十、安装clusterware 开始安装，我是使用xmanager 4安装的，我的本机ip为192.168.1.103 [root@rac1 ~]# xhost -bash: xhost: command not found[root@rac1 ~]# export DISPLAY=192.168.1.103:0.0 [root@rac1 ~]# su - oracle[oracle@rac1 ~]$ cd /stage/clus
十、安装clusterware
开始安装，我是使用xmanager 4安装的，我的本机ip为192.168.1.103
[root@rac1 ~]# xhost+ -bash: xhost+: command not found [root@rac1 ~]# export DISPLAY=192.168.1.103:0.0 [root@rac1 ~]# su - oracle [oracle@rac1 ~]$ cd /stage/clustware/Disk1/clusterware/ [oracle@rac1 clusterware]$ ll total 36 drwxr-xr-x 2 oracle oinstall 4096 Jul 3 2005 cluvfy drwxr-xr-x 6 oracle oinstall 4096 Jul 3 2005 doc drwxr-xr-x 4 oracle oinstall 4096 Jul 3 2005 install drwxr-xr-x 2 oracle oinstall 4096 Jul 3 2005 response drwxr-xr-x 2 oracle oinstall 4096 Jul 3 2005 rpm -rwxr-xr-x 1 oracle oinstall 1328 Jul 3 2005 runInstaller drwxr-xr-x 9 oracle oinstall 4096 Jul 3 2005 stage drwxr-xr-x 2 oracle oinstall 4096 Jul 3 2005 upgrade -rw-r--r-- 1 oracle oinstall 3445 Jul 3 2005 welcome.html [oracle@rac1 clusterware]$ ./runInstaller Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2 Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2014-03-22_03-39-48PM. Please wait ...[oracle@rac1 clusterware]$ Oracle Universal Installer, Version 10.2.0.1.0 Production Copyright (C) 1999, 2005, Oracle. All rights reserved.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
如果出现以下错误，则是因为缺少-ivh libXp-1.0.0-8.1.el5.i386.rpm的原因，之前我在检查缺少包时，已经安装过了。
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Exception java.lang.UnsatisfiedLinkError: /tmp/OraInstall2014-03-22_08-31-31AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory occurred.. java.lang.UnsatisfiedLinkError: /tmp/OraInstall2014-03-22_08-31-31AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary0(Unknown Source) at java.lang.ClassLoader.loadLibrary(Unknown Source) at java.lang.Runtime.loadLibrary0(Unknown Source) at java.lang.System.loadLibrary(Unknown Source) at sun.security.action.LoadLibraryAction.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at sun.awt.NativeLibLoader.loadLibraries(Unknown Source) at sun.awt.DebugHelper.
缺少包 [oracle@rac1 clusterware]$ su - Password: [root@rac1 ~]# mount /dev/cdrom /mnt/ mount: you must specify the filesystem type [root@rac1 ~]# mount /dev/cdrom /mnt/ mount: block device /dev/cdrom is write-protected, mounting read-only [root@rac1 ~]# cd /mnt/Server/ [root@rac1 Server]# rpm -ivh libXp-1.0.0-8.1.el5.i386.rpm warning: libXp-1.0.0-8.1.el5.i386.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159 Preparing... ########################################### [100%] 1:libXp ########################################### [100%] ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1.稍微等几秒钟，便可看见弹出的clusterware安装界面，点击“Next” 安装oracle clusterware 10.2.0.1.0开始，进入欢迎界面点击“Next”
2.将Z喎?http://www.2cto.com/kf/ware/vc/" target="_blank" class="keylink">vcmFJbnZlbnRvcnnEv8K8sLLXsLW9L3UwMS9hcHAvb3JhY2xlL29yYUludmVudG9yec/Co6y147v3obBOZXh0obEK1ri2qLLZ1/fPtc2z1+mjum9pbnN0YWxs1+kKxKzIzwo8YnI+Cgo8aW1nIHNyYz0="http://www.2cto.com/uploadfile/Collfiles/20140324/2014032409113091.jpg" alt="\">
3.定义clusterware的安装路径，点击“Next” Name：OraCrs10g_home Path:/u01/app/oracle/product/10.2.0/crs_1
4.先决条件prerequisite检查，0 requirements to beverified。 安装前期的环境检查,如图所示
5. 指定集群节点rac1 rac2 Specify Cluster Configuration 这个地方系统默认只显示一个节点，另一个节点需要手动添加 点击“Add…”-> Public Node Name:rac2.localdomain -> Private Node Name:rac2-priv.localdomain -> virtual Host Name: rac2-vip.localdomain
6. 指定网卡接口用途，系统把所有网卡都扫描进来 点击“Edit”修改 eth0设置为public网卡 eth1设置为private网卡
7.指定“OCR 集群注册表”所对应裸设备路径，点击“Next” OCR：oracle cluster register集群注册表文件，这个文件中记录了oracle RAC的所有可用资源,例如:实例, 数据库 ,监听 ,节点 ,ASM 磁盘组, service服务等资源，只有把新资源注册到OCR才能被RAC调配使用。例如 新加入一个节点到RAC架构，就需要把新节点注册到OCR，由于OCR文件非常重要因此需要我们拥有冗余方案。 选择“External Redundancy 外部冗余”【你将用磁盘管理系统提供OCR冗余】 Specify OCR Location:/dev/raw/raw1
8.指定“Voting Disk 表决磁盘”所对应裸设备路径，点击“Next” Voting Disk：表决磁盘是用于防止脑裂现象的一种判断机制，一般为单数个磁盘，当某个节点发生通信故障或不能继续扮演RAC角色时需要表决磁盘来判断是否剔除它。 选择“External Redundancy 外部冗余” Specify Voting Disk Location:/dev/raw/raw2
9.当上述属性设置完之后，下面开始正式的安装过程，点击“Install”，主节点安装完成后，系统会自动往rac2对应目录下推送clusterware的所有文件。
---------------------------------------------------------------------------------------------------------------------------------------- 如果出现以下错误，则是缺少包的原因，安装包后，在retry，就可以了。
[root@rac1 Server]# rpm -ivh kernel-headers-2.6.18-274.el5.i386.rpm warning: kernel-headers-2.6.18-274.el5.i386.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159 Preparing... ########################################### [100%] 1:kernel-headers ########################################### [100%] [root@rac1 Server]# rpm -ivh glibc-headers-2.5-65.i386.rpm warning: glibc-headers-2.5-65.i386.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159 Preparing... ########################################### [100%] 1:glibc-headers ########################################### [100%] [root@rac1 Server]# rpm -ivh glibc-devel-2.5-65.i386.rpm warning: glibc-devel-2.5-65.i386.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159 Preparing... ########################################### [100%] 1:glibc-devel ########################################### [100%] [root@rac1 Server]# rpm -ivh gcc-4.1.2-51.el5.i386.rpm warning: gcc-4.1.2-51.el5.i386.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159 Preparing... ########################################### [100%] 1:gcc ########################################### [100%] [root@rac1 Server]# rpm -ivh libstdc++-devel-4.1.2-51.el5.i386.rpm warning: libstdc++-devel-4.1.2-51.el5.i386.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159 Preparing... ########################################### [100%] 1:libstdc++-devel ########################################### [100%] [root@rac1 Server]# rpm -ivh gcc-c++-4.1.2-51.el5.i386.rpm warning: gcc-c++-4.1.2-51.el5.i386.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159 Preparing... ########################################### [100%] 1:gcc-c++ ########################################### [100%] [root@rac1 Server]#
---------------------------------------------------------------------------------------------------------------------------
10.安装完成之后，需要分别在两个节点以root身份运行两个脚本 第一个脚本在所有节点上都执行 /u01/app/oracle/oraInventory/orainstRoot.sh 第二个脚本在所有节点上都执行 /u01/app/oracle/product/10.2.0/crs_1/root.sh
按顺序执行 su - root 先在rac1节点上执行：
root@rac1 ~]# /u01/app/oracle/oraInventory/orainstRoot.sh Changing permissions of /u01/app/oracle/oraInventory to 770. Changing groupname of /u01/app/oracle/oraInventory to oinstall. The execution of the script is complete [root@rac1 ~]# /u01/app/oracle/product/10.2.0/crs_1/root.sh WARNING: directory "/u01/app/oracle/product/10.2.0' is not owned by root WARNING: directory '/u01/app/oracle/product' is not owned by root WARNING: directory '/u01/app/oracle' is not owned by root Checking to see if Oracle CRS stack is already configured /etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory Setting up NS directories Oracle Cluster Registry configuration upgraded successfully WARNING: directory '/u01/app/oracle/product/10.2.0' is not owned by root WARNING: directory '/u01/app/oracle/product' is not owned by root WARNING: directory '/u01/app/oracle' is not owned by root assigning default hostname rac1 for node 1. assigning default hostname rac2 for node 2. Successfully accumulated necessary OCR keys. Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897. node
再在rac2节点上执行
[root@rac2 ~]# /u01/app/oracle/oraInventory/orainstRoot.sh Changing permissions of /u01/app/oracle/oraInventory to 770. Changing groupname of /u01/app/oracle/oraInventory to oinstall. The execution of the script is complete
------------------------------------------------------------------------------------------------------
在rac2执行/u01/app/oracle/product/10.2.0/crs_1/root.sh之前要修改两个文件，否则会出现以下错误： /u01/app/oracle/product/10.2.0/crs_1/jdk/jre//bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
----------------------------------------------------------------------------------------------------------------
11.下面我们在rac2上执行root.sh脚本之前需要先在两个节点中都编辑两个文件，使用root用户修改 其实这里需要在两个节点上都需要这两个文件的修改。
第一个文件 [root@rac2 ~]# vi /u01/app/oracle/product/10.2.0/crs_1/bin/vipca 搜索/LD_ASSUME_KERNEL
#Remove this workaround when the bug 3937317 is fixed arch=`uname -m` if [ "$arch" = "i686" -o "$arch" = "ia64" ] then LD_ASSUME_KERNEL=2.4.19 export LD_ASSUME_KERNEL fi unset LD_ASSUME_KERNEL ---添加一行：清除环境变量 #End workaround
------------------------------------------------------------------------------------------------------- 第二个文件 [root@rac2 ~]# vi /u01/app/oracle/product/10.2.0/crs_1/bin/srvctl
#Remove this workaround when the bug 3937317 is fixed LD_ASSUME_KERNEL=2.4.19 export LD_ASSUME_KERNEL unset LD_ASSUME_KERNEL---添加一行：清除环境变量 # Run ops control utility
--------------------------------------------------------------------------------------
12.然后在rac2节点下用root身份执行
[root@rac2 ~]# /u01/app/oracle/product/10.2.0/crs_1/root.sh WARNING: directory '/u01/app/oracle/product/10.2.0' is not owned by root WARNING: directory '/u01/app/oracle/product' is not owned by root WARNING: directory '/u01/app/oracle' is not owned by root Checking to see if Oracle CRS stack is already configured /etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory Setting up NS directories Oracle Cluster Registry configuration upgraded successfully WARNING: directory '/u01/app/oracle/product/10.2.0' is not owned by root WARNING: directory '/u01/app/oracle/product' is not owned by root WARNING: directory '/u01/app/oracle' is not owned by root clscfg: EXISTING configuration version 3 detected. clscfg: version 3 is 10G Release 2. assigning default hostname rac1 for node 1. assigning default hostname rac2 for node 2. Successfully accumulated necessary OCR keys. Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897. node
NO KEYS WERE WRITTEN. Supply -force parameter to override. -force is destructive and will destroy any previous cluster configuration. Oracle Cluster Registry for cluster has already been initialized Startup will be queued to init within 90 seconds. Adding daemons to inittab Expecting the CRS daemons to be up within 600 seconds. CSS is active on these nodes. rac1 rac2 CSS is active on all nodes. Waiting for the Oracle CRSD and EVMD to start Waiting for the Oracle CRSD and EVMD to start Waiting for the Oracle CRSD and EVMD to start Waiting for the Oracle CRSD and EVMD to start Oracle CRS stack installed and running under init(1M) Running vipca(silent) for configuring nodeapps Error 0(Native: listNetInterfaces:[3]) [Error 0(Native: listNetInterfaces:[3])] [root@rac2 ~]#
-------------------------------------------------------------------- 这里报错，有的文档这样修改，我没有验证过。 我是在rac1节点上修改 /u01/app/oracle/product/10.2.0/crs_1/bin/vipca和 /u01/app/oracle/product/10.2.0/crs_1/bin/srvctl后，再次在rac2节点上运行 /u01/app/oracle/product/10.2.0/crs_1/root.sh，如下：
1.这里我没有验证过。有的文档说明可以这样修改。
Waiting for the Oracle CRSD and EVMD to start Oracle CRS stack installed and running under init(1M) Running vipca(silent) for configuring nodeapps 运行vipca配置节点 Error 0(Native: listNetInterfaces:[3]) 本地网卡错误 [Error 0(Native: listNetInterfaces:[3])] 本地网卡错误
cd /u01/app/oracle/product/10.2.0/crs_1/bin ./oifcfg 这是oracle网卡配置工具，我们可以使用这个工具来检查网卡配置是否正确 oifcfg iflist 检查网卡配置 oifcfg setif -global eth0/192.168.1.0:public 指定全局公有网卡 oifcfg setif -global eth1/172.168.1.0:cluster_interconnect 指定全局私有网卡 oifcfg getif 获取配置结果，当rac2配置好后rac1自动生成vipca文件，oifcfg getif
-----------------------------------------------------------------------------------------
2.我是在第一个节点rac1修改后，再在rac2上执行一下/u01/app/oracle/product/10.2.0/crs_1/root.sh脚本：
-- ------------------------------------------------------------------------------------------- rac1节点
第一个文件[root@rac1 ~]# vi /u01/app/oracle/product/10.2.0/crs_1/bin/vipca 搜索/LD_ASSUME_KERNEL
#Remove this workaround when the bug 3937317 is fixed arch=`uname -m` if [ "$arch" = "i686" -o "$arch" = "ia64" ] then LD_ASSUME_KERNEL=2.4.19 export LD_ASSUME_KERNEL fi unset LD_ASSUME_KERNEL ---添加一行：清除环境变量 #End workaround
第二个文件[root@rac1 ~]# vi /u01/app/oracle/product/10.2.0/crs_1/bin/srvctl
#Remove this workaround when the bug 3937317 is fixed LD_ASSUME_KERNEL=2.4.19 export LD_ASSUME_KERNEL unset LD_ASSUME_KERNEL---添加一行：清除环境变量 # Run ops control utility
--------------------------------------------------------------------------------
3.rac2节点再次执行，没有出现错误：
[root@rac2 ~]# /u01/app/oracle/product/10.2.0/crs_1/root.sh WARNING: directory '/u01/app/oracle/product/10.2.0' is not owned by root WARNING: directory '/u01/app/oracle/product' is not owned by root WARNING: directory '/u01/app/oracle' is not owned by root Checking to see if Oracle CRS stack is already configured Oracle CRS stack is already configured and will be running under init(1M) [root@rac2 ~]#
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 13.两个节点执行完毕后，点击OK，出现如下配置信息。
14.在执行oracle cluster verification utility出现错误，此时需要在任意节点上执行配置虚拟ip。
15.使用root用户配置虚拟ip 此步骤在rac1和rac2节点上都可操作 执行/u01/app/oracle/product/10.2.0/crs_1/bin/vipca 自动弹出图形化界面我们可以使用vipca来创建和配置VIP GSD ONS 资源
16.打开欢迎界面，点击“Next”
17. 系统自动找到public的eth0，点击“Next”，【虚拟ip是基于公有网卡eth0】
18 . 补填各节点对应的vip名称和ip地址 mask地址，点击“Next” Node name IP Alias Name IP address Subnet Mask rac1 rac1-vip.localdomain 192.168.1.152 255.255.255.0 rac2 rac2-vip.localdomain 192.168.1.154 255.255.255.0
19 .检查概述信息，点击“Finish”开始安装，重点检查返填出来的IP地址是否正确千万不能错.
20.安装完之后就可以点击“ok”查看结果，点击“Exit”退出vipca.
21.检查vip服务 gsd ons vip 包含三个进程.
crs_stat -t 全是ONLINE才算正常，在所有节点上都相同
target是希望的最终状态，state是当前状态
[root@rac1 bin]# crs_stat -t Name Type Target State Host ------------------------------------------------------------ ora.rac1.gsd application ONLINE ONLINE rac1 ora.rac1.ons application ONLINE ONLINE rac1 ora.rac1.vip application ONLINE ONLINE rac1 ora.rac2.gsd application ONLINE ONLINE rac2 ora.rac2.ons application ONLINE ONLINE rac2 ora.rac2.vip application ONLINE ONLINE rac2
22 .vipca执行成功后，那么相当于rac2的root.sh脚本也顺利完成，下一步需要做的就是返回到rac1节点，执行剩下的步骤，点击“OK”在Retry，
23 .启动三个组件并通过前提条件检查.如下，状态为全部成功》 Oracle Notification Server Configuration Assistance 通知服务 Oracle Private Interconnect Configuration Assistance 私有互联服务 Oracle Cluster Verification Utility 集群检查工具
24 .等待配置完成后，将会收到“The installation of Oracle Clusterware was successful”提示信息，点击“Exit”，“Yes”退出整个clusterware的安装界面
25.验证安装成功.至此，clusterware安装成功。
在rac1和rac2上分别执行crs_stat -t 检查集群软件状态，必须都为ONLINE才算正常 [root@rac1 bin]# crs_stat -t Name Type Target State Host ------------------------------------------------------------ ora.rac1.gsd application ONLINE ONLINE rac1 ora.rac1.ons application ONLINE ONLINE rac1 ora.rac1.vip application ONLINE ONLINE rac1 ora.rac2.gsd application ONLINE ONLINE rac2 ora.rac2.ons application ONLINE ONLINE rac2 ora.rac2.vip application ONLINE ONLINE rac2 ---------------------------------------------------------------------- [root@rac2 bin]# crs_stat -t Name Type Target State Host ------------------------------------------------------------ ora.rac1.gsd application ONLINE ONLINE rac1 ora.rac1.ons application ONLINE ONLINE rac1 ora.rac1.vip application ONLINE ONLINE rac1 ora.rac2.gsd application ONLINE ONLINE rac2 ora.rac2.ons application ONLINE ONLINE rac2 ora.rac2.vip application ONLINE ONLINE rac2
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
성명
본 글의 내용은 네티즌들의 자발적인 기여로 작성되었으며, 저작권은 원저작자에게 있습니다. 본 사이트는 이에 상응하는 법적 책임을 지지 않습니다. 표절이나 침해가 의심되는 콘텐츠를 발견한 경우 admin@php.cn으로 문의하세요.
MySQL : Blob 및 기타없는 SQL 스토리지, 차이점은 무엇입니까?May 13, 2025 am 12:14 AMmysql'sblobissuilableforstoringbinarydatawithinareldatabase, whilenosqloptionslikemongodb, redis, and cassandraofferflexible, scalablesolutionsforunstuctureddata.blobissimplerbutcanslowwownperformance를 사용하는 것들보업 betterscal randaysand
MySQL 추가 사용자 : 구문, 옵션 및 보안 모범 사례May 13, 2025 am 12:12 AMTOADDAUSERINMYSQL, 사용 : CreateUser'UserName '@'host'IdentifiedBy'Password '; 여기서'showTodoitseciRely : 1) ChoosetheHostCareLyTocon trolaccess.2) setResourcelimitswithOptionslikemax_queries_per_hour.3) Usestrong, iriquepasswords.4) enforcessl/tlsconnectionswith
MySQL : 문자열 데이터 유형을 피하는 방법 일반적인 실수?May 13, 2025 am 12:09 AMtoavoidcommonmistakeswithstringdatatypesinmysql, stroundStringTypenuances, chooseTherightType, andManageEncodingAndCollationSettingSefectively.1) usecharforfixed-lengthstrings, varcharvariable-length, andtext/blobforlargerdata.2) setcarcatter
MySQL : 문자열 데이터 유형 및 열거?May 13, 2025 am 12:05 AMmysqloffersechar, varchar, text, anddenumforstringdata.usecharforfixed-lengthstrings, varcharerforvariable 길이, 텍스트 forlarger 텍스트, andenumforenforcingdataantegritystofvalues.
MySQL Blob : Blobs 요청을 최적화하는 방법May 13, 2025 am 12:03 AMmysqlblob 요청 최적화는 다음 전략을 통해 수행 할 수 있습니다. 1. Blob 쿼리의 빈도를 줄이거나 독립적 인 요청을 사용하거나 지연로드를 사용하십시오. 2. 적절한 Blob 유형 (예 : TinyBlob)을 선택하십시오. 3. Blob 데이터를 별도의 테이블로 분리하십시오. 4. 응용 프로그램 계층에서 블로브 데이터를 압축합니다. 5. Blob Metadata를 색인하십시오. 이러한 방법은 실제 애플리케이션에서 모니터링, 캐싱 및 데이터 샤딩을 결합하여 성능을 효과적으로 향상시킬 수 있습니다.
MySQL에 사용자 추가 : 완전한 튜토리얼May 12, 2025 am 12:14 AMMySQL 사용자를 추가하는 방법을 마스터하는 것은 데이터베이스 관리자 및 개발자가 데이터베이스의 보안 및 액세스 제어를 보장하기 때문에 데이터베이스 관리자 및 개발자에게 중요합니다. 1) CreateUser 명령을 사용하여 새 사용자를 만듭니다. 2) 보조금 명령을 통해 권한 할당, 3) FlushPrivileges를 사용하여 권한이 적용되도록하십시오.
MySQL 문자열 데이터 유형 마스터 링 : Varchar vs. Text vs. CharMay 12, 2025 am 12:12 AMChooseCharfixed-lengthdata, varcharforvariable-lengthdata, andtextforlargetextfields.1) charisefficientsconsentent-lengthdatalikecodes.2) varcharsuitsvariable-lengthdatalikeNames, 밸런싱 플렉스 및 성능
MySQL : 문자열 데이터 유형 및 인덱싱 : 모범 사례May 12, 2025 am 12:11 AMMySQL에서 문자열 데이터 유형 및 인덱스를 처리하기위한 모범 사례는 다음과 같습니다. 1) 고정 길이의 Char, 가변 길이의 Varchar 및 큰 텍스트의 텍스트와 같은 적절한 문자열 유형 선택; 2) 인덱싱에 신중하고, 과도한 인덱싱을 피하고, 공통 쿼리에 대한 인덱스를 만듭니다. 3) 접두사 인덱스 및 전체 텍스트 인덱스를 사용하여 긴 문자열 검색을 최적화합니다. 4) 인덱스를 작고 효율적으로 유지하기 위해 인덱스를 정기적으로 모니터링하고 최적화합니다. 이러한 방법을 통해 읽기 및 쓰기 성능의 균형을 맞추고 데이터베이스 효율성을 향상시킬 수 있습니다.
핫 AI 도구
Undresser.AI Undress
사실적인 누드 사진을 만들기 위한 AI 기반 앱
AI Clothes Remover
사진에서 옷을 제거하는 온라인 AI 도구입니다.
Undress AI Tool
무료로 이미지를 벗다
Clothoff.io
AI 옷 제거제
Video Face Swap
완전히 무료인 AI 얼굴 교환 도구를 사용하여 모든 비디오의 얼굴을 쉽게 바꾸세요!
인기 기사
<garden> : 정원 재배 - 완전한 돌연변이 가이드
3 몇 주 전ByDDD
<gum> : Bubble Gum Simulator Infinity- 로얄 키를 얻고 사용하는 방법
3 몇 주 전By尊渡假赌尊渡假赌尊渡假赌
KB5055612 수정 방법 Windows 10에 설치되지 않습니까?
3 몇 주 전ByDDD
Nordhold : Fusion System, 설명
3 몇 주 전By尊渡假赌尊渡假赌尊渡假赌
Mandragora : 마녀 트리의 속삭임 - Grappling Hook 잠금 해제 방법
3 몇 주 전By尊渡假赌尊渡假赌尊渡假赌
뜨거운 도구
SecList
SecLists는 최고의 보안 테스터의 동반자입니다. 보안 평가 시 자주 사용되는 다양한 유형의 목록을 한 곳에 모아 놓은 것입니다. SecLists는 보안 테스터에게 필요할 수 있는 모든 목록을 편리하게 제공하여 보안 테스트를 더욱 효율적이고 생산적으로 만드는 데 도움이 됩니다. 목록 유형에는 사용자 이름, 비밀번호, URL, 퍼징 페이로드, 민감한 데이터 패턴, 웹 셸 등이 포함됩니다. 테스터는 이 저장소를 새로운 테스트 시스템으로 간단히 가져올 수 있으며 필요한 모든 유형의 목록에 액세스할 수 있습니다.
SublimeText3 영어 버전
권장 사항: Win 버전, 코드 프롬프트 지원!
안전한 시험 브라우저
안전한 시험 브라우저는 온라인 시험을 안전하게 치르기 위한 보안 브라우저 환경입니다. 이 소프트웨어는 모든 컴퓨터를 안전한 워크스테이션으로 바꿔줍니다. 이는 모든 유틸리티에 대한 액세스를 제어하고 학생들이 승인되지 않은 리소스를 사용하는 것을 방지합니다.
드림위버 CS6
시각적 웹 개발 도구
Atom Editor Mac 버전 다운로드
가장 인기 있는 오픈 소스 편집기
