How do you install the system after assembling a new computer?

For users who have just assembled a new computer, how to install the system is a big problem. PHP editor Xigua will introduce you in detail the steps to install the system on your new computer, helping you to easily install the system and give your computer a new lease of life.

How to install the system after assembling a new computer?

1. Open the downloaded Xiaobai system, plug the USB disk into the computer, and wait for a few seconds to check the local environment.

2. Select on the Xiaobai system interface, automatically recognize the U disk, click .

3. Select the win10 system professional version we need to install, and continue to click .

4. Start downloading the system image and driver, and making the U disk boot tool. Wait for the prompt to pop up when the creation is successful. Click on it. At this time, you can unplug the USB flash drive and insert it into the new computer where the system needs to be installed.

5. At this time, you can unplug the U disk and insert it into the new computer where the system needs to be installed. The Xiaobai system interface will appear. We choose to start win10x64PE (more than 2G memory) and press Enter to confirm.

How to install the system on a newly assembled computer?

1. You need to set the first startup item according to the tools for installing the operating system. The default is hard disk startup. You need to modify it to CD startup or U disk startup.

2. Then you need to insert the CD or U disk for installing the system. The operating system cannot be installed at this time. You need to partition the new hard disk first. The hard disk partition tool has been integrated in the installation software and can be used. It performs partitioning operations on new hard disks. Of course, you can also use instant partitioning, which you can choose according to the situation.

3. After completing the partitioning operation, you can officially install the operating system. There are various installation methods. You can install it to the C drive with one click. Of course, you can also choose GHOST to install manually according to your own situation. Make your selection and make sure you have partitioned and formatted the partition before installing.

4. The installation time may be slightly different depending on different operating systems. The approximate time is about half an hour. At this time, you can perform other activities first. Some operating systems may require you to fill in some sequences during installation. To operate, just find the serial number of the relevant version and fill it in.

5. After completing the installation of the operating system, you will come to the long-lost welcome page. After entering the operating system, you need to install the necessary drivers, such as sound card driver, graphics card driver, etc. Many operating systems are already in the installation process. The installation of the sound card and graphics driver is integrated, but some do not. If not, you need to install it yourself.

6. After completing the driver installation, you need to patch the system. This operation is very important because viruses may attack the system through loopholes and paralyze the computer, so patching is imperative. Before patching, you need to install anti-virus software and security guards. Use these software to detect which patches are not installed on your computer, and then install these patches.

7. At this point, the installation of the operating system has come to an end, and some necessary things have been installed.

How to install the system on a computer that I assembled myself?

Use pe system to install the operating system.

First make a pe system with a USB disk, and then use the pe system to boot the computer. After entering the pe system interface, use the hard disk partition tool to partition and advanced format the hard disk. After saving, install the operating system Copy the package to a partition other than the system, double-click to run, and follow the prompts to install.

How to install the system after assembling the computer?

After assembling the computer, you need to install the operating system for normal use. The following are some steps to install the operating system:

1. Prepare the installation media: If you have purchased the operating system installation CD or USB boot disk, you can use it directly; if not, you need to download the operating system image file first and It is written to a CD or USB bootable disk. Common operating systems include Windows, Linux, etc.

2. Set the boot sequence: Set the boot sequence in the BIOS to boot from the CD or USB boot disk. The specific operation method varies depending on the motherboard. Generally, you need to press F2, F10, Delete and other keys when booting to enter the BIOS setting interface.

3. Insert the installation media: Insert the installation CD or USB boot disk into the computer, and then press the power button to start the computer.

4. Install the operating system: Install the operating system according to the installation interface prompts. First, you need to select the installation language and regional settings, and then follow the installation wizard step by step to complete the installation. It should be noted that during the installation process, you will be prompted to select the installation location and partition settings. It is recommended to set them according to the actual situation.

5. Install the driver: After the installation is completed, you need to install the driver for the corresponding hardware to ensure the normal operation of the hardware. You can download the latest drivers from the official websites of hardware manufacturers such as motherboards, graphics cards, sound cards, etc., and then install them according to the prompts.

It should be noted that before installing the operating system, it is recommended to back up important data to avoid accidental loss. In addition, the installation steps of different operating systems may be slightly different. For specific operation methods, you need to refer to the installation guide of the operating system.

How to install the system after the computer is assembled?

First of all, you need to prepare an 8 GB U disk. If you are a novice, you can only go to an Internet cafe, or download the Laomaotao U disk PE system from the computers of colleagues and friends, or Chinese cabbage, U disk PE system, these two PE systems are the simplest and easiest to operate. They do not require complicated settings. You only need to download two softwares. For either one, install the U disk to the USB interface and proceed to the next step through the software prompts. , after the installation is completed, you can test whether the U disk PE system is installed through simulated startup

Of course, these two PE systems will release third-party software installations, such as 2345 browser, after the system is installed. Or 360 security software, some software installed on the C drive by default

You can also choose the relatively pure PE system installation software of micro PE. After the installation is completed, test the normal startup, and then copy the downloaded image system Go to, U disk

If you don’t use the U disk as the first boot item, enter the BIOS settings, just restart the computer and use the keyboard shortcuts

Ecs, F9, If you press F10, F11, F12, or delete while the hardware self-test is in progress, it will switch to the U disk boot mode. Select the U disk as the startup item to enter the PE system.

After entering the PE system, Assume that you are installing a 256GB solid-state drive and the installation system is WINDOWS 10. Then set the space of the C drive to 60 GB to 80 GB to ensure that in the future use of the system, it will not easily cause insufficient space on the C drive. phenomenon, affecting the system's operating data exchange, resulting in slow operation, and use the HD hard disk tool built into the PE system to select 4096 when partitioning the hard disk, which is the 4K alignment mode for partitioning, to avoid failure of the hard disk caused by not selecting 4K alignment. A series of situations such as slower reading and writing speeds occur

After the partition is completed, use the PE system's built-in system installation tool to copy the image file. Do not restart directly after copying. Select the startup file repair tool to repair the boot file. Perform a repair boot to avoid failure to recognize the boot file during the restart process, causing the system installation to fail.

How to install the system after the computer is assembled?

After the computer is assembled, you can use a U disk or CD, choose different startup methods to start the PE virtual desktop, and select the installed system in this desktop for installation. It takes about 10 to 20 minutes to install a W7 system.

How to install the pre-installed system when assembling a computer hard drive?

If the operating system has been pre-installed on the hard disk you bought, you need to follow the following steps to install it when assembling the computer:

1. Connect your hard disk to the computer motherboard, And make sure other hardware devices are also connected correctly.

2. Turn on the computer and enter the BIOS setting interface (usually press DEL, F2, F12, etc. to enter), select the "Boot" tab, and set the first item in "Boot priority" to "Hard" Drive".

3. Save and exit BIOS settings. When restarting the computer, the system will automatically boot from the hard disk.

4. After the system starts, if your pre-installed system is a Windows operating system and it is volume licensed, then the system does not need to be activated again. If your pre-installed system is a stand-alone version, you need to follow the prompts to activate it.

5. If the pre-installed system is not the version or language you want, you can reinstall a new system version or try to change the language settings. It should be noted that if you want to retain the data on the hard drive when reinstalling or changing the system version, you need to back up the data in advance.

In short, if the operating system has been pre-installed on your hard disk, you only need to follow the above steps to install and set up, it is very simple.

After assembling the computer, what should be done to the hard drive before installing the system?

You should partition first and format the partition where the system is installed before installing the system.

1. If you use a pure version of the non-GHOST version to install the system, there are special steps to partition and format the hard disk during the installation process. In this step, you can partition and format the hard disk. Format FAT32 and NTFS file system formats can also be selected when formatting.

2. If you use the GHOST version to install the system, you must first partition and format the hard disk, and then install the system. Third-party software can be used for partitioning and formatting, which is included in the GHOST installation system itself.

3. When partitioning, the partition for installing the WIN7 system should generally be around 40G-60G in size. The specifics can be determined based on your actual situation and the size of the hard disk. The file system should generally use the NTFS file system.

How to install a pirated system on a newly purchased computer assembly machine?

Steps to check whether your system is genuine or pirated:

1. Return to the desktop, hold down the ALT key, and then double-click "Computer" to open the "System" property interface .

2. Pull the scroll bar on the right to the bottom, and you can see the words "Genuine Authorization".

3. If it is a brand machine, the CD sent is genuine.

4. If the system installed on the computer is different from the one on the CD, then the system installed on the computer may be a pirated version installed later.

How to install the genuine win11 system on an assembled computer?

Assemble the computer and install the genuine win11 system. You need to prepare an installation disk, then insert the installation disk into the optical drive. After booting, follow the prompts to install. After the installation is completed, enter the genuine serial number to complete the installation.

The above is the detailed content of How do you install the system after assembling a new computer?. For more information, please follow other related articles on the PHP Chinese website!