


Want to assemble your own computer, but don’t know how to install the system? PHP editor Strawberry brings you a detailed installation tutorial, from making the startup disk to completing the installation, taking you step by step to easily complete it.
How to install the system on a computer that I assembled myself?
Use pe system to install the operating system.
First make a pe system with a USB disk, and then use the pe system to boot the computer. After entering the pe system interface, use the hard disk partition tool to partition and advanced format the hard disk. After saving, install the operating system Copy the package to a partition other than the system, double-click to run, and follow the prompts to install.
How to install the system after assembling the computer by yourself?
After assembling the computer yourself, you need to prepare an operating system installation disk or USB flash drive, insert it into the computer and start the computer.
When the computer is turned on, you can press the F12 or DEL key to enter the BIOS settings and choose to boot from the installation disk or U disk.
Then follow the steps prompted by the installer to install the operating system, including selecting the installation hard disk, allocating disk space, entering the product key, setting the user name and password, etc.
During the installation process, you need to pay attention to selecting the correct operating system version, such as Windows 10 Home Edition or Professional Edition.
After the installation is completed, drivers and other software need to be installed to enable the computer to run and be used normally.
How to install the system after assembling the computer?
After assembling the computer, you need to install the operating system for normal use. The following are some steps to install the operating system:
1. Prepare the installation media: If you have purchased the operating system installation CD or USB boot disk, you can use it directly; if not, you need to download the operating system image file first and It is written to a CD or USB bootable disk. Common operating systems include Windows, Linux, etc.
2. Set the boot sequence: Set the boot sequence in the BIOS to boot from the CD or USB boot disk. The specific operation method varies depending on the motherboard. Generally, you need to press F2, F10, Delete and other keys when booting to enter the BIOS setting interface.
3. Insert the installation media: Insert the installation CD or USB boot disk into the computer, and then press the power button to start the computer.
4. Install the operating system: Install the operating system according to the installation interface prompts. First, you need to select the installation language and regional settings, and then follow the installation wizard step by step to complete the installation. It should be noted that during the installation process, you will be prompted to select the installation location and partition settings. It is recommended to set them according to the actual situation.
5. Install the driver: After the installation is completed, you need to install the driver for the corresponding hardware to ensure the normal operation of the hardware. You can download the latest drivers from the official websites of hardware manufacturers such as motherboards, graphics cards, sound cards, etc., and then install them according to the prompts.
It should be noted that before installing the operating system, it is recommended to back up important data to avoid accidental loss. In addition, the installation steps of different operating systems may be slightly different. For specific operation methods, you need to refer to the installation guide of the operating system.
How to install the system after the computer is assembled?
First of all, you need to prepare an 8 GB U disk. If you are a novice, you can only go to an Internet cafe, or download the Laomaotao U disk PE system from the computers of colleagues and friends, or Chinese cabbage, U disk PE system, these two PE systems are the simplest and easiest to operate. They do not require complicated settings. You only need to download two softwares. For either one, install the U disk to the USB interface and proceed to the next step through the software prompts. , after the installation is completed, you can test whether the U disk PE system is installed through simulated startup
Of course, these two PE systems will release third-party software installations, such as 2345 browser, after the system is installed. Or 360 security software, some software installed on the C drive by default
You can also choose the relatively pure PE system installation software of micro PE. After the installation is completed, test the normal startup, and then copy the downloaded image system Go to, U disk
If you don’t use the U disk as the first boot item, enter the BIOS settings, just restart the computer and use the keyboard shortcuts
Ecs, F9, If you press F10, F11, F12, or delete while the hardware self-test is in progress, it will switch to the U disk boot mode. Select the U disk as the startup item to enter the PE system.
After entering the PE system, Assume that you are installing a 256GB solid-state drive and the installation system is WINDOWS 10. Then set the space of the C drive to 60 GB to 80 GB to ensure that in the future use of the system, it will not easily cause insufficient space on the C drive. phenomenon, affecting the system's operating data exchange, resulting in slow operation, and use the HD hard disk tool built into the PE system to select 4096 when partitioning the hard disk, which is the 4K alignment mode for partitioning, to avoid failure of the hard disk caused by not selecting 4K alignment. A series of situations such as slower reading and writing speeds occur
After the partition is completed, use the PE system's built-in system installation tool to copy the image file. Do not restart directly after copying. Select the startup file repair tool to repair the boot file. Perform a repair boot to avoid failure to recognize the boot file during the restart process, causing system installation failure.
How to install the system after the computer is assembled?
After the computer is assembled, you can use a U disk or CD, choose different startup methods to start the PE virtual desktop, and select the installed system in this desktop for installation. It takes about 10 to 20 minutes to install a W7 system.
How to install the system after assembling the computer by yourself?
1. On the system page, click Reinstall Now
2. Wait for the system to download
3. After the download is completed, click Restart Now
4. Click Select Windows7 system
5. Finally, the installation is successful
Can I install the Apple operating system on a computer that I assembled myself?
Can I install the Apple operating system on a computer that I assemble myself? 1. In theory, it is possible. 2. In fact, some computers do not work because of driver problems. 3. I installed Black Apple.
How to install the system after the host is assembled by itself?
First you need to download the windows system image installation file, generally in ISO and GHO formats.
Then make a U disk with boot function. You can use software such as "Lao Maotao" or "Dabaicai" to make it. After completion, copy the downloaded system image file to the specified directory.
Use U Start the computer and enter winpe (pre-installation environment). Before installing the system, you need to activate, partition and format the main partition of the hard disk, then start the one-click system installation, specify the installation directory and wait for completion.
Newly purchased computer. How to install a pirated system on an assembly machine?
Steps to check whether your system is genuine or pirated:
1. Return to the desktop, hold down the ALT key, and then double-click "Computer", that is You can open the "System" property interface.
2. Pull the right scroll bar to the bottom and you can see the words "Genuine Authorization".
3. If it is a brand machine. The CD sent is genuine.
4. If the system installed on the computer is different from the one on the CD, then the system installed on the computer may be a pirated version.
How to install the system on a newly assembled computer. And driver?
After the computer is newly assembled, a boot disk is required to install the system and driver. After the computer is assembled, we first need to prepare a U boot disk, which contains the installation. For the system installation package, we first turn on the computer host, and then change the system boot settings to U disk boot. We then insert the U disk into the host box and enter this way. Install the system in the disk. After installing the system, we will download the driver software master to install the driver
.The above is the detailed content of How to install the system on a computer that I assembled myself?. For more information, please follow other related articles on the PHP Chinese website!

linux设备节点是应用程序和设备驱动程序沟通的一个桥梁;设备节点被创建在“/dev”,是连接内核与用户层的枢纽,相当于硬盘的inode一样的东西,记录了硬件设备的位置和信息。设备节点使用户可以与内核进行硬件的沟通,读写设备以及其他的操作。

区别:1、open是UNIX系统调用函数,而fopen是ANSIC标准中的C语言库函数;2、open的移植性没fopen好;3、fopen只能操纵普通正规文件,而open可以操作普通文件、网络套接字等;4、open无缓冲,fopen有缓冲。

端口映射又称端口转发,是指将外部主机的IP地址的端口映射到Intranet中的一台计算机,当用户访问外网IP的这个端口时,服务器自动将请求映射到对应局域网内部的机器上;可以通过使用动态或固定的公共网络IP路由ADSL宽带路由器来实现。

在linux中,eof是自定义终止符,是“END Of File”的缩写;因为是自定义的终止符,所以eof就不是固定的,可以随意的设置别名,linux中按“ctrl+d”就代表eof,eof一般会配合cat命令用于多行文本输出,指文件末尾。

在linux中,可以利用“rpm -qa pcre”命令判断pcre是否安装;rpm命令专门用于管理各项套件,使用该命令后,若结果中出现pcre的版本信息,则表示pcre已经安装,若没有出现版本信息,则表示没有安装pcre。

linux查询mac地址的方法:1、打开系统,在桌面中点击鼠标右键,选择“打开终端”;2、在终端中,执行“ifconfig”命令,查看输出结果,在输出信息第四行中紧跟“ether”单词后的字符串就是mac地址。

在linux中,rpc是远程过程调用的意思,是Reomote Procedure Call的缩写,特指一种隐藏了过程调用时实际通信细节的IPC方法;linux中通过RPC可以充分利用非共享内存的多处理器环境,提高系统资源的利用率。

手机远程linux工具有:1、JuiceSSH,是一款功能强大的安卓SSH客户端应用,可直接对linux服务进行管理;2、Termius,可以利用手机来连接Linux服务器;3、Termux,一个强大的远程终端工具;4、向日葵远程控制等等。


Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

SAP NetWeaver Server Adapter for Eclipse
Integrate Eclipse with SAP NetWeaver application server.

Dreamweaver Mac version
Visual web development tools

SecLists
SecLists is the ultimate security tester's companion. It is a collection of various types of lists that are frequently used during security assessments, all in one place. SecLists helps make security testing more efficient and productive by conveniently providing all the lists a security tester might need. List types include usernames, passwords, URLs, fuzzing payloads, sensitive data patterns, web shells, and more. The tester can simply pull this repository onto a new test machine and he will have access to every type of list he needs.

SublimeText3 Linux new version
SublimeText3 Linux latest version

EditPlus Chinese cracked version
Small size, syntax highlighting, does not support code prompt function