How to turn off your router correctly (steps and precautions for turning off your router)

How to turn off your router correctly: Protect device life and avoid security risks With the popularity of the Internet, routers have become an essential device in modern homes and offices. However, many users often overlook the importance of shutting down their router properly after using it. Turning off the router can not only extend the life of the device, but also effectively prevent security risks. In this article, PHP editor Apple will introduce in detail the steps and precautions for correctly shutting down the router to help you fully understand the necessity of shutting down the router.

1. Confirm that all devices have been disconnected

2. Save and exit the work in progress

3. While browsing Enter the router management address into the router

4. Log in to the router management interface

5. Find and click the “Shutdown” option

6. Wait a few seconds to ensure that the router has been completely shut down

7. Confirm that the indicator light has gone out

8. Turn off the power switch

9. Unplug the power plug from the socket

10. Reinstall all equipment Connect to the router

11. Turn on the power switch

12. Wait for a few minutes to ensure that the router starts normally

13. Check whether the indicator light displays normally

14. Log in to the router management interface through the browser to confirm whether the connection is normal

15. Close the workspace

1. Confirm that all devices have been disconnected

Make sure all devices connected to the router have been disconnected before turning off the router. Smart TVs, etc., mobile phones, to avoid data loss or device damage when turning off the router, including computers.

2. Save and exit ongoing work

Please make sure to save and exit all ongoing work in time if you are using the Internet for work or entertainment activities. And be prepared to turn off your router to avoid data loss.

3. Enter the router’s management address in the browser

Then enter the router’s management address in the address bar and open your browser. 1. Usually this address is a combination of numbers and periods, 168, such as 192, 1.

4. Log in to the router management interface

You need to enter your username and password to log in to the router management interface, and enter the correct router management address. The default username and password can be found on the back of the router or in the manual if you have not changed these login credentials.

5. Find and click the "Shutdown" option

Find and click "Shutdown" or a similar option in the router management interface. But there is usually an obvious shutdown option, and different router brands and models may have different interface layouts.

6. Wait a few seconds to ensure that the router has been completely shut down

Make sure that the router has been completely shut down, so please wait patiently for a few seconds after clicking Shut Down. Turning off the router takes some time.

7. Confirm that the indicator lights are off

Confirm whether they are all off and observe the indicator lights on the router. It may mean that the router is not completely shut down if any of the lights are still on. Please try turning off the router again in this case.

8. Turn off the power switch

You can cut off the power supply by manually turning off the power switch. Once you confirm that the router has been completely turned off. Just toggle it to the off position, most routers have an obvious power switch.

9. Pull out the power plug from the socket

Pull out the power plug of the router directly from the socket to ensure complete power outage. Protect the router's electronic components to avoid any potential conduction of electrical current to the device.

10. Reconnect all devices to the router

Reconnect all devices that were previously connected to the router after turning off the router. Smart TVs, etc., mobile phones, this includes computers. So that you can use the network smoothly when you start the router again and ensure that every device is connected normally.

11. Turn on the power switch

You can turn the power switch back on after all devices are reconnected to the router. Preparing it for normal startup, power will be supplied back to the router, like this.

12. Wait for a few minutes to ensure that the router starts normally.

It will take a certain amount of time to start it again after shutting down the router. Waiting two to three minutes will ensure that the router boots up and connects to the Internet normally, usually.

13. Check whether the indicators are displayed normally

Confirm whether they are displayed normally and observe the indicators on the router. The power light will turn on, and the lights related to the network connection will also start flashing, normally.

14. Log in to the router management interface through a browser to confirm whether the connection is normal

And enter the router management address recorded previously and open your browser. Confirm that you can successfully log in to the router management interface and enter the correct username and password. This indicates that the router has successfully booted and is connected to the Internet.

15. Close the workspace

End this operation. After confirming that the router has been shut down and started correctly, you can close the workspace. You can leave or engage in other activities with peace of mind, knowing that you have properly turned off the router, at this time.

Properly shutting down your router is an important step to protect your device and network security. You can ensure that your router shuts down completely and boots up properly, and avoid unnecessary security risks by following the steps described in this article. Turning off the router properly after each use is a basic requirement to maintain the life of the device and network security. Remember.

The above is the detailed content of How to turn off your router correctly (steps and precautions for turning off your router). For more information, please follow other related articles on the PHP Chinese website!