PHP array 中追加实体类的实体

function getqos_one($ethnumber)	{		$qos = new qosclass();		$file="/usr/local/lte/em100cfg".$ethnumber;		echo $file;		$content=file_get_contents($file);		$list=explode("\n",$content);		$qosarry=array();		for($i=1;$i<5;$i++)		{		foreach($list as $line)		{			$line=trim($line);			$eq=strpos($line,'=');			if($eq>0)//该行存在‘=’号				$val=substr($line,$eq+1);						if(strpos($line,"qos".$i."_en")===0)			{				$qos->qos=$val;//连接状态			}			else if(strpos($line,"qos".$i."_cid")===0)			{				$qos->qos_cid=$val;			}			else if(strpos($line,"qos".$i."_packet_filter_identifier")===0)			{				$qos->qos_packet_filter_identifier=$val;			}			else if(strpos($line,"qos".$i."_evaluation_precedence_index")===0)			{				$qos->qos_evaluation_precedence_index=$val;			}			else if(strpos($line,"qos".$i."_source_address")===0)			{				$qos->qos_source_address=$val;			}			else if(strpos($line,"qos".$i."_subnet_mask")===0)			{				$qos->qos_subnet_mask=$val;			}			else if(strpos($line,"qos".$i."_protocol_number")===0)			{				$qos->qos_protocol_number=$val;			}			else if(strpos($line,"qos".$i."_destination_port_range")===0)			{				$qos->qos_destination_port_range=$val;			}			else if(strpos($line,"qos".$i."_source_port_range")===0)			{				$qos->qos_source_port_range=$val;			}			else if(strpos($line,"qos".$i."_direction")===0)			{				$qos->qos_direction=$val;			}			else if(strpos($line,"qos".$i."_QCI")===0)			{				$qos->qos_QCI=$val;			}			else if(strpos($line,"qos".$i."_DL_GBR")===0)			{				$qos->qos_DL_GBR=$val;			}			else if(strpos($line,"qos".$i."_UL_GBR")===0)			{				$qos->qos_UL_GBR=$val;			}			else if(strpos($line,"qos".$i."_DL_MBR")===0)			{				$qos->qos_DL_MBR=$val;			}			else if(strpos($line,"qos".$i."_UL_MBR")===0)			{				$qos->qos_UL_MBR=$val;			}					}		//print_r($qos);//这里打印每一个qos都是正常的		array_unshift($qosarry,$qos);		//print_r($qosarry);//这里打印qosarry里面的值 就全是空的了 注:$i=3或者4时 qos的值都是空		}		print_r($qosarry);		return $qosarry;class qosclass	{		public $qos;//使能		public $qos_cid;		public $qos_packet_filter_identifier;		public $qos_evaluation_precedence_index;		public $qos_source_address;		public $qos_subnet_mask;		public $qos_protocol_number;		public $qos_destination_port_range;		public $qos_source_port_range;		public $qos_direction;		public $qos_QCI;		public $qos_DL_GBR;		public $qos_UL_GBR;		public $qos1_DL_MBR;		public $qos_UL_MBR;	}

为何在unshift之后 值就没了呢?还是第四个的值取代了前面几个的值?

回复讨论(解决方案)

急急急急急!!!!!!!!!!!!!!!!!!!!!!!大神们 帮帮忙啊 !!!!!!!!!!!!!!!!!!!!!!!!!!!!

class前面少了个"  }  " 

看一下 $file="/usr/local/lte/em100cfg".$ethnumber; 的内容

按理说 $qosarry 的 4 个元素的值都是一样的才对（因为对象总是以引用传递的）

看一下 $file="/usr/local/lte/em100cfg".$ethnumber; 的内容

按理说 $qosarry 的 4 个元素的值都是一样的才对（因为对象总是以引用传递的）

文件里面的内容我贴上来吧
qos1_en=yes

qos1_cid=2

qos1_packet_filter_identifier=1

qos1_evaluation_precedence_index=1

qos1_source_address=192.168.1.1

qos1_subnet_mask=255.255.255.255

qos1_protocol_number=

qos1_destination_port_range=

qos1_source_port_range=

qos1_direction=3

qos1_QCI=4

qos1_DL_GBR=1024

qos1_UL_GBR=1024

qos1_DL_MBR=2048

qos1_UL_MBR=2048

qos1_cfg_result=



qos2_en=使能

qos2_cid=id

qos2_packet_filter_identifier=tft标号

qos2_evaluation_precedence_index=tft优先级

qos2_source_address=原地值

qos2_subnet_mask=

qos2_protocol_number=协议号

qos2_destination_port_range=目的端口范围

qos2_source_port_range=远端口范围

qos2_direction=方向

qos2_QCI=qci

qos2_DL_GBR=下行GBR

qos2_UL_GBR=上行

qos2_DL_MBR=

qos2_UL_MBR=

qos2_cfg_result=1&0 1=成功



qos3_en=

qos3_cid=

qos3_packet_filter_identifier=

qos3_evaluation_precedence_index=

qos3_source_address=

qos3_subnet_mask=

qos3_protocol_number=

qos3_destination_port_range=

qos3_source_port_range=

qos3_direction=

qos3_QCI=

qos3_DL_GBR=

qos3_UL_GBR=

qos3_DL_MBR=

qos3_UL_MBR=

qos3_cfg_result=



qos4_en=

qos4_cid=

qos4_packet_filter_identifier=

qos4_evaluation_precedence_index=

qos4_source_address=

qos4_subnet_mask=

qos4_protocol_number=

qos4_destination_port_range=

qos4_source_port_range=

qos4_direction=

qos4_QCI=

qos4_DL_GBR=

qos4_UL_GBR=

qos4_DL_MBR=

qos4_UL_MBR=

qos4_cfg_result=

我试过只循环到2   就是有值的两个  这时候qosarry是正常的 但是只要把 3 加进去就错了 

这不就对了吗？
数据中 gos3_xxxx、gos4_xxxx 都是空的
所以 $qosarry 中也就空了

把 array_unshift($qosarry,$qos);
改成 array_unshift($qosarry, clone $qos);
就正确了

这不就对了吗？
数据中 gos3_xxxx、gos4_xxxx 都是空的
所以 $qosarry 中也就空了

把 array_unshift($qosarry,$qos);
改成 array_unshift($qosarry, clone $qos);
就正确了

对了 谢谢大神 菜鸟不会啊 刚学 谢谢了 大神 

其实你把函数写成这样比较好

function getqos_one($ethnumber){	$file="/usr/local/lte/em100cfg".$ethnumber;	$list = file($file, FILE_SKIP_EMPTY_LINES | FILE_IGNORE_NEW_LINES);	$qosarry=array();	foreach($list as $r) {		list($key, $value) = explode('=', $r);		preg_match('/(\D+)(\d+)(.+)/', $key, $m);		$key = $m[1] . ($m[3] != '_en' ? $m[3] : '');		$i = $m[2];		if(! isset($gosarray[$i])) $gosarray[$i] = new qosclass();		$gosarray[$i]->$key = $value;	}	return $gosarray;}