Home >Topic List >What's going on with the red light on the light signal?
What's going on with the red light on the light signal?
The reasons why the optical signal lights up in red are: 1. The optical fiber is broken; 2. The optical fiber pigtail is not inserted into the optical cat; 3. The optical cat is faulty; 4. The uplink optical splitter is faulty. The solution: 1. Check whether the fiber optic cable behind the fiber optic modem is folded or squeezed; 2. Refresh or restart the broadband port; 3. Ask staff to come to repair.
What's going on with the red light on the light signal?The red light on the optical signal may be that the optical fiber is broken or the optical fiber pigtail is not inserted into the optical modem. The solution is: 1. Check whether the optical fiber line behind the optical fiber modem is folded or squeezed; 2. Refresh or restart the broadband port; 3. Request staff to come to repair.
If the los light is on and the red light is flashing, does it mean there is arrears?The flashing red light of the los light is not due to arrears, but a fault. The reasons for the flashing red light are: 1. There is a problem with the optical interface of the optical modem, and the optical modem needs to be replaced; 2. The optical modem connector of the indoor pigtail connection is loose, and the optical modem connector is loose. The connector can be restored after being plugged in; 3. Some of the indoor optical fibers are bent too much, just straighten the optical fibers; 4. If some of the outdoor optical fibers are broken or the optical port of the equipment in the computer room is faulty, you need to contact the staff for troubleshooting.
What is the reason why the light signal turns red?The reasons why the optical signal lights up in red are: 1. The optical fiber is broken; 2. The optical fiber pigtail is not inserted into the optical cat; 3. The optical cat is faulty; 4. The uplink optical splitter is faulty. The solution: 1. Check whether the fiber optic cable behind the fiber optic modem is folded or squeezed; 2. Refresh or restart the broadband port; 3. Ask staff to come to repair.
What does the flashing red light of light signal mean?The flashing red light of the light signal means that the light signal is interrupted. Reasons and solutions: 1. The indoor pigtail connection optical modem connector is loose or has poor contact. You need to unplug the interface, clean it and then plug it back in; 2. Excessive bending of the optical fiber affects the transmission of optical signals. Just straighten the optical fiber. ; 3. If the optical fiber is broken, you need to contact maintenance personnel for rewiring; 4. There is a problem with the optical modem optical interface, please contact maintenance personnel to repair or replace an optical modem; 5. Broadband arrears, just pay the arrears; 6. Regional broadband failure Or system problem, wait for maintenance personnel to repair the broadband.
etc. What’s the reason for the red light flashing?The main reason why the etc red light flashes is that the ETC card is not inserted in place. You can re-plug the ETC card. When the ETC is inserted in place, the green light flashes once, and then there is a corresponding prompt, such as prompting that the card Is it a charge card or a savings card.
Related Resource DownloadsMore>
Related TutorialsMore>
- 07-27
- 03-20
- 03-01
- 11-09
- 10-21