 시 자주 사용되는 다양한 유형의 목록을 한 곳에 모아 놓은 것입니다. SecLists는 보안 테스터에게 필요할 수 있는 모든 목록을 편리하게 제공하여 보안 테스트를 더욱 효율적이고 생산적으로 만드는 데 도움이 됩니다. 목록 유형에는 사용자 이름, 비밀번호, URL, 퍼징 페이로드, 민감한 데이터 패턴, 웹 셸 등이 포함됩니다. 테스터는 이 저장소를 새로운 테스트 시스템으로 간단히 가져올 수 있으며 필요한 모든 유형의 목록에 액세스할 수 있습니다.
