Maison  >  Article  >  développement back-end  >  Explication détaillée des exemples de framework APScheduler utilisé pour la planification en python

Explication détaillée des exemples de framework APScheduler utilisé pour la planification en python

Y2J
Y2Joriginal
2017-04-22 09:44:572193parcourir

Cet article présente principalement l'explication détaillée de l'utilisation du framework de planification python APScheduler. L'éditeur pense que c'est assez bon. Maintenant, je vais le partager avec vous et le donner comme référence. Suivons l'éditeur pour y jeter un œil

Récemment, j'ai étudié l'utilisation du framework de planification python APScheduler, donc aujourd'hui peut être considéré comme une note d'étude !

# coding=utf-8
"""
Demonstrates how to use the background scheduler to schedule a job that executes on 3 second
intervals.
"""

from datetime import datetime
import time
import os

from apscheduler.schedulers.background import BackgroundScheduler


def tick():
  print('Tick! The time is: %s' % datetime.now())


if name == 'main':
  scheduler = BackgroundScheduler()
  scheduler.add_job(tick, 'interval', seconds=3)  #间隔3秒钟执行一次
  scheduler.start()  #这里的调度任务是独立的一个线程
  print('Press Ctrl+{0} to exit'.format('Break' if os.name == 'nt' else 'C'))

  try:
    # This is here to simulate application activity (which keeps the main thread alive).
    while True:
      time.sleep(2)  #其他任务是独立的线程执行
      print('sleep!')
  except (KeyboardInterrupt, SystemExit):
    # Not strictly necessary if daemonic mode is enabled but should be done if possible
    scheduler.shutdown()
    print('Exit The Job!')

Planification non bloquante, exécutée une fois à une heure spécifiée

# coding=utf-8
"""
Demonstrates how to use the background scheduler to schedule a job that executes on 3 second
intervals.
"""

from datetime import datetime
import time
import os

from apscheduler.schedulers.background import BackgroundScheduler

def tick():
  print('Tick! The time is: %s' % datetime.now())

if name == 'main':
  scheduler = BackgroundScheduler()
  #scheduler.add_job(tick, 'interval', seconds=3)
  scheduler.add_job(tick, 'date', run_date='2016-02-14 15:01:05')  #在指定的时间,只执行一次
  scheduler.start()  #这里的调度任务是独立的一个线程
  print('Press Ctrl+{0} to exit'.format('Break' if os.name == 'nt' else 'C'))

  try:
    # This is here to simulate application activity (which keeps the main thread alive).
    while True:
      time.sleep(2)  #其他任务是独立的线程执行
      print('sleep!')
  except (KeyboardInterrupt, SystemExit):
    # Not strictly necessary if daemonic mode is enabled but should be done if possible
    scheduler.shutdown()
    print('Exit The Job!')

Méthode non bloquante, exécutée à l'aide de cron

# coding=utf-8
"""
Demonstrates how to use the background scheduler to schedule a job that executes on 3 second
intervals.
"""
from datetime import datetime
import time
import os
from apscheduler.schedulers.background import BackgroundScheduler

def tick():
  print('Tick! The time is: %s' % datetime.now())

if name == 'main':
  scheduler = BackgroundScheduler()
  #scheduler.add_job(tick, 'interval', seconds=3)
  #scheduler.add_job(tick, 'date', run_date='2016-02-14 15:01:05')
  scheduler.add_job(tick, 'cron', day_of_week='6', second='*/5')
  '''
    year (int|str) – 4-digit year
    month (int|str) – month (1-12)
    day (int|str) – day of the (1-31)
    week (int|str) – ISO week (1-53)
    day_of_week (int|str) – number or name of weekday (0-6 or mon,tue,wed,thu,fri,sat,sun)
    hour (int|str) – hour (0-23)
    minute (int|str) – minute (0-59)
    second (int|str) – second (0-59)
    
    start_date (datetime|str) – earliest possible date/time to trigger on (inclusive)
    end_date (datetime|str) – latest possible date/time to trigger on (inclusive)
    timezone (datetime.tzinfo|str) – time zone to use for the date/time calculations (defaults to scheduler timezone)
  
    *  any  Fire on every value
    */a  any  Fire every a values, starting from the minimum
    a-b  any  Fire on any value within the a-b range (a must be smaller than b)
    a-b/c  any  Fire every c values within the a-b range
    xth y  day  Fire on the x -th occurrence of weekday y within the month
    last x  day  Fire on the last occurrence of weekday x within the month
    last  day  Fire on the last day within the month
    x,y,z  any  Fire on any matching expression; can combine any number of any of the above expressions
  '''
  scheduler.start()  #这里的调度任务是独立的一个线程
  print('Press Ctrl+{0} to exit'.format('Break' if os.name == 'nt' else 'C'))

  try:
    # This is here to simulate application activity (which keeps the main thread alive).
    while True:
      time.sleep(2)  #其他任务是独立的线程执行
      print('sleep!')
  except (KeyboardInterrupt, SystemExit):
    # Not strictly necessary if daemonic mode is enabled but should be done if possible
    scheduler.shutdown()
    print('Exit The Job!')

Méthode bloquante, exécuter une fois toutes les 3 secondes

# coding=utf-8
"""
Demonstrates how to use the background scheduler to schedule a job that executes on 3 second
intervals.
"""
from datetime import datetime
import os
from apscheduler.schedulers.blocking import BlockingScheduler

def tick():
  print('Tick! The time is: %s' % datetime.now())

if name == 'main':
  scheduler = BlockingScheduler()
  scheduler.add_job(tick, 'interval', seconds=3)
  
  print('Press Ctrl+{0} to exit'.format('Break' if os.name == 'nt' else 'C'))

  try:
    scheduler.start()  #采用的是阻塞的方式,只有一个线程专职做调度的任务
  except (KeyboardInterrupt, SystemExit):
    # Not strictly necessary if daemonic mode is enabled but should be done if possible
    scheduler.shutdown()
    print('Exit The Job!')

Adopter la méthode de blocage, exécuter une seule fois

# coding=utf-8
"""
Demonstrates how to use the background scheduler to schedule a job that executes on 3 second
intervals.
"""
from datetime import datetime
import os
from apscheduler.schedulers.blocking import BlockingScheduler

def tick():
  print('Tick! The time is: %s' % datetime.now())

if name == 'main':
  scheduler = BlockingScheduler()
  scheduler.add_job(tick, 'date', run_date='2016-02-14 15:23:05')
  print('Press Ctrl+{0} to exit'.format('Break' if os.name == 'nt' else 'C'))
  try:
    scheduler.start()  #采用的是阻塞的方式,只有一个线程专职做调度的任务
  except (KeyboardInterrupt, SystemExit):
    # Not strictly necessary if daemonic mode is enabled but should be done if possible
    scheduler.shutdown()
    print('Exit The Job!')

Adopter la méthode de blocage, utiliser la méthode de planification cron

# coding=utf-8
"""
Demonstrates how to use the background scheduler to schedule a job that executes on 3 second
intervals.
"""
from datetime import datetime
import os
from apscheduler.schedulers.blocking import BlockingScheduler
def tick():
  print('Tick! The time is: %s' % datetime.now())
if name == 'main':
  scheduler = BlockingScheduler()
  scheduler.add_job(tick, 'cron', day_of_week='6', second='*/5')
  '''
    year (int|str) – 4-digit year
    month (int|str) – month (1-12)
    day (int|str) – day of the (1-31)
    week (int|str) – ISO week (1-53)
    day_of_week (int|str) – number or name of weekday (0-6 or mon,tue,wed,thu,fri,sat,sun)
    hour (int|str) – hour (0-23)
    minute (int|str) – minute (0-59)
    second (int|str) – second (0-59)
    
    start_date (datetime|str) – earliest possible date/time to trigger on (inclusive)
    end_date (datetime|str) – latest possible date/time to trigger on (inclusive)
    timezone (datetime.tzinfo|str) – time zone to use for the date/time calculations (defaults to scheduler timezone)
  
    *  any  Fire on every value
    */a  any  Fire every a values, starting from the minimum
    a-b  any  Fire on any value within the a-b range (a must be smaller than b)
    a-b/c  any  Fire every c values within the a-b range
    xth y  day  Fire on the x -th occurrence of weekday y within the month
    last x  day  Fire on the last occurrence of weekday x within the month
    last  day  Fire on the last day within the month
    x,y,z  any  Fire on any matching expression; can combine any number of any of the above expressions
  '''
  
  print('Press Ctrl+{0} to exit'.format('Break' if os.name == 'nt' else 'C'))

  try:
    scheduler.start()  #采用的是阻塞的方式,只有一个线程专职做调度的任务
  except (KeyboardInterrupt, SystemExit):
    # Not strictly necessary if daemonic mode is enabled but should be done if possible
    scheduler.shutdown()
    print('Exit The Job!')

Ce qui précède est le contenu détaillé de. pour plus d'informations, suivez d'autres articles connexes sur le site Web de PHP en chinois!

Déclaration:
Le contenu de cet article est volontairement contribué par les internautes et les droits d'auteur appartiennent à l'auteur original. Ce site n'assume aucune responsabilité légale correspondante. Si vous trouvez un contenu suspecté de plagiat ou de contrefaçon, veuillez contacter admin@php.cn