How do I enter the BIOS after installing my computer?

When installing the computer for the first time, it is crucial to enter the BIOS interface. However, for beginners, it can be confusing. PHP editor Banana will provide you with a step-by-step guide to help you easily enter the BIOS interface. By following this guide, you'll be able to quickly access BIOS settings and customize your computer.

How to enter the BIOS after installing the computer?

After the computer hardware is assembled, connect the power supply, turn it on and press the del key to enter the bios.

Assembled computers generally use the DEL key or TAB key to enter the BIOS. The following are several ways to enter the bios of a computer: Lenovo (press F12 when starting up and restarting) thinkpad (press F1 when starting up and restarting) HP (press F2 when starting up and restarting) SONY (press F2 when starting up and restarting) ) Dell (press F2 when starting and restarting) Acer (press F2 when starting and restarting) Toshiba (press ESC and then F1 when booting coldly) Compaq (press F10 when the flashing cursor appears in the upper right corner after booting, or press when booting F10) Fujitsu (Press F2 when starting and restarting) Most domestic and Taiwanese brands (Press F2 when starting and restarting)

Assemble the computer, how to drive it just after installation?

1. Install the system first, and then install the driver. The official driver will be installed first, and the driver wizard will not be allowed to do it automatically.

2. If there is a driver disk, you can install them all. It will not affect anything. If you know which ones you don’t need, you don’t have to choose to install them. If there is no driver disk, the driver wizard will install it completely without you having to worry about it.

3. You don’t need to worry about downloading the driver wizard yourself. You must download it yourself because you are assembling it. Just go to the official homepage of each component to search and download, such as the graphics card to search for the model number on the official homepage of the graphics card.

4. The graphics card has nothing to do with the monitor, but how do you see it without a monitor? So it must be connected, and then you install the graphics card driver. After installing the card driver, the monitor can be used. Before the graphics card driver is installed, the monitor will also display, because the system will come with its own driver for temporary use.

5. Depending on your level, it is recommended to burn it to a CD for installation, or you can also install it with a USB disk. Burn to a CD. If the BIOS is not set to boot from the optical drive, it may be troublesome. Now the motherboard defaults to booting from the optical drive. Since it is a system disk, set it to CD-ROM startup, put the CD into the CD-ROM drive, start the machine, and jump to the boot interface. Generally, if you can understand it, click Next.

How to connect to the Internet after installing the computer?

To connect your computer to the Internet, you need to complete the following steps:

1. Open the browser and visit the official website of the router (usually https://www.the official website of the router brand).

2. Enter the correct router model and serial number on the router's official website to log in and configure.

3. After the configuration is completed, check the router's manual to learn how to set up your home network connection, including IP address, DNS server, etc.

4. After the configuration is completed, enter the correct username and password to log in to the router’s management interface.

5. Find the "Network Settings" or "Network Configuration" option in the management interface to set up the network connection.

6. In the "Network Settings" or "Network Configuration" option, select the "Wi-Fi" option to configure the Wi-Fi network settings.

7. After the configuration is completed, you need to enter the correct Wi-Fi name and password so that others can connect to your network.

8. Finally, check whether the network connection is normal, you can use a browser to access the Internet, or use other network applications, such as social media or email.

The above is the detailed content of How do I enter the BIOS after installing my computer?. For more information, please follow other related articles on the PHP Chinese website!