Explication graphique et textuelle détaillée des paramètres d'encodage pour l'installation de MySQL

1. Installation de MySQL

Téléchargez Mac OS Suivez les instructions pour installer. Une fois l'installation terminée, vous pouvez démarrer et arrêter le serveur MySQL sous le panneau de configuration,

En parallèle, installez le client : MySQL Workbench.app,

Démarrez le serveur MySQL, ouvrez MySQL Workbench, saisissez le mot de passe initial , puis vous serez invité à modifier le mot de passe initial.

2. Définissez le chemin de connexion sous Terminal :

Créez un nouveau fichier dans /Users/**/ : .bash_profile

Saisissez le fichier :

export PATH=${PATH}:/usr/local/mysql/bin

Enregistrez simplement. Sous Terminal, vous pouvez utiliser "mysql -u root -p" pour vous connecter.

3. Problème d'encodage de la base de données

Connectez-vous au client MySQL (mysql -u root -p) dans Terminal pour afficher l'encodage de la base de données. La commande est la suivante :

mysql> SHOW VARIABLES LIKE 'char%';

Trouvé

character_set_database | latin1
character_set_server | latin1

Vous devez définir l'encodage, mais il n'y a pas de fichier my.cnf dans le fichier d'installation De nombreuses solutions sur Internet sont inutiles et vous ne pouvez créer que le vôtre. fichier cnf.

Fermez le serveur MySQL, utilisez MacVim pour créer my.cnf, saisissez le contenu suivant :

# Example MySQL config file for medium systems.  
  #  
  # This is for a system with little memory (32M - 64M) where MySQL plays  
  # an important part, or systems up to 128M where MySQL is used together with  
  # other programs (such as a web server)  
  #  
  # MySQL programs look for option files in a set of  
  # locations which depend on the deployment platform.  
  # You can copy this option file to one of those  
  # locations. For information about these locations, see:  
  # http://dev.mysql.com/doc/mysql/en/option-files.html    #  
  # In this file, you can use all long options that a program supports.  
  # If you want to know which options a program supports, run the program  
  # with the "--help" option.  
  # The following options will be passed to all MySQL clients  
  [client]  default-character-set=utf8
  #password   = your_password  
  port        = 3306  
  socket      = /tmp/mysql.sock   
  # Here follows entries for some specific programs  
  # The MySQL server  
  [mysqld]
  character-set-server=utf8
  init_connect='SET NAMES utf8
  port        = 3306  
  socket      = /tmp/mysql.sock  
  skip-external-locking  
  key_buffer_size = 16M  
  max_allowed_packet = 1M  
  table_open_cache = 64  
  sort_buffer_size = 512K  
  net_buffer_length = 8K  
  read_buffer_size = 256K  
  read_rnd_buffer_size = 512K  
  myisam_sort_buffer_size = 8M  
  character-set-server=utf8  
  init_connect='SET NAMES utf8' # Don't listen on a TCP/IP port at all. This can be a security enhancement,  # if all processes that need to connect to mysqld run on the same host.  
# All interaction with mysqld must be made via Unix sockets or named pipes.  
# Note that using this option without enabling named pipes on Windows  
# (via the "enable-named-pipe" option) will render mysqld useless!  #   
#skip-networking  

  # Replication Master Server (default)  
  # binary logging is required for replication  
  log-bin=mysql-bin  

    # binary logging format - mixed recommended  
    binlog_format=mixed  

      # required unique id between 1 and 2^32 - 1  
      # defaults to 1 if master-host is not set  
      # but will not function as a master if omitted  
      server-id   = 1  

    # Replication Slave (comment out master section to use this)  
    #  
    # To configure this host as a replication slave, you can choose between  
    # two methods :  
    #  
    # 1) Use the CHANGE MASTER TO command (fully described in our manual) -  
    #    the syntax is:  
    #  
    #    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,  
    #    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;  
    #  
    #    where you replace <host>, <user>, <password> by quoted strings and  
    #    <port> by the master&#39;s port number (3306 by default).      #  
    #    Example:  
    #  
    #    CHANGE MASTER TO MASTER_HOST=&#39;125.564.12.1&#39;, MASTER_PORT=3306,  
    #    MASTER_USER=&#39;joe&#39;, MASTER_PASSWORD=&#39;secret&#39;;  
    #  
    # OR  
    #  
    # 2) Set the variables below. However, in case you choose this method, then  
    #    start replication for the first time (even unsuccessfully, for example  
    #    if you mistyped the password in master-password and the slave fails to  
    #    connect), the slave will create a master.info file, and any later  
    #    change in this file to the variables&#39; values below will be ignored and      #    overridden by the content of the master.info file, unless you shutdown  
    #    the slave server, delete master.info and restart the slaver server.  
    #    For that reason, you may want to leave the lines below untouched  
    #    (commented) and instead use CHANGE MASTER TO (see above)  
    #  
    # required unique id between 2 and 2^32 - 1  
    # (and different from the master)  
    # defaults to 2 if master-host is set  
    # but will not function as a slave if omitted  
    #server-id       = 2  
    #  
    # The replication master for this slave - required  
    #master-host     =   <hostname>  
    #  
    # The username the slave will use for authentication when connecting  
    # to the master - required  
    #master-user     =   <username>  
    #  
    # The password the slave will authenticate with when connecting to  
    # the master - required  
    #master-password =   <password>  
    #  
    # The port the master is listening on.  
    # optional - defaults to 3306  
    #master-port     =  <port>  
    #  
    # binary logging - not required for slaves, but recommended  
    #log-bin=mysql-bin  

      # Uncomment the following if you are using InnoDB tables  
      #innodb_data_home_dir = /usr/local/mysql/data  
      #innodb_data_file_path = ibdata1:10M:autoextend  
      #innodb_log_group_home_dir = /usr/local/mysql/data  
      # You can set .._buffer_pool_size up to 50 - 80 %  
      # of RAM but beware of setting memory usage too high  
      #innodb_buffer_pool_size = 16M  
      #innodb_additional_mem_pool_size = 2M  
      # Set .._log_file_size to 25 % of buffer pool size  
      #innodb_log_file_size = 5M  
      #innodb_log_buffer_size = 8M  
      #innodb_flush_log_at_trx_commit = 1  
      #innodb_lock_wait_timeout = 50  

        [mysqldump]  
        quick  
        max_allowed_packet = 16M  

          [mysql]  
          no-auto-rehash  
          # Remove the next comment character if you are not familiar with SQL  
          #safe-updates  
          default-character-set=utf8   

        [myisamchk]  
        key_buffer_size = 20M  
        sort_buffer_size = 20M  
        read_buffer = 2M  
        write_buffer = 2M  

          [mysqlhotcopy]  
          interactive-timeout

Enregistrez et sauvegardez le fichier dans le répertoire /etc/, redémarrez le serveur mysql, la modification est réussie,

Si vous ne parvenez toujours pas à insérer des caractères chinois, veuillez recréer la base de données et la table.

Ce qui précède est le contenu détaillé de. pour plus d'informations, suivez d'autres articles connexes sur le site Web de PHP en chinois!