How to turn on OTG on Huawei nova8_How to turn on OTG on Huawei nova8

Many Huawei users want to know how to enable the OTG function when using nova8. This article is provided by PHP editor Zimo to give you a detailed introduction, allowing you to easily connect external storage devices and other peripherals.

Huawei nova8 supports OTG function and is turned on by default. There is no special setting switch. Users only need to plug in the adapter cable and connect the device. The phone will automatically turn on the recognition, and the maximum output current when powering in reverse is 1A/5V. .

If there is a connection problem, it may be due to the use of an unofficial OTG cable or adapter, problems with the USB device itself, etc. Please refer to the following. Steps to troubleshoot:

1. Please confirm whether the interface type of the mobile phone is USB interface or Type-c interface, and choose a suitable OTG adapter cable according to the interface.

2. The mobile phone will provide voltage for the USB storage device. You can replace other devices and try to connect. If other devices are connected normally, it may be the reason for the limitation of the device itself.

3. If all devices cannot be connected, you need to replace the OTG cable and try to reconnect.

4. If a USB flash drive is connected, check whether the USB flash drive is connected normally to other mobile phones or computers. If it still cannot be recognized, the USB flash drive may be damaged. Try replacing the USB flash drive.

The above is the detailed content of How to turn on OTG on Huawei nova8_How to turn on OTG on Huawei nova8. For more information, please follow other related articles on the PHP Chinese website!