How to assemble the Forest House fish tank?

Many friends will encounter difficulties in assembly when they first come into contact with the Forest House fish tank. In response to this situation, PHP editor Banana has specially prepared a detailed assembly guide for everyone. The following content will guide you step by step to complete the assembly of the Forest House fish tank, solve the problems encountered during the assembly process, and make the assembly process easy and worry-free.

How to assemble the Forest House fish tank?

1. Open the package.

The fish tank is divided into two parts: the tank body and the cabinet. After opening the package, do not lift the tank body onto the cabinet yet. First use cardboard or foam to evenly place it on the ground, and then place the tank on top. Pay attention to the four corners of the fish tank, especially the foam pads.

2. Install the upper and lower water pipes in the tank.

Find the small black gasket in the tank, pull out the black sleeve from the left rear corner of the fish tank by two-thirds, put the gasket on the thread, and wrap it with water tape. Then carefully turn the thin black water hose onto the threads. It's fine, but don't use too much force. (Because the plastic joints of many fish tank pipes are relatively brittle, if you use too much force, the joints may be broken.) Then push the black sleeve back into place and connect the elbow. The installation method of sewer pipe is the same as above, except that no elbow is required. (If you are worried about water leakage from the joint, you can apply glass glue directly on the threaded opening)

3. Install the lamp.

Lift out the fish tank cover smoothly and place it upside down. At the same time, rotate the lamp cover on the lamp cover and put it on the lamp tube. Then install the lamp tube on the lamp cover and tighten the lamp cover.

4. The test light is on.

Electrify the lamp cover, turn on the power switch, and see if each lamp will light up. If not, please turn on the power and turn on the switch to rotate the lamp until the light turns on.

How much does it cost to assemble a computer?

Graphics card rtx2060 2500 yuan (supports ray tracing)

cpu R5 3600 1400 yuan

Motherboard: B450 600 yuan

m.2 Solid state drive 500G 600 Yuan

4T mechanical hard drive 600 yuan

Main case with fan + power supply 600w 500 yuan

Memory stick 8G two, 500 yuan

Keyboard and mouse 100 Yuan

List for assembling a computer?

Assembling a computer does require a checklist, because when we assemble the computer, after determining the configuration and operation requirements of the computer, we can purchase some suitable motherboards online, and then determine the power supply, graphics card and other configurations based on the motherboard. If you ask, just make a list and ask the computer factory or dealer directly to buy it

Assemble the computer, okay?

Assembling a computer can have some benefits, such as:

1. Customized configuration: Assembling a computer can choose the appropriate hardware configuration according to personal needs, and you can choose more based on your own purpose and budget. Suitable components.

2. Cost-effectiveness: Assembling a computer is more cost-effective than purchasing a brand-name machine. You can save costs by choosing hardware with higher cost-effectiveness.

3. Upgradeability: Assembling a computer is usually easier to upgrade the hardware. The hardware can be upgraded or replaced at any time as needed to improve the performance of the computer.

4. High degree of freedom: When assembling a computer, you can choose the appearance design, color matching, etc. according to your personal preferences, and you can create a unique computer.

However, there are also some challenges and risks in assembling a computer, such as requiring certain professional knowledge and skills, choosing inappropriate hardware that may cause compatibility issues or poor performance, possible risks during the assembly process, etc. . Therefore, if you do not have enough experience and skills, or do not know much about computer hardware, it may be more suitable to buy a branded machine.

Computer bed assembly?

There are drawings when you buy a computer desk, just assemble it according to the drawings

How to assemble a computer?

1. First connect the VGA cable to the monitor, and then fix the two screws at the back. The main reason for fixing is to worry about the connecting wire falling off when moving.

2. Then connect the other end of the VGA cable to the computer host.

3. Next, connect the power cord to the monitor. (Note that you are only connecting to the monitor. Do not connect the other end of the power cord to the socket. Wait until all connections are completed before turning on the power.)

4. Next, connect the mouse to the host.

5. Connect the keyboard as well. (The green one is the mouse, and the purple one is the keyboard. Also note that the internal pins of the mouse and keyboard plugs must be aligned with the pinholes in the interface before they can be inserted.) Connect one end of the network cable to the RJ45 interface of the computer host, and then connect the other end to the switch or router or modem.

6. Next, connect the power cord of the host.

7. Next, you can connect the power plugs of the host and monitor to the sockets to power on the host and monitor. You can start and use it normally.

Assemble computer configuration?

CPU Memory Motherboard Solid State Drive Power Supply and Chassis

2021 Most cost-effective computer assembly recommendations?

To assemble this kind of computer with the highest cost performance in 2021, I recommend assembling Huawei’s. The computer is better because Huawei’s electronic products are of particularly good quality and relatively reliable, especially Huawei's computer spare parts are currently very good in China, so I recommend using Huawei's computer assembly, especially because its cost performance is relatively high, and the configuration of the assembly is also relatively high

Is there a big difference between assembling a tablet computer and assembling a desktop computer?

Desktop computers: including branded machines and assembled machines. Branded machines generally have poor configurations and low cost performance, so sell only one brand. The assembly machine is cost-effective and has good performance. Of course, the premise is that you know the knowledge of DIY configuration hardware.

Laptop computers: Highly portable, generally used for office work, poor gaming performance, and the configuration of assembled computers of the same price is much higher than that of notebooks.

All-in-one computer: It is a brand-name computer. It is expensive and has low configuration. It is not recommended to buy.

Tablet computer: It is a small, more portable personal computer than a laptop computer, with a touch screen as the basic input device. But it is different from the former system and has much fewer functions.

How to simulate computer assembly online_Simulate computer assembly configuration list?

1. There are too many places where you can simulate installation online. Search for Zhongguancun Online Simulation Installation and open it.

2. After opening, we can take a look at everyone's plans, and then simulate building a computer ourselves. Here we select the computer configuration the same way. Such as CPU, motherboard, memory, graphics card, hard drive, power supply, etc., accessories. as the picture shows.

3. Processor CPU, this is more critical. We choose INTEL core processor or AMD core processor according to our needs, select the CPU series, and then add our favorite CPU to the configuration list. . Today's CPUs are usually divided into boxed and bulk. It is recommended that you choose boxed CPU.

4. After adding the CPU to the configuration list, select the motherboard and set and select one by one.

5. Motherboard Here you have to decide whether to buy a motherboard with an integrated graphics card or a non-integrated motherboard graphics card. If the motherboard has an integrated graphics card, we can save the expense of buying a separate graphics card later. If we don’t finish big games, For home office, etc., we can just choose a motherboard with integrated graphics card, which should be enough for our daily use. The editor has seen many people who cannot finish online games at all, so they have to buy a motherboard with independent graphics card, which increases expenses.

6. In this way, all the required accessories will be added to the installation configuration list. If the keyboard and mouse are for home use, a set will cost around 50 yuan.

7. Finally, our installed configuration list will be displayed on the right. Of course, if you feel that the price is cheap, you can delete the accessories here, then reselect a better hardware configuration, replace the CPU or motherboard, etc. Just make the price meet your expectations and the computer can meet your daily needs.

The above is the detailed content of How to assemble the Forest House fish tank?. For more information, please follow other related articles on the PHP Chinese website!