Apple imac and assembled computer? Illustration of disassembling and assembling a computer?

Tangled between Apple iMac and building a computer? Don't worry, PHP editor Zimo is here to answer your doubts. We will provide an in-depth comparison of the advantages and disadvantages of the two, walk you through the steps of assembling your computer, and provide detailed disassembly and assembly guides. Read this article to sort out your options and make the decision that best suits your needs.

Apple imac and assembled computer?

Your question is relatively easy to answer. Because it is a comparison between a mac and an assembled desktop computer, not a comparison between a mac and a windows laptop or a comparison between a mac and a windows system. Macs and assembled desktop computers are highly differentiated. (Unless you want to buy an Imac or a trash can)

The notebook is portable, and the assembled machine can only be kept at home. Mac is not friendly for playing games, but it is fun to assemble the machine to play games

Mac was born for programmers and designers (hopefully, please). You have both. If you don’t have a strong need for playing games, then Just use a Macbook pro with a big monitor.

Illustration of disassembling and assembling a computer?

1. Disconnect the power of the computer, unplug the mouse, keyboard and other external devices connected to the host. Note that when unplugging the network cable, press and hold the clip of the crystal head, and then open the computer case.

2. First unplug the motherboard and CPU power supplies. Note that you should press and hold the clip on the power plug when unplugging it.

3. Remove the memory module, graphics card and other boards. Release the static electricity on your body, open the clips on both sides of the memory module, and take out the memory module.

4. Use a screwdriver to remove the screws at the intersection of the graphics card and the chassis, and then pull out the graphics card vertically upwards. It should be noted that most graphics card slots have a clip to prevent the graphics card from loosening. Before pulling out the graphics card, you need to manually open the clip. The clips on different motherboards may be different, so watch carefully when opening them and don't use brute force.

5. To disassemble the CPU fan, you need to unplug the fan power supply first. Then carefully observe the installation method of the fan, find the relevant buttons and mechanisms, and pull it out evenly without using brute force.

6. Disassemble the CPU. Release the small lever next to the CPU socket and gently lift the CPU upwards and vertically. At this point, you can take a closer look at the structure of the CPU and CPU socket.

7. Remove the optical drive and hard disk. Unplug the optical drive, hard drive data cable and power cord (pay attention to applying even force when unplugging, preferably vertically to avoid damaging the relevant plugs), then loosen the fixing screws and take out the optical drive and hard drive from the chassis.

8. Remove the motherboard. First unplug each signal cable connected to the motherboard. When unplugging, pay attention to the plug-in position of each signal cable. Pay attention to the logo on the signal cable and the logo of the signal cable jack on the motherboard. It is best to write it down in a notebook. , to avoid errors during installation. Then use a screwdriver to remove the motherboard fixing screws, then gently pull the motherboard back and then lift it up.

9. To assemble the computer, refer to the method of disassembling the computer introduced earlier and install each component in reverse order.

Which one is better, assembled computer or branded computer?

Branded machines are complete machines that are uniformly configured and assembled by the manufacturer, and then bear the name of the manufacturer, such as the Lenovo Blade series, which is popular online, HP's Light and Shadow series, etc. An assembly machine is a computer in which users configure computer accessories and assemble it by themselves.

Because the brand machine is installed by the manufacturer, in order to show the sense of security that the manufacturer can bring, the after-sales service is generally relatively complete; in terms of quality, the quality of the brand machine varies, and the assembled machine can generally be selected Accessories with better quality;

From a cost-effective perspective, the price of a combined computer is cheaper than a branded computer, but you need to assemble it yourself. Of course, you can also go to a physical store and spend some money to ask the boss to help assemble it;

From a compatibility perspective, the compatibility of a combination computer will be much worse than that of a branded computer. Especially if the combination parts you buy are of inferior brands, the compatibility will be even worse.

How to install and assemble a desktop computer host?

1. First, take out the motherboard from the packaging box, place it frontally on a flat desktop, then open the CPU fixing lever, then take out the processor, and then install it into the motherboard slot, as shown in the figure below Show.

2. After the CPU is installed, lower the fixing rod to fix the CPU, then install the radiator fixing bracket, and then apply an appropriate amount of silicone grease to the surface of the CPU, as shown in the picture below.

3. Next, install the air-cooling radiator on the CPU, as shown in the picture below.

4. Memory installation

The next step is to install the 8G memory in the CPU slot of the motherboard. Since the memory module in the motherboard adopts a fool-proof design, the memory is the simplest. Install one of the hardware as shown in the picture below.

5. Power supply installation

After the CPU, radiator and memory are installed on the motherboard, the first large module is installed. Next, we first install the Huntkey MVP600 power supply to In the Huntkey MVP Pro gaming case, the power supply installation is also very simple. It is basically just a matter of fixing screws, as shown in the picture below.

6. Hard drive installation

After installing the power supply into the chassis, we will then install the solid-state drive inside the chassis. Hard drive installation is also very simple. Just screw the SSD into the chassis. Fix it on the quick-release mounting bracket, and then insert it into the hard disk slot of the chassis, as shown in the picture below.

7. Solid state drive installation diagram

8. Install the motherboard into the chassis

After installing the power supply and hard disk into the chassis, we can then install the motherboard module that has previously installed the CPU, radiator and memory module into the chassis. When installing the motherboard to the chassis, you mainly need to pay attention to the I/O baffle interface and fixing screws on the back of the chassis. As long as you are careful, it is basically not difficult.

9. Graphics card installation

After the motherboard is installed in the chassis and fixed, the next step is to install the graphics card. The GTX Titan X discrete graphics card is a high-end gaming graphics card with a domineering appearance, as shown in the picture below.

10. GTX Titan X independent graphics card

Although the length of the graphics card of GTX Titan . The installation of the graphics card is also very simple. Just insert the graphics card into the PCI interface of the motherboard and then fix it on the chassis, as shown in the picture below.

11. After the graphics card is installed, the last step is to connect it, mainly to connect the power supply to the power supply of various hardware, including the motherboard, hard disk, CPU, fan, motherboard jumpers, etc.

How to choose motherboard and cp when assembling a computer?

The cpu pins are symmetrical to the motherboard pins! Just pay attention to the number of stitches when choosing! For example, cpu1151 pin! When choosing a motherboard, choose 1151 pins.

How to choose the motherboard and CPU when assembling a computer?

The CPU is the core of the entire computer, so you definitely cannot use AMD, as that will lower the overall grade of the computer.

According to your budget, you can basically buy an I5 3470 CPU. Intel's I series are high-end CPUs, and I5 is the more mainstream one.

For graphics cards, you can purchase a 650 core according to your requirements.

The motherboard is to match the CPU. I5 CPUs are basically equipped with B75 motherboards.

CPU

Intel (Intel) Core i5-3470 22nm boxed CPU (LGA1155/3.2GHz/6M L3 cache)

￥1229.00

motherboard

GIGABYTE GA-B75M-D3V motherboard (Intel B75 /LGA 1155)

￥498.00

Graphics card

Galaxy GTX650 Black Will 1110MHz/5000MHz 1G/128bit DDR5 PCI-E graphics card

￥739.00

Memory

ADATA Game Veyron DDR3 1600 8G (4G×2 ) Desktop memory

￥449.00

Hard disk

Seagate 1TB ST1000DM003 7200 rpm 64M SATA 6Gb/sec desktop hard drive Jiandalande boxed genuine

￥435.00

Chassis

Cooler Master Destroyer Classic U3 Version Mid-Tower Computer Case (USB3.0/0.7MM Plate/12CM Fan) Black

￥199.00

Power supply

Antec VP 450P rated 450W 120mm silent fan active PFC power supply

￥269.00

Monitor If so, you should pay attention to the resolution, which must be the standard 1920*1080. This is the most important parameter of the monitor.

If you think the price is too high, you can buy a Yeston 6770 graphics card and only one 4G memory card, which can save nearly 400 yuan.

How much does it cost to assemble a computer?

Graphics card rtx2060 2500 yuan (supports ray tracing)

cpu R5 3600 1400 yuan

Motherboard: B450 600 yuan

m.2 Solid state drive 500G 600 Yuan

4T mechanical hard drive 600 yuan

Main case with fan + power supply 600w 500 yuan

Memory stick 8G two, 500 yuan

Keyboard and mouse 100 Yuan

List for assembling a computer?

Assembling a computer does require a checklist, because when we assemble the computer, after determining the configuration and operation requirements of the computer, we can purchase some suitable motherboards online, and then determine the power supply, graphics card and other configurations based on the motherboard. If you ask, just make a list and ask the computer factory or dealer directly to buy it

Assemble the computer, okay?

Assembling a computer can have some benefits, such as:

1. Customized configuration: Assembling a computer can choose suitable hardware configuration according to personal needs, and you can choose more based on your own purpose and budget. Suitable components.

2. Cost-effectiveness: Assembling a computer is more cost-effective than purchasing a brand-name machine. You can save costs by choosing hardware with higher cost-effectiveness.

3. Upgradeability: Assembling a computer is usually easier to upgrade the hardware. The hardware can be upgraded or replaced at any time as needed to improve the performance of the computer.

4. High degree of freedom: When assembling a computer, you can choose the appearance design, color matching, etc. according to your personal preferences, and you can create a unique computer.

However, there are also some challenges and risks in assembling a computer, such as requiring certain professional knowledge and skills, choosing inappropriate hardware that may cause compatibility issues or poor performance, possible risks during the assembly process, etc. . Therefore, if you do not have enough experience and skills, or do not know much about computer hardware, it may be more suitable to buy a branded machine.

Computer bed assembly?

There are drawings when you buy a computer desk, just assemble it according to the drawings

The above is the detailed content of Apple imac and assembled computer? Illustration of disassembling and assembling a computer?. For more information, please follow other related articles on the PHP Chinese website!