Home >Topic List >Why is there no signal on the monitor after turning on the computer?
Why is there no signal on the monitor after turning on the computer?
Reasons why there is no signal on the monitor after the computer is turned on: 1. The host connection of the monitor data cable is loose or has poor contact; 2. The memory module is loose or there is too much dust; 3. The display screen is faulty. It is recommended to find a professional maintenance personnel for repair; 4. If the motherboard is faulty, it is recommended to contact professional maintenance personnel for repair. This topic provides you with relevant articles, downloads, and course content for you to download and experience for free.
Why is there no signal on the monitor after turning on the computer?Reasons why there is no signal on the monitor after the computer is turned on: 1. The host connection of the monitor data cable is loose or has poor contact; 2. The memory module is loose or there is too much dust; 3. The display screen is faulty. It is recommended to find a professional maintenance personnel for repair; 4. If the motherboard is faulty, it is recommended to contact professional maintenance personnel for repair.
What is the reason why the monitor has no signal and the host is normal?Reasons why the monitor has no signal and the host is normal: 1. There is no signal input, you can try to restart the host and check the connection; 2. There is a signal cable connection problem, make sure the signal cable plug is correctly connected to the host and the monitor; 3. There is a monitor setting problem, try to manually select the correct one input source. 4. Monitor failure, you can try to change a monitor; 5. Graphics card problem, try to connect the monitor to the integrated graphics card; 6. Driver problem, install the latest graphics card driver; 7. Hardware failure, you can connect the monitor to another A completely normal host.
How to solve the problem of no signal on computer monitorAfter connecting the computer monitor, many friends will encounter the problem of no signal on the computer monitor and cannot use it. The following is a solution to the problem of no signal on the computer monitor. Let’s take a look. How to solve the problem of no signal on the computer monitor: 1. First check if there is any problem with the monitor's film, and see if the power supply is plugged in properly or if it is loose. You can try to pull it out, clean it, and then plug it back in. 2. When pulling it out, you can also first check whether the interface and circuit are damaged, and whether the interface on the motherboard behind the host is rusted or damaged. 3. Open the side cover of the host and check whether all the interfaces on the motherboard are intact, mainly whether the memory module is loose. If you are not worried, you can plug and unplug it. 4. Finally, let’s take a look at the independent graphics card and main
What is the reason for no signal on the monitor?When we use computers, sometimes we may encounter problems with the computer monitor, for example, the computer monitor does not light up and has no signal. For this kind of problem, the editor thinks that we can re-plug and unplug all the data lines of the computer monitor to try to see if it is due to poor circuit contact. Or you can check to see if the host is not powered on. Let’s take a look at the detailed steps to see how the editor did it~ Why does the computer monitor not light up and have no signal? 1. The data cable is damaged. Check whether the connection cable between the computer and the monitor is loose or cracked. 2. The graphics card is damaged. Open the computer cover and turn on the computer. Don't forget to discharge static electricity before covering it, and check whether the motherboard, graphics card, and power supply have any strangeness or smell. Check whether the memory module, graphics card, hard drive cable, and CPU heat sink are loose. 3.
How to solve the problem of no signal when connecting the monitor to the win7 system hostHow to solve the problem of no signal when connecting the display to the win7 system host? Only after our host successfully connects to the monitor can it display normal images. Some users found that after they connected the line, the monitor still showed no signal. Many friends don’t know how to operate in detail. The editor below has sorted out the solution to the problem of no signal when connecting the display to the win7 system host. If you are interested, follow the editor to take a look below! Solution to the problem of no signal when connecting the display to the win7 system host 1. First, check whether the display cable and the display interface are tightly connected. Note: Many times, the monitor has no signal because the plug is loose. 2. If there is no problem with the monitor plug connection! It is necessary to connect the wiring of the monitor connector
Related Resource DownloadsMore>